/** ****************************************************************************** * @file stm32u5xx_ll_utils.c * @author MCD Application Team * @brief UTILS LL module driver. ****************************************************************************** * @attention * * Copyright (c) 2021 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32u5xx_ll_utils.h" #include "stm32u5xx_ll_rcc.h" #include "stm32u5xx_ll_system.h" #include "stm32u5xx_ll_pwr.h" #include #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ /** @addtogroup STM32U5xx_LL_Driver * @{ */ /** @addtogroup UTILS_LL * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @addtogroup UTILS_LL_Private_Constants * @{ */ #define UTILS_MAX_FREQUENCY_SCALE0 160000000U /*!< Maximum frequency for system clock at power scale0, in Hz */ #define UTILS_MAX_FREQUENCY_SCALE1 100000000U /*!< Maximum frequency for system clock at power scale1, in Hz */ #define UTILS_MAX_FREQUENCY_SCALE2 50000000U /*!< Maximum frequency for system clock at power scale2, in Hz */ #define UTILS_MAX_FREQUENCY_SCALE3 24000000U /*!< Maximum frequency for system clock at power scale3, in Hz */ /* Defines used for PLL range */ #define UTILS_PLLVCO_INPUT_MIN 4000000U /*!< Frequency min for PLLVCO input, in Hz */ #define UTILS_PLLVCO_INPUT_MAX 16000000U /*!< Frequency max for PLLVCO input, in Hz */ #define UTILS_PLLVCO_OUTPUT_MIN 64000000U /*!< Frequency min for PLLVCO output, in Hz */ #define UTILS_PLLVCO_OUTPUT_MAX 344000000U /*!< Frequency max for PLLVCO output, in Hz */ /* Defines used for HSE range */ #define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */ #define UTILS_HSE_FREQUENCY_MAX 50000000U /*!< Frequency max for HSE frequency, in Hz */ /* Defines used for FLASH latency according to HCLK Frequency */ #define UTILS_SCALE1_LATENCY0_FREQ (32000000U) /*!< HCLK frequency to set FLASH latency 0 in power scale 1 */ #define UTILS_SCALE1_LATENCY1_FREQ (64000000U) /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */ #define UTILS_SCALE1_LATENCY2_FREQ (96000000U) /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */ #define UTILS_SCALE1_LATENCY3_FREQ (128000000U) /*!< HCLK frequency to set FLASH latency 3 in power scale 1 */ #define UTILS_SCALE1_LATENCY4_FREQ (160000000U) /*!< HCLK frequency to set FLASH latency 4 in power scale 1 */ #define UTILS_SCALE2_LATENCY0_FREQ (25000000U) /*!< HCLK frequency to set FLASH latency 0 in power scale 2 */ #define UTILS_SCALE2_LATENCY1_FREQ (50000000U) /*!< HCLK frequency to set FLASH latency 1 in power scale 2 */ #define UTILS_SCALE2_LATENCY2_FREQ (75000000U) /*!< HCLK frequency to set FLASH latency 2 in power scale 2 */ #define UTILS_SCALE2_LATENCY3_FREQ (100000000U) /*!< HCLK frequency to set FLASH latency 3 in power scale 2 */ #define UTILS_SCALE3_LATENCY0_FREQ (12500000U) /*!< HCLK frequency to set FLASH latency 0 in power scale 3 */ #define UTILS_SCALE3_LATENCY1_FREQ (25000000U) /*!< HCLK frequency to set FLASH latency 1 in power scale 3 */ #define UTILS_SCALE3_LATENCY2_FREQ (37500000U) /*!< HCLK frequency to set FLASH latency 2 in power scale 3 */ #define UTILS_SCALE3_LATENCY3_FREQ (50000000U) /*!< HCLK frequency to set FLASH latency 3 in power scale 3 */ #define UTILS_SCALE4_LATENCY0_FREQ (8000000U) /*!< HCLK frequency to set FLASH latency 0 in power scale 4 */ #define UTILS_SCALE4_LATENCY1_FREQ (16000000U) /*!< HCLK frequency to set FLASH latency 1 in power scale 4 */ #define UTILS_SCALE4_LATENCY2_FREQ (24000000U) /*!