/* FreeRTOS Kernel V10.2.0 Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. http://aws.amazon.com/freertos http://www.FreeRTOS.org */ /* * Copyright (C) 2011-2019, Marvell International Ltd. * All Rights Reserved. */ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H /* Unity includes for testing. */ #include "unity_internals.h" /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. * * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ #define configUSE_PREEMPTION 1 #define configUSE_IDLE_HOOK 0 #define configUSE_TICK_HOOK 0 /* #define configCPU_CLOCK_HZ ( ( unsigned long ) 200000000 ) */ #define configCPU_CLOCK_HZ ( board_cpu_freq( ) ) #define configTICK_RATE_HZ ( ( portTickType ) 1000 ) #define configMAX_PRIORITIES ( 7 ) #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 256 ) /* #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 72 * 1024 ) ) */ #define configMAX_TASK_NAME_LEN ( 16 ) #define configUSE_TRACE_FACILITY 1 #define configUSE_STATS_FORMATTING_FUNCTIONS 1 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 #define configUSE_MUTEXES 1 #if ( CONFIG_ENABLE_STACK_OVERFLOW_CHECK == 1 ) #define configCHECK_FOR_STACK_OVERFLOW 2 #else #define configCHECK_FOR_STACK_OVERFLOW 0 #endif #define configUSE_MALLOC_FAILED_HOOK 0 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 /* Currently the TCP/IP stack is using dynamic allocation, and the MQTT task is * * using static allocation. */ #define configSUPPORT_DYNAMIC_ALLOCATION 1 #define configSUPPORT_STATIC_ALLOCATION 1 /* Assert call defined for debug builds. */ void vAssertCalled( const char * pcFile, uint32_t ulLine ); /* Board CPU frequency */ int board_cpu_freq(); #define configAPPLICATION_ALLOCATED_HEAP 1 #define configASSERT( x ) if( ( x ) == 0 ) TEST_ABORT() /* Enable this if run time statistics are to be enabled. The support functions are already added in WMSDK */ #if ( CONFIG_ENABLE_RUNTIME_STATS == 1 ) #define configGENERATE_RUN_TIME_STATS 1 #else #define configGENERATE_RUN_TIME_STATS 0 #endif #if ( configGENERATE_RUN_TIME_STATS == 1 ) /* wmsdk: Prototype of function defined in wmsdk */ void portWMSDK_CONFIGURE_TIMER_FOR_RUN_TIME_STATS(void); unsigned long portWMSDK_GET_RUN_TIME_COUNTER_VALUE(void); #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS \ portWMSDK_CONFIGURE_TIMER_FOR_RUN_TIME_STATS #define portGET_RUN_TIME_COUNTER_VALUE \ portWMSDK_GET_RUN_TIME_COUNTER_VALUE #endif /* configGENERATE_RUN_TIME_STATS */ #define configUSE_CO_ROUTINES 0 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) /* Use application defined heap region */ #define configAPPLICATION_ALLOCATED_HEAP 1 /* Software timer definitions. */ #define configUSE_TIMERS 1 #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) #define configTIMER_QUEUE_LENGTH 5 #define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE ) /* Set the following definitions to 1 to include the API function, or zero to exclude the API function. */ #define INCLUDE_vTaskPrioritySet 1 #define INCLUDE_uxTaskPriorityGet 1 #define INCLUDE_vTaskDelete 1 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_uxTaskGetStackHighWaterMark 1 #define INCLUDE_pcTaskGetTaskName 1 #define configKERNEL_INTERRUPT_PRIORITY 0xf0 #define configMAX_SYSCALL_INTERRUPT_PRIORITY 0xa0 /* equivalent to 0xa0, or priority 5. */ #define xPortPendSVHandler PendSV_IRQHandler #define xPortSysTickHandler SysTick_IRQHandler #define vPortSVCHandler SVC_IRQHandler /* This demo creates a virtual network connection by accessing the raw Ethernet * or WiFi data to and from a real network connection. Many computers have more * than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell * the demo which real port should be used to create the virtual port. The ports * available are displayed on the console when the application is executed. For * example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4 * results in the wired network being