/* * FreeRTOS Kernel V10.2.0 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a copy of * this software and associated documentation files (the "Software"), to deal in * the Software without restriction, including without limitation the rights to * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of * the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * http://aws.amazon.com/freertos * http://www.FreeRTOS.org */ /* * Copyright (C) 2011-2019, Marvell International Ltd. * All Rights Reserved. */ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. * * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ #define configUSE_PREEMPTION 1 #define configUSE_IDLE_HOOK 0 #define configUSE_TICK_HOOK 0 /* #define configCPU_CLOCK_HZ ( ( unsigned long ) 200000000 ) */ #define configCPU_CLOCK_HZ ( board_cpu_freq( ) ) #define configTICK_RATE_HZ ( ( portTickType ) 1000 ) #define configMAX_PRIORITIES ( 7 ) #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 256 ) /* #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 72 * 1024 ) ) */ #define configMAX_TASK_NAME_LEN ( 16 ) #define configUSE_TRACE_FACILITY 1 #define configUSE_STATS_FORMATTING_FUNCTIONS 1 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 #define configUSE_MUTEXES 1 #if ( CONFIG_ENABLE_STACK_OVERFLOW_CHECK == 1 ) #define configCHECK_FOR_STACK_OVERFLOW 2 #else #define configCHECK_FOR_STACK_OVERFLOW 0 #endif #define configUSE_MALLOC_FAILED_HOOK 0 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 /* Currently the TCP/IP stack is using dynamic allocation, and the MQTT task is * using static allocation. */ #define configSUPPORT_DYNAMIC_ALLOCATION 1 #define configSUPPORT_STATIC_ALLOCATION 1 /* Assert call defined for debug builds. */ void vAssertCalled( const char * pcFile, uint32_t ulLine ); /* Board CPU frequency */ int board_cpu_freq(); #define configAPPLICATION_ALLOCATED_HEAP 1 #define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for(;;) {;} } /* Enable this if run time statistics are to be enabled. The support functions are already added in WMSDK */ #if ( CONFIG_ENABLE_RUNTIME_STATS == 1 ) #define configGENERATE_RUN_TIME_STATS 1 #else #define configGENERATE_RUN_TIME_STATS 0 #endif #if ( configGENERATE_RUN_TIME_STATS == 1 ) /* wmsdk: Prototype of function defined in wmsdk */ void portWMSDK_CONFIGURE_TIMER_FOR_RUN_TIME_STATS(void); unsigned long portWMSDK_GET_RUN_TIME_COUNTER_VALUE(void); #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS \ portWMSDK_CONFIGURE_TIMER_FOR_RUN_TIME_STATS #define portGET_RUN_TIME_COUNTER_VALUE \ portWMSDK_GET_RUN_TIME_COUNTER_VALUE #endif /* configGENERATE_RUN_TIME_STATS */ #define configUSE_CO_ROUTINES 0 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) /* Use application defined heap region */ #define configAPPLICATION_ALLOCATED_HEAP 1 /* Software timer definitions. */ #define configUSE_TIMERS 1 #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) #define configTIMER_QUEUE_LENGTH 5 #define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE ) /* Set the following definitions to 1 to include the API function, or zero to exclude the API function. */ #define INCLUDE_vTaskPrioritySet 1 #define INCLUDE_uxTaskPriorityGet 1 #define INCLUDE_vTaskDelete 1 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_uxTaskGetStackHighWaterMark 0 #define INCLUDE_pcTaskGetTaskName 1 #define configKERNEL_INTERRUPT_PRIORITY 0xf0 #define configMAX_SYSCALL_INTERRUPT_PRIORITY 0xa0 /* equivalent to 0xa0, or priority 5. */ #define xPortPendSVHandler PendSV_IRQHandler #define xPortSysTickHandler SysTick_IRQHandler #define vPortSVCHandler SVC_IRQHandler /* This demo creates a virtual network connection by accessing the raw Ethernet * or WiFi data to and from a real network connection. Many computers have more * than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell * the demo which real port should be used to create the virtual port. The ports * available are displayed on the console when the application is executed. For * example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4 * results in the wired network being used, while setting * configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being * used. */ #define configNETWORK_INTERFACE_TO_USE 2L /* The address of an echo server that will be used by the two demo echo client * tasks: * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html, * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html. */ #define configECHO_SERVER_ADDR0 192 #define configECHO_SERVER_ADDR1 168 #define configECHO_SERVER_ADDR2 1 #define configECHO_SERVER_ADDR3 4 #define configTCP_ECHO_CLIENT_PORT 7 /* Default MAC address configuration. The demo creates a virtual network * connection that uses this MAC address by accessing the raw Ethernet/WiFi data * to and from a real network connection on the host PC. See the * configNETWORK_INTERFACE_TO_USE definition above for information on how to * configure the real network connection to use. */ #define configMAC_ADDR0 0x00 #define configMAC_ADDR1 0x00 #define configMAC_ADDR2 0x00 #define configMAC_ADDR3 0x00 #define configMAC_ADDR4 0x00 #define configMAC_ADDR5 0x00 /* Default IP address configuration. Used in ipconfigUSE_DHCP is set to 0, or * ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ #define configIP_ADDR0 0 #define configIP_ADDR1 0 #define configIP_ADDR2 0 #define configIP_ADDR3 0 /* Default gateway IP address configuration. Used in ipconfigUSE_DHCP is set to * 0, or ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ #define configGATEWAY_ADDR0 0 #define configGATEWAY_ADDR1 0 #define configGATEWAY_ADDR2 0 #define configGATEWAY_ADDR3 0 /* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and * 208.67.220.220. Used in ipconfigUSE_DHCP is set to 0, or ipconfigUSE_DHCP is * set to 1 but a DNS server cannot be contacted.*/ #define configDNS_SERVER_ADDR0 0 #define configDNS_SERVER_ADDR1 0 #define configDNS_SERVER_ADDR2 0 #define configDNS_SERVER_ADDR3 0 /* Default netmask configuration. Used in ipconfigUSE_DHCP is set to 0, or * ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ #define configNET_MASK0 255 #define configNET_MASK1 255 #define configNET_MASK2 255 #define configNET_MASK3 0 /* The UDP port to which print messages are sent. */ #define configPRINT_PORT ( 15000 ) #define configPROFILING ( 0 ) /* Pseudo random number generater used by some demo tasks. */ extern uint32_t ulRand(); #define configRAND32() ulRand() /* FIX ME: The platform FreeRTOS is running on. */ #define configPLATFORM_NAME "MW320" /* Header required for the tracealyzer recorder library. */ /* #include "trcRecorder.h" */ #define ENABLE_LOGGING #ifdef ENABLE_LOGGING /* The function that implements FreeRTOS printf style output, and the macro * that maps the configPRINTF() macros to that function. */ extern void vLoggingPrintf( const char * pcFormat, ... ); #define configPRINTF( X ) vLoggingPrintf X /* Non-format version thread-safe print */ extern void vLoggingPrint( const char * pcMessage ); #define configPRINT( X ) vLoggingPrint( X ) #else #define configPRINTF( X ) #define configPRINT( X ) #endif /* Map the logging task's printf to the board specific output function. */ #include void wm_printf(const char *format, ...); #define configPRINT_STRING( X ) wm_printf( X ); /* FIX ME: Change to your devices console print acceptance function. */ /* Sets the length of the buffers into which logging messages are written - so * also defines the maximum length of each log message. */ #define configLOGGING_MAX_MESSAGE_LENGTH 100 /* Set to 1 to prepend each log message with a message number, the task name, * and a time stamp. */ #define configLOGGING_INCLUDE_TIME_AND_TASK_NAME 1 /* The size of the global output buffer that is available for use when there * are multiple command interpreters running at once (for example, one on a UART * and one on TCP/IP). This is done to prevent an output buffer being defined by * each implementation - which would waste RAM. In this case, there is only one * command interpreter running, and it has its own local output buffer, so the * global buffer is just set to be one byte long as it is not used and should not * take up unnecessary RAM. */ #define configCOMMAND_INT_MAX_OUTPUT_SIZE 1 #endif /* FREERTOS_CONFIG_H */