< HCLK frequency to set FLASH latency 2 in power scale 4 */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @addtogroup UTILS_LL_Private_Macros * @{ */ #define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) #define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ || ((__VALUE__) == LL_RCC_APB1_DIV_16)) #define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \ || ((__VALUE__) == LL_RCC_APB2_DIV_2) \ || ((__VALUE__) == LL_RCC_APB2_DIV_4) \ || ((__VALUE__) == LL_RCC_APB2_DIV_8) \ || ((__VALUE__) == LL_RCC_APB2_DIV_16)) #define IS_LL_UTILS_APB3_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB3_DIV_1) \ || ((__VALUE__) == LL_RCC_APB3_DIV_2) \ || ((__VALUE__) == LL_RCC_APB3_DIV_4) \ || ((__VALUE__) == LL_RCC_APB3_DIV_8) \ || ((__VALUE__) == LL_RCC_APB3_DIV_16)) #define IS_LL_UTILS_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) #define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((4U <= (__VALUE__)) && ((__VALUE__) <= 512U)) #define IS_LL_UTILS_PLLR_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 128U)) #define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__) ((UTILS_PLLVCO_INPUT_MIN <= (__VALUE__))\ && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX)) #define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__))\ && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX)) #define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE4) ? \ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE0) : \ (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? \ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \ (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) ? \ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2) : \ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE3)) #define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) #define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN)\ && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) /** * @} */ /* Private function prototypes -----------------------------------------------*/ /** @defgroup UTILS_LL_Private_Functions UTILS Private functions * @{ */ static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); static ErrorStatus UTILS_PLL_IsBusy(void); /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup UTILS_LL_Exported_Functions * @{ */ /** @addtogroup UTILS_LL_EF_DELAY * @{ */ /** * @brief This function configures the Cortex-M SysTick source to have 1ms time base. * @note When a RTOS is used, it is recommended to avoid changing the Systick * configuration by calling this function, for a delay use rather osDelay RTOS service. * @param HCLKFrequency HCLK frequency in Hz * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq * @retval None */ void LL_Init1msTick(uint32_t HCLKFrequency) { /* Use frequency provided in argument */ LL_InitTick(HCLKFrequency, 1000U); } /** * @brief This function provides accurate delay (in milliseconds) based * on SysTick counter flag * @note When a RTOS is used, it is recommended to avoid using blocking delay * and use rather osDelay service. * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which * will configure Systick to 1ms * @param Delay specifies the delay time length, in milliseconds. * @retval None */ void LL_mDelay(uint32_t Delay) { __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ uint32_t tmpDelay = Delay; /* Add this code to indicate that local variable is not used */ ((void)tmp); /* Add a period to guaranty minimum wait */ if (tmpDelay < LL_MAX_DELAY) { tmpDelay++; } while (tmpDelay != 0U) { if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) { tmpDelay--; } } } /** * @} */ /** @addtogroup UTILS_EF_SYSTEM * @brief System Configuration functions * @verbatim =============================================================================== ##### System Configuration functions ##### =============================================================================== [..] System, AHB and APB buses clocks configuration (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2, PCLK3 is 160000000 Hz. @endverbatim @internal Depending on the device voltage range, the maximum frequency should be adapted accordingly: (++) Table 1. HCLK clock frequency for STM32U5 devices (++) +-----------------------------------------------------------------------------------------------+ (++) | Latency | HCLK clock frequency (MHz) | (++) | |-----------------------------------------------------------------------------| (++) | | voltage range 1 | voltage range 2 | voltage range 3 | voltage range 4 | (++) | | 1.2 V | 1.1 V | 1.0 V | 0.9 V | (++) |-----------------|-------------------|------------------|------------------|-------------------| (++) |0WS(1 CPU cycles)| 0 < HCLK <= 32 | 0 < HCLK <= 25 | 0 < HCLK <= 12.5| 0 < HCLK <= 8 | (++) |-----------------|-------------------|------------------|------------------|-------------------| (++) |1WS(2 CPU cycles)| 32 < HCLK <= 64 | 25 < HCLK <= 50 | 12.5 < HCLK <= 25| 0 < HCLK <= 16 | (++) |-----------------|-------------------|------------------|------------------|-------------------| (++) |2WS(3 CPU cycles)| 64 < HCLK <= 96 | 50 < HCLK <= 75 | 25 < HCLK <= 37.5| 0 < HCLK <= 24 | (++) |-----------------|-------------------|------------------|------------------|-------------------| (++) |3WS(4 CPU cycles)| 96 < HCLK <= 128 | 75 < HCLK <= 100| 37.5 < HCLK <= 50| | (++) |-----------------|-------------------|------------------|------------------| | (++) |4WS(5 CPU cycles)| 128 < HCLK <= 160| | | | (++) +-----------------+-------------------+------------------+------------------+-------------------+ @endinternal * @{ */ /** * @brief This function sets directly SystemCoreClock CMSIS variable. * @note Variable can be calculated also through SystemCoreClockUpdate function. * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) * @retval None */ void LL_SetSystemCoreClock(uint32_t HCLKFrequency) { /* HCLK clock frequency */ SystemCoreClock = HCLKFrequency; } /** * @brief Update number of Flash wait states in line with new frequency and current voltage range. * @param HCLK_Frequency HCLK frequency * @retval An ErrorStatus enumeration value: * - SUCCESS: Latency has been modified * - ERROR: Latency cannot be modified */ ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency) { ErrorStatus status = SUCCESS; uint32_t timeout; uint32_t getlatency; uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ /* Frequency cannot be equal to 0 */ if (HCLK_Frequency == 0U) { status = ERROR; } else { if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) { if (HCLK_Frequency <= UTILS_SCALE1_LATENCY0_FREQ) { /* 0 < HCLK <= 32 => 0WS (1 CPU cycles) : Do nothing, keep latency to default LL_FLASH_LATENCY_0 */ } else if ((HCLK_Frequency <= UTILS_SCALE1_LATENCY1_FREQ)) { /* 32 < HCLK <=64 => 1WS (2 CPU cycles) */ latency = LL_FLASH_LATENCY_1; } else if (HCLK_Frequency <= UTILS_SCALE1_LATENCY2_FREQ) { /* 64 < HCLK <= 96 => 2WS (3 CPU cycles) */ latency = LL_FLASH_LATENCY_2; } else if (HCLK_Frequency <= UTILS_SCALE1_LATENCY3_FREQ) { /* 96 < HCLK <= 128 => 3WS (4 CPU cycles) */ latency = LL_FLASH_LATENCY_3; } else if (HCLK_Frequency <= UTILS_SCALE1_LATENCY4_FREQ) { /* 128 < HCLK <= 160 => 4WS (5 CPU cycles) */ latency = LL_FLASH_LATENCY_4; } else { status = ERROR; } /* else HCLK_Frequency <= 10MHz default LL_FLASH_LATENCY_0 0WS */ } else if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) { if (HCLK_Frequency <= UTILS_SCALE2_LATENCY0_FREQ) { /* 0 < HCLK <= 25 => 0WS (1 CPU cycles) : Do nothing, keep latency to default LL_FLASH_LATENCY_0 */ } else if (HCLK_Frequency <= UTILS_SCALE2_LATENCY1_FREQ) { /* 25 < HCLK <= 50 => 1WS (2 CPU cycles) */ latency = LL_FLASH_LATENCY_1; } else if (HCLK_Frequency <= UTILS_SCALE2_LATENCY2_FREQ) { /* 50 < HCLK <= 75 => 2WS (3 CPU cycles) */ latency = LL_FLASH_LATENCY_2; } else if (HCLK_Frequency <= UTILS_SCALE2_LATENCY3_FREQ) { /* 75 < HCLK <= 100 => 3WS (4 CPU cycles) */ latency = LL_FLASH_LATENCY_3; } else { status = ERROR; } /* else HCLK_Frequency <= 10MHz default LL_FLASH_LATENCY_0 0WS */ } else if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE3) { if (HCLK_Frequency <= UTILS_SCALE3_LATENCY0_FREQ) { /* 0 < HCLK <= 12.5 => 0WS (1 CPU cycles) : Do