/*
FreeRTOS V4.1.1 - Copyright (C) 2003-2006 Richard Barry.
MCF5235 Port - Copyright (C) 2006 Christian Walter.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License** as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
FreeRTOS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with FreeRTOS; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes FreeRTOS, without being obliged to provide
the source code for any proprietary components. See the licensing section
of https://www.FreeRTOS.org for full details of how and when the exception
can be applied.
***************************************************************************
***************************************************************************
* *
* Get the FreeRTOS eBook! See https://www.FreeRTOS.org/Documentation *
* *
* This is a concise, step by step, 'hands on' guide that describes both *
* general multitasking concepts and FreeRTOS specifics. It presents and *
* explains numerous examples that are written using the FreeRTOS API. *
* Full source code for all the examples is provided in an accompanying *
* .zip file. *
* *
***************************************************************************
***************************************************************************
Please ensure to read the configuration and relevant port sections of the
online documentation.
https://www.FreeRTOS.org - Documentation, latest information, license and
contact details.
https://www.highintegritysystems.com/safertos/ - A version that is
certified for use in safety critical systems.
https://www.highintegritysystems.com/openrtos/ - Commercial support,
development, porting,
licensing and training services.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
/* ------------------------ Data types for Coldfire ----------------------- */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE unsigned int
#define portBASE_TYPE int
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/* ------------------------ Architecture specifics ------------------------ */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portTRAP_YIELD 0 /* Trap 0 */
#define portIPL_MAX 7 /* Only NMI interrupt 7 allowed. */
/* ------------------------ FreeRTOS macros for port ---------------------- */
/*
* This function must be called when the current state of the active task
* should be stored. It must be called immediately after exception
* processing from the CPU, i.e. there exists a Coldfire exception frame at
* the current position in the stack. The function reserves space on
* the stack for the CPU registers and other task dependent values (e.g
* ulCriticalNesting) and updates the top of the stack in the TCB.
*/
#define portSAVE_CONTEXT() \
asm volatile ( /* reserve space for task state. */ \
"lea.l (-64, %sp), %sp\n\t" \
/* push data register %d0-%d7/%a0-%a6 on stack. */ \
"movem.l %d0-%d7/%a0-%a6, (%sp)\n\t" \
/* push ulCriticalNesting counter on stack. */ \
"lea.l (60, %sp), %a0\n\t" \
"move.l ulCriticalNesting, (%a0)\n\t" \
/* set the new top of the stack in the TCB. */ \
"move.l pxCurrentTCB, %a0\n\t" \
"move.l %sp, (%a0)");
/*.
* This function restores the current active and continues its execution.
* It loads the current TCB and restores the processor registers, the
* task dependent values (e.g ulCriticalNesting). Finally execution
* is continued by executing an rte instruction.
*/
#define portRESTORE_CONTEXT() \
asm volatile ( "move.l pxCurrentTCB, %sp\n\t" \
"move.l (%sp), %sp\n\t" \
/* stack pointer now points to the saved registers. */ \
"movem.l (%sp), %d0-%d7/%a0-%a6\n\t" \
/* restore ulCriticalNesting counter from stack. */ \
"lea.l (%sp, 60), %sp\n\t" \
"move.l (%sp)+, ulCriticalNesting\n\t" \
/* stack pointer now points to exception frame. */ \
"rte\n\t" );
#define portENTER_CRITICAL() \
vPortEnterCritical();
#define portEXIT_CRITICAL() \
vPortExitCritical();
#define portSET_IPL( xIPL ) \
asm_set_ipl( xIPL )
#define portDISABLE_INTERRUPTS() \
do { ( void )portSET_IPL( portIPL_MAX ); } while( 0 )
#define portENABLE_INTERRUPTS() \
do { ( void )portSET_IPL( 0 ); } while( 0 )
#define portYIELD() \
asm volatile ( " trap %0\n\t" : : "i"(portTRAP_YIELD) )
#define portNOP() \
asm volatile ( "nop\n\t" )
#define portENTER_SWITCHING_ISR() \
asm volatile ( "move.w #0x2700, %sr" ); \
/* Save the context of the interrupted task. */ \
portSAVE_CONTEXT( ); \
{
#define portEXIT_SWITCHING_ISR( SwitchRequired ) \
/* If a switch is required we call vTaskSwitchContext(). */ \
if( SwitchRequired ) \
{ \
vTaskSwitchContext( ); \
} \
} \
portRESTORE_CONTEXT( );
/* ------------------------ Function prototypes --------------------------- */
void vPortEnterCritical( void );
void vPortExitCritical( void );
int asm_set_ipl( uint32_t int uiNewIPL );
/* ------------------------ Compiler specifics ---------------------------- */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) \
void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) \
void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */