controller:
  ## The name of the Ingress controller daemonset or deployment.
  ## Autogenerated if not set or set to "".
  # name: nginx-ingress

  ## The kind of the Ingress controller installation - deployment or daemonset.
  kind: deployment

  ## Deploys the Ingress controller for NGINX Plus.
  nginxplus: false

  # Timeout in milliseconds which the Ingress Controller will wait for a successful NGINX reload after a change or at the initial start.
  # Default is 4000 (default is 20000 instead if enable-app-protect is true)
  # If set to 0, default values will be used.
  nginxReloadTimeout: 0

  ## Support for App Protect
  appprotect:
    ## Enable the App Protect module in the Ingress Controller.
    enable: false

  ## Enables the Ingress controller pods to use the host's network namespace.
  hostNetwork: false

  ## Enables debugging for NGINX. Uses the nginx-debug binary. Requires error-log-level: debug in the ConfigMap via `controller.config.entries`.
  nginxDebug: false

  ## The log level of the Ingress Controller.
  logLevel: 1

  ## A list of custom ports to expose on the NGINX ingress controller pod. Follows the conventional Kubernetes yaml syntax for container ports.
  customPorts: []

  image:
    ## The image repository of the Ingress controller.
    repository: nginx/nginx-ingress

    ## The tag of the Ingress controller image.
    tag: "edge"

    ## The pull policy for the Ingress controller image.
    pullPolicy: IfNotPresent

  config:
    ## The name of the ConfigMap used by the Ingress controller.
    ## Autogenerated if not set or set to "".
    # name: nginx-config

    ## The annotations of the Ingress Controller configmap.
    annotations: {}

    ## The entries of the ConfigMap for customizing NGINX configuration.
    entries: {}

  ## It is recommended to use your own TLS certificates and keys
  defaultTLS:
    ## The base64-encoded TLS certificate for the default HTTPS server. If not specified, a pre-generated self-signed certificate is used.
    ## Note: It is recommended that you specify your own certificate.
    cert: 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

    ## The base64-encoded TLS key for the default HTTPS server. Note: If not specified, a pre-generated key is used.
    ## Note: It is recommended that you specify your own key.
    key: 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

    ## The secret with a TLS certificate and key for the default HTTPS server.
    ## The value must follow the following format: `<namespace>/<name>`.
    ## Used as an alternative to specifying a certificate and key using `controller.defaultTLS.cert` and `controller.defaultTLS.key` parameters.
    ## Format: <namespace>/<secret_name>
    secret:

  wildcardTLS:
    ## The base64-encoded TLS certificate for every Ingress host that has TLS enabled but no secret specified.
    ## If the parameter is not set, for such Ingress hosts NGINX will break any attempt to establish a TLS connection.
    cert: ""

    ## The base64-encoded TLS key for every Ingress host that has TLS enabled but no secret specified.
    ## If the parameter is not set, for such Ingress hosts NGINX will break any attempt to establish a TLS connection.
    key: ""

    ## The secret with a TLS certificate and key for every Ingress host that has TLS enabled but no secret specified.
    ## The value must follow the following format: `<namespace>/<name>`.
    ## Used as an alternative to specifying a certificate and key using `controller.wildcardTLS.cert` and `controller.wildcardTLS.key` parameters.
    ## Format: <namespace>/<secret_name>
    secret:

  ## The node selector for pod assignment for the Ingress controller pods.
  nodeSelector: {}

  ## The termination grace period of the Ingress controller pod.
  terminationGracePeriodSeconds: 30

  ## The resources of the Ingress controller pods.
  resources: {}
    # limits:
    #   cpu: 100m
    #   memory: 64Mi
    # requests:
    #   cpu: 100m
    #   memory: 64Mi

  ## The tolerations of the Ingress controller pods.
  tolerations: []

  ## The affinity of the Ingress controller pods.
  affinity: {}

  ## The volumes of the Ingress controller pods.
  volumes: []
  # - name: extra-conf
  #   configMap:
  #     name: extra-conf