nothing, keep latency to default LL_FLASH_LATENCY_0 */ } else if (HCLK_Frequency <= UTILS_SCALE3_LATENCY1_FREQ) { /* 12.5 < HCLK <= 25 => 1WS (2 CPU cycles) */ latency = LL_FLASH_LATENCY_1; } else if (HCLK_Frequency <= UTILS_SCALE3_LATENCY2_FREQ) { /* 25 < HCLK <= 37.5 => 2WS (3 CPU cycles) */ latency = LL_FLASH_LATENCY_2; } else if (HCLK_Frequency <= UTILS_SCALE3_LATENCY3_FREQ) { /* 37.5 < HCLK <= 50 => 3WS (4 CPU cycles) */ latency = LL_FLASH_LATENCY_3; } else { status = ERROR; } /* else HCLK_Frequency <= 10MHz default LL_FLASH_LATENCY_0 0WS */ } else { if (HCLK_Frequency <= UTILS_SCALE4_LATENCY0_FREQ) { /* 0 < HCLK <= 8 => 0WS (1 CPU cycles) : Do nothing, keep latency to default LL_FLASH_LATENCY_0 */ } else if (HCLK_Frequency <= UTILS_SCALE4_LATENCY1_FREQ) { /* 8 < HCLK <= 16 => 1WS (2 CPU cycles) */ latency = LL_FLASH_LATENCY_1; } else if (HCLK_Frequency <= UTILS_SCALE4_LATENCY2_FREQ) { /* 16 < HCLK <= 24 => 2WS (3 CPU cycles) */ latency = LL_FLASH_LATENCY_2; } else { status = ERROR; } /* else HCLK_Frequency <= 10MHz default LL_FLASH_LATENCY_0 0WS */ } } if (status == SUCCESS) { LL_FLASH_SetLatency(latency); /* Check that the new number of wait states is taken into account to access the Flash memory by reading the FLASH_ACR register */ timeout = 2; do { /* Wait for Flash latency to be updated */ getlatency = LL_FLASH_GetLatency(); timeout--; } while ((getlatency != latency) && (timeout > 0U)); if (getlatency != latency) { status = ERROR; } } return status; } /** * @brief This function configures system clock with MSI as clock source of the PLL * @note The application needs to ensure that PLL1, PLL2 and/or PLL3 are disabled. * @note Function is based on the following formula: * - PLL1 output frequency = (((MSI frequency / PLL1M) * PLL1N) / PLL1R) * - PLL1M: ensure that the VCO input frequency ranges from 1 to 16 MHz (PLL1VCO_input = MSI frequency / PLL1M) * - PLL1N: ensure that the VCO output frequency is between 4 and 512 MHz (PLL1VCO_output = PLL1VCO_input * PLL1N) * - PLL1R: ensure that max frequency at 160 MHz is reached (PLL1VCO_output / PLL1R) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL1. * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: Max frequency configuration done * - ERROR: Max frequency configuration not done */ ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status = SUCCESS; uint32_t pllfreq; uint32_t msi_range; /* Check if one of the PLL is enabled */ if (UTILS_PLL_IsBusy() == SUCCESS) { /* Get the current MSI range */ if (LL_RCC_MSI_IsEnabledRangeSelect() != 0U) { msi_range = LL_RCC_MSIS_GetRange(); switch (msi_range) { case LL_RCC_MSISRANGE_15: /* MSI = 100 kHz */ case LL_RCC_MSISRANGE_14: /* MSI = 150 kHz */ case LL_RCC_MSISRANGE_13: /* MSI = 200 kHz */ case LL_RCC_MSISRANGE_12: /* MSI = 400 kHz */ case LL_RCC_MSISRANGE_11: /* MSI = 768 kHz */ case LL_RCC_MSISRANGE_10: /* MSI = 1.024 MHz*/ case LL_RCC_MSISRANGE_9: /* MSI = 1.536 MHz*/ case LL_RCC_MSISRANGE_8: /* MSI = 3.072 MHz*/ case LL_RCC_MSISRANGE_7: /* MSI = 1 MHz */ case LL_RCC_MSISRANGE_6: /* MSI = 1.5 MHz */ case LL_RCC_MSISRANGE_5: /* MSI = 2 MHz */ /* PLLVCO input frequency is less then 4 MHz*/ status = ERROR; break; case LL_RCC_MSISRANGE_0: /* MSI = 48 MHz */ case LL_RCC_MSISRANGE_1: /* MSI = 24 MHz */ case LL_RCC_MSISRANGE_2: /* MSI = 16 MHz */ case LL_RCC_MSISRANGE_3: /* MSI = 12 MHz */ case LL_RCC_MSISRANGE_4: /* MSI = 4 MHz */ default: break; } } else { msi_range = LL_RCC_MSIS_GetRangeAfterStandby(); switch (msi_range) { case LL_RCC_MSISSRANGE_5: /* MSI = 2 MHz */ case LL_RCC_MSISSRANGE_6: /* MSI = 1.5 MHz */ case LL_RCC_MSISSRANGE_7: /* MSI = 1 MHz */ case LL_RCC_MSISSRANGE_8: /* MSI = 3.072 MHz*/ /* PLLVCO input frequency is less then 4 MHz */ status = ERROR; break; case LL_RCC_MSISSRANGE_4: /* MSI = 4 MHz */ default: break; } } /* Main PLL configuration and activation */ if (status != ERROR) { /* Calculate