used, while setting * configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being * used. */ #define configNETWORK_INTERFACE_TO_USE 2L /* The address of an echo server that will be used by the two demo echo client * tasks: * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html, * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html. */ #define configECHO_SERVER_ADDR0 192 #define configECHO_SERVER_ADDR1 168 #define configECHO_SERVER_ADDR2 1 #define configECHO_SERVER_ADDR3 4 #define configTCP_ECHO_CLIENT_PORT 7 /* Default MAC address configuration. The demo creates a virtual network * connection that uses this MAC address by accessing the raw Ethernet/WiFi data * to and from a real network connection on the host PC. See the * configNETWORK_INTERFACE_TO_USE definition above for information on how to * configure the real network connection to use. */ #define configMAC_ADDR0 0x00 #define configMAC_ADDR1 0x00 #define configMAC_ADDR2 0x00 #define configMAC_ADDR3 0x00 #define configMAC_ADDR4 0x00 #define configMAC_ADDR5 0x00 /* Default IP address configuration. Used in ipconfigUSE_DHCP is set to 0, or * ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ #define configIP_ADDR0 0 #define configIP_ADDR1 0 #define configIP_ADDR2 0 #define configIP_ADDR3 0 /* Default gateway IP address configuration. Used in ipconfigUSE_DHCP is set to * 0, or ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ #define configGATEWAY_ADDR0 0 #define configGATEWAY_ADDR1 0 #define configGATEWAY_ADDR2 0 #define configGATEWAY_ADDR3 0 /* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and * 208.67.220.220. Used in ipconfigUSE_DHCP is set to 0, or ipconfigUSE_DHCP is * set to 1 but a DNS server cannot be contacted.*/ #define configDNS_SERVER_ADDR0 0 #define configDNS_SERVER_ADDR1 0 #define configDNS_SERVER_ADDR2 0 #define configDNS_SERVER_ADDR3 0 /* Default netmask configuration. Used in ipconfigUSE_DHCP is set to 0, or * ipconfigUSE_DHCP is set to 1 but a DNS server cannot be contacted. */ #define configNET_MASK0 255 #define configNET_MASK1 255 #define configNET_MASK2 255 #define configNET_MASK3 0 /* The UDP port to which print messages are sent. */ #define configPRINT_PORT ( 15000 ) #define configPROFILING ( 0 ) /* Pseudo random number generater used by some demo tasks. */ extern uint32_t ulRand(); #define configRAND32() ulRand() /* FIX ME: The platform FreeRTOS is running on. */ #define configPLATFORM_NAME "MW320" /* Header required for the tracealyzer recorder library. */ /* #include "trcRecorder.h" */ /* Enable following macro to enable logging. It is recommended to keep logging enabled always, * may cause issue in testing if disabled */ #define ENABLE_LOGGING #ifdef ENABLE_LOGGING /* The function that implements FreeRTOS printf style output, and the macro * that maps the configPRINTF() macros to that function. */ extern void vLoggingPrintf( const char * pcFormat, ... ); #define configPRINTF( X ) vLoggingPrintf X /* Non-format version thread-safe print */ extern void vLoggingPrint( const char * pcMessage ); #define configPRINT( X ) vLoggingPrint( X ) #else #define configPRINTF( X ) #define configPRINT( X ) #endif /* Map the logging task's printf to the board specific output function. */ #include void wm_printf(const char *format, ...); #define configPRINT_STRING( X ) wm_printf( X ); /* Sets the length of the buffers into which logging messages are written - so * also defines the maximum length of each log message. */ #define configLOGGING_MAX_MESSAGE_LENGTH 100 /* Set to 1 to prepend each log message with a message number, the task name, * and a time stamp. */ #define configLOGGING_INCLUDE_TIME_AND_TASK_NAME 1 /* The size of the output buffer is set to maximum length required by the tests, * which is the length enough to accomodate largest error string written to * console from CLI. */ #define configCOMMAND_INT_MAX_OUTPUT_SIZE 120 #endif /* FREERTOS_CONFIG_H */