  ## The volumeMounts of the Ingress controller pods.
  volumeMounts: []
  # - name: extra-conf
  #   mountPath: /etc/nginx/conf.d/extra.conf
  #   subPath: extra.conf

  ## The number of replicas of the Ingress controller deployment.
  replicaCount: 1

  ## A class of the Ingress controller.

  ## For Kubernetes >= 1.18, a corresponding IngressClass resource with the name equal to the class must be deployed. Otherwise,
  ## the Ingress Controller will fail to start.
  ## The Ingress controller only processes resources that belong to its class - i.e. have the "ingressClassName" field resource equal to the class.

  ## For Kubernetes < 1.18, the Ingress Controller only processes resources that belong to its class -
  ## i.e have the annotation "kubernetes.io/ingress.class" (for Ingress resources)
  ## or field "ingressClassName" (for VirtualServer/VirtualServerRoute/TransportServer resources) equal to the class.
  ## Additionally, the Ingress Controller processes resources that do not have the class set,
  ## which can be disabled by setting the controller.useIngressClassOnly parameter to true.

  ## The Ingress Controller processes all the VirtualServer/VirtualServerRoute/TransportServer resources that do not have the "ingressClassName" field for all versions of kubernetes.
  ingressClass: nginx

  ## For kubernetes versions >= 1.18 this flag will be IGNORED.
  ## Ignore Ingress resources without the "kubernetes.io/ingress.class" annotation
  useIngressClassOnly: false

  ## Only for Kubernetes >= 1.18
  ## New Ingresses without an ingressClassName field specified will be assigned the class specified in `controller.ingressClass`.
  setAsDefaultIngress: false

  ## Namespace to watch for Ingress resources. By default the Ingress controller watches all namespaces.
  watchNamespace: ""

  ## Enable the custom resources.
  enableCustomResources: true

  ## Enable preview policies.
  enablePreviewPolicies: false

  ## Enable TLS Passthrough on port 443. Requires controller.enableCustomResources.
  enableTLSPassthrough: false

  globalConfiguration:
    ## Creates the GlobalConfiguration custom resource. Requires controller.enableCustomResources.
    create: false

    ## The spec of the GlobalConfiguration for defining the global configuration parameters of the Ingress Controller.
    spec: {}
      # listeners:
      # - name: dns-udp
      #   port: 5353
      #   protocol: UDP
      # - name: dns-tcp
      #   port: 5353
      #   protocol: TCP

  ## Enable custom NGINX configuration snippets in VirtualServer, VirtualServerRoute and TransportServer resources.
  enableSnippets: false

  ## Add a location based on the value of health-status-uri to the default server. The location responds with the 200 status code for any request.
  ## Useful for external health-checking of the Ingress controller.
  healthStatus: false

  ## Sets the URI of health status location in the default server. Requires controller.healthStatus.
  healthStatusURI: "/nginx-health"

  nginxStatus:
    ## Enable the NGINX stub_status, or the NGINX Plus API.
    enable: true

    ## Set the port where the NGINX stub_status or the NGINX Plus API is exposed.
    port: 8080

    ## Add IPv4 IP/CIDR blocks to the allow list for NGINX stub_status or the NGINX Plus API. Separate multiple IP/CIDR by commas.
    allowCidrs: "127.0.0.1"

  service:
    ## Creates a service to expose the Ingress controller pods.
    create: true

    ## The type of service to create for the Ingress controller.
    type: LoadBalancer

    ## The externalTrafficPolicy of the service. The value Local preserves the client source IP.
    externalTrafficPolicy: Local

    ## The annotations of the Ingress controller service.
    annotations: 
      service.beta.kubernetes.io/aws-load-balancer-internal: "true"
      service.beta.kubernetes.io/aws-load-balancer-type: "nlb"

    ## The extra labels of the service.
    extraLabels: {}

    ## The static IP address for the load balancer. Requires controller.service.type set to LoadBalancer. The cloud provider must support this feature.
    loadBalancerIP: ""