the new PLL output frequency */ pllfreq = UTILS_GetPLLOutputFrequency(__LL_RCC_CALC_MSIS_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(), msi_range), UTILS_PLLInitStruct); /* Enable MSI if not enabled */ if (LL_RCC_MSIS_IsReady() != 1U) { LL_RCC_MSIS_Enable(); while ((LL_RCC_MSIS_IsReady() != 1U)) { /* Wait for MSI ready */ } } /* Configure PLL1 */ LL_RCC_PLL1_ConfigDomain_SYS(LL_RCC_PLL1SOURCE_MSIS, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, UTILS_PLLInitStruct->PLLR); /* Enable PLL and switch system clock to PLL */ status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); } } else { /* Current PLL configuration cannot be modified */ status = ERROR; } return status; } /** * @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL * @note The application need to ensure that PLL1, PLL2 and/or PLL3 are disabled. * @note Function is based on the following formula: * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLR) * - PLL1M: ensure that the VCO input frequency ranges from 1 to 16 MHz (PLL1VCO_input = MSI frequency / PLL1M) * - PLL1N: ensure that the VCO output frequency is between 4 and 512 MHz (PLL1VCO_output = PLL1VCO_input * PLL1N) * - PLL1R: ensure that max frequency at 160 MHz is reached (PLL1VCO_output / PLL1R) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: Max frequency configuration done * - ERROR: Max frequency configuration not done */ ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status; uint32_t pllfreq; /* Check if one of the PLL is enabled */ if (UTILS_PLL_IsBusy() == SUCCESS) { /* Calculate the new PLL output frequency */ pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); /* Enable HSI if not enabled */ if (LL_RCC_HSI_IsReady() != 1U) { LL_RCC_HSI_Enable(); while (LL_RCC_HSI_IsReady() != 1U) { /* Wait for HSI ready */ } } /* Configure PLL */ LL_RCC_PLL1_ConfigDomain_SYS(LL_RCC_PLL1SOURCE_HSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, UTILS_PLLInitStruct->PLLR); /* Enable PLL and switch system clock to PLL */ status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); } else { /* Current PLL configuration cannot be modified */ status = ERROR; } return status; } /** * @brief This function configures system clock with HSE as clock source of the PLL * @note The application need to ensure that PLL, PLLSAI1 and/or PLLSAI2 are disabled. * @note Function is based on the following formula: * - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLR) * - PLL1M: ensure that the VCO input frequency ranges from 1 to 16 MHz (PLL1VCO_input = MSI frequency / PLL1M) * - PLL1N: ensure that the VCO output frequency is between 4 and 512 MHz (PLL1VCO_output = PLL1VCO_input * PLL1N) * - PLL1R: ensure that max frequency at 160 MHz is reached (PLL1VCO_output / PLL1R) * @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 50000000 * @param HSEBypass This parameter can be one of the following values: * @arg @ref LL_UTILS_HSEBYPASS_ON * @arg @ref LL_UTILS_HSEBYPASS_OFF * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: Max frequency configuration done * - ERROR: Max frequency configuration not done */ ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status; uint32_t pllfreq; /* Check the parameters */ assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); /* Check if one of the PLL is enabled */ if (UTILS_PLL_IsBusy() == SUCCESS) { /* Calculate the new PLL output frequency */ pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); /* Enable HSE if not enabled */ if (LL_RCC_HSE_IsReady() != 1U) { /* Check if need to enable HSE bypass feature or not */ if (HSEBypass == LL_UTILS_HSEBYPASS_ON) { LL_RCC_HSE_EnableBypass(); } else { LL_RCC_HSE_DisableBypass(); } /* Enable HSE */ LL_RCC_HSE_Enable(); while (LL_RCC_HSE_IsReady() != 1U) { /* Wait for HSE ready */ } } /* Configure PLL */ LL_RCC_PLL1_ConfigDomain_SYS(LL_RCC_PLL1SOURCE_HSE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, UTILS_PLLInitStruct->PLLR); /* Enable