/*
 * Copyright (c) 2015, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "fsl_common.h"
#include "clock_config.h"
#include "fsl_power.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*******************************************************************************
 * Variables
 ******************************************************************************/
/* System clock frequency. */
extern uint32_t SystemCoreClock;

/*******************************************************************************
 * Code
 ******************************************************************************/

void BOARD_BootClockVLPR(void)
{
    POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on so that we can switch to its 12MHz mode temporarily*/
    CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to 12MHz */
    CLOCK_SetupFROClocking(12000000);     /*!< Turn off high speed output of FRO */
    CLOCK_SetFLASHAccessCyclesForFreq(12000000); /*!< Set FLASH waitstates for core */
    POWER_SetVoltageForFreq(12000000);           /*!< Set voltage for core */
    SystemCoreClock = 12000000;                  /*!< Update information about frequency */
}

void BOARD_BootClockRUN(void)
{
    POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on so that we can switch to its 12MHz mode temporarily*/
    CLOCK_AttachClk(
        kFRO12M_to_MAIN_CLK);          /*!< Switch to 12MHz first to ensure we can change voltage without accidentally
                                       being below the voltage for current speed */
    POWER_SetVoltageForFreq(48000000); /*!< Set voltage for core */
    CLOCK_SetFLASHAccessCyclesForFreq(48000000); /*!< Set FLASH waitstates for core */
    CLOCK_SetupFROClocking(48000000);            /*!< Setup CPU to run off FRO 48MHz output*/
    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);        /*!< Switch main clock to 48MHz */
    SystemCoreClock = 48000000;                  /*!< Update information about frequency */
}

void BOARD_BootClockHSRUN(void)
{
    POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on so that we can switch to its 12MHz mode temporarily*/
    CLOCK_AttachClk(
        kFRO12M_to_MAIN_CLK);          /*!< Switch to 12MHz first to ensure we can change voltage without accidentally
                                       being below the voltage for current speed */
    POWER_SetVoltageForFreq(96000000); /*!< Set voltage for core */
    CLOCK_SetFLASHAccessCyclesForFreq(96000000); /*!< Set FLASH waitstates for core */
    CLOCK_SetupFROClocking(96000000);            /*!< Setup CPU to run off FRO 96MHz output*/
    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);        /*!< Switch main clock to 96MHz */
    SystemCoreClock = 96000000;                  /*!< Update information about frequency */
}