    ## The list of external IPs for the Ingress controller service.
    externalIPs: []

    ## The IP ranges (CIDR) that are allowed to access the load balancer. Requires controller.service.type set to LoadBalancer. The cloud provider must support this feature.
    loadBalancerSourceRanges: []

    ## The name of the service
    ## Autogenerated if not set or set to "".
    # name: nginx-ingress

    httpPort:
      ## Enables the HTTP port for the Ingress controller service.
      enable: true

      ## The HTTP port of the Ingress controller service.
      port: 80

      ## The custom NodePort for the HTTP port. Requires controller.service.type set to NodePort.
      nodePort: ""

      ## The HTTP port on the POD where the Ingress controller service is running.
      targetPort: 80

    httpsPort:
      ## Enables the HTTPS port for the Ingress controller service.
      enable: true

      ## The HTTPS port of the Ingress controller service.
      port: 443

      ## The custom NodePort for the HTTPS port. Requires controller.service.type set to NodePort.
      nodePort: ""

      ## The HTTPS port on the POD where the Ingress controller service is running.
      targetPort: 443

    ## A list of custom ports to expose through the Ingress controller service. Follows the conventional Kubernetes yaml syntax for service ports.
    customPorts: []

  serviceAccount:
    ## The name of the service account of the Ingress controller pods. Used for RBAC.
    ## Autogenerated if not set or set to "".
    # name: nginx-ingress

    ## The name of the secret containing docker registry credentials.
    ## Secret must exist in the same namespace as the helm release.
    imagePullSecretName: ""

  reportIngressStatus:
    ## Updates the address field in the status of Ingress resources with an external address of the Ingress controller.
    ## You must also specify the source of the external address either through an external service via controller.reportIngressStatus.externalService,
    ## controller.reportIngressStatus.ingressLink or the external-status-address entry in the ConfigMap via controller.config.entries.
    ## Note: controller.config.entries.external-status-address takes precedence over the others.
    enable: true

    ## Specifies the name of the service with the type LoadBalancer through which the Ingress controller is exposed externally.
    ## The external address of the service is used when reporting the status of Ingress, VirtualServer and VirtualServerRoute resources.
    ## controller.reportIngressStatus.enable must be set to true.
    ## The default is autogenerated and matches the created service (see controller.service.create).
    # externalService: nginx-ingress

    ## Specifies the name of the IngressLink resource, which exposes the Ingress Controller pods via a BIG-IP system.
    ## The IP of the BIG-IP system is used when reporting the status of Ingress, VirtualServer and VirtualServerRoute resources.
    ## controller.reportIngressStatus.enable must be set to true.
    ingressLink: ""

    ## Enable Leader election to avoid multiple replicas of the controller reporting the status of Ingress resources. controller.reportIngressStatus.enable must be set to true.
    enableLeaderElection: true

    ## Specifies the name of the ConfigMap, within the same namespace as the controller, used as the lock for leader election. controller.reportIngressStatus.enableLeaderElection must be set to true.
    ## Autogenerated if not set or set to "".
    # leaderElectionLockName: "nginx-ingress-leader-election"

    ## The annotations of the leader election configmap.
    annotations: {}

  pod:
    ## The annotations of the Ingress Controller pod.
    annotations: {}

  ## The PriorityClass of the ingress controller pods.
  priorityClassName:

  readyStatus:
    ## Enables readiness endpoint "/nginx-ready". The endpoint returns a success code when NGINX has loaded all the config after startup.
    enable: true

    ## Set the port where the readiness endpoint is exposed.
    port: 8081

  ## Enable collection of latency metrics for upstreams. Requires prometheus.create.
  enableLatencyMetrics: false

rbac:
  ## Configures RBAC.
  create: true

prometheus:
  ## Expose NGINX or NGINX Plus metrics in the Prometheus format.
  create: true

  ## Configures the port to scrape the metrics.
  port: 9113