PLL and switch system clock to PLL */ status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); } else { /* Current PLL configuration cannot be modified */ status = ERROR; } return status; } /** * @} */ /** * @} */ /** @addtogroup UTILS_LL_Private_Functions * @{ */ /** * @brief Function to check that PLL can be modified * @param PLL_InputFrequency PLL input frequency (in Hz) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. * @retval PLL output frequency (in Hz) */ static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) { uint32_t pllfreq; /* Check the parameters */ assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); assert_param(IS_LL_UTILS_PLLR_VALUE(UTILS_PLLInitStruct->PLLR)); /* Check different PLL parameters according to RM */ /* - PLLM: ensure that the VCO input frequency ranges from 1 to 16 MHz. */ pllfreq = PLL_InputFrequency / (UTILS_PLLInitStruct->PLLM); assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq)); /* - PLLN: ensure that the VCO output frequency is between 4 and 512 MHz.*/ pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN); assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq)); /* - PLLR: ensure that max frequency at 160 MHz is reached */ pllfreq = pllfreq / (UTILS_PLLInitStruct->PLLR); assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq)); return pllfreq; } /** * @brief Function to check that PLL can be modified * @retval An ErrorStatus enumeration value: * - SUCCESS: PLL modification can be done * - ERROR: PLL is busy */ static ErrorStatus UTILS_PLL_IsBusy(void) { ErrorStatus status = SUCCESS; /* Check if PLL1 is busy*/ if (LL_RCC_PLL1_IsReady() != 0U) { /* PLL configuration cannot be modified */ status = ERROR; } /* Check if PLL2 is busy*/ if (LL_RCC_PLL2_IsReady() != 0U) { /* PLL2 configuration cannot be modified */ status = ERROR; } /* Check if PLL3 is busy*/ if (LL_RCC_PLL3_IsReady() != 0U) { /* PLL3 configuration cannot be modified */ status = ERROR; } return status; } /** * @brief Function to enable PLL and switch system clock to PLL * @param SYSCLK_Frequency SYSCLK frequency * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: No problem to switch system to PLL * - ERROR: Problem to switch system to PLL */ static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status = SUCCESS; uint32_t hclk_frequency; assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider)); assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider)); assert_param(IS_LL_UTILS_APB3_DIV(UTILS_ClkInitStruct->APB3CLKDivider)); /* Calculate HCLK frequency */ hclk_frequency = __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider); /* Increasing the number of wait states because of higher CPU frequency */ if (SystemCoreClock < hclk_frequency) { /* Set FLASH latency to highest latency */ status = LL_SetFlashLatency(hclk_frequency); } /* Update system clock configuration */ if (status == SUCCESS) { /* Enable PLL1 */ LL_RCC_PLL1_Enable(); LL_RCC_PLL1_EnableDomain_SYS(); while (LL_RCC_PLL1_IsReady() != 1U) { /* Wait for PLL ready */ } /* Sysclk activation on the main PLL */ LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider); LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL1); while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL1) { /* Wait for system clock switch to PLL */ } /* Set APB1, APB2 & APB3 prescaler*/ LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider); LL_RCC_SetAPB3Prescaler(UTILS_ClkInitStruct->APB3CLKDivider); } /* Decreasing the number of wait states because of lower CPU frequency */ if (SystemCoreClock > hclk_frequency) { /* Set FLASH latency to lowest latency */ status = LL_SetFlashLatency(hclk_frequency); } /* Update SystemCoreClock variable */ if (status == SUCCESS) { LL_SetSystemCoreClock(hclk_frequency); } return status; } /** * @} */ /** * @} */ /** * @} */