/* Copyright Statement:
 *
 * (C) 2005-2016  MediaTek Inc. All rights reserved.
 *
 * This software/firmware and related documentation ("MediaTek Software") are
 * protected under relevant copyright laws. The information contained herein
 * is confidential and proprietary to MediaTek Inc. ("MediaTek") and/or its licensors.
 * Without the prior written permission of MediaTek and/or its licensors,
 * any reproduction, modification, use or disclosure of MediaTek Software,
 * and information contained herein, in whole or in part, shall be strictly prohibited.
 * You may only use, reproduce, modify, or distribute (as applicable) MediaTek Software
 * if you have agreed to and been bound by the applicable license agreement with
 * MediaTek ("License Agreement") and been granted explicit permission to do so within
 * the License Agreement ("Permitted User").  If you are not a Permitted User,
 * please cease any access or use of MediaTek Software immediately.
 * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
 * THAT MEDIATEK SOFTWARE RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES
 * ARE PROVIDED TO RECEIVER ON AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL
 * WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
 * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
 * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
 * SUPPLIED WITH MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
 * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
 * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
 * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
 * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
 * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
 * CUMULATIVE LIABILITY WITH RESPECT TO MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
 * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE MEDIATEK SOFTWARE AT ISSUE,
 * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
 * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
 */

/****************************************************************************
    Module Name:
    Pinmux

    Abstract:
    Configure pinmux settings.

    Revision History:
    Who         When            What
    --------    ----------      ------------------------------------------
***************************************************************************/

#include "hal_gpio.h"
#ifdef HAL_GPIO_MODULE_ENABLED

#include "type_def.h"
#include "hal_pinmux.h"
#include "pinmux.h"

int32_t pinmux_config(ENUM_IOT_GPIO_NAME_T gpio_index, uint32_t function)
{
    ENUM_PAD_NAME_T ePadIndex;

    // TODO: check if selected function belonging to gpio_index

    switch (gpio_index) {
        case eIOT_GPIO_IDX_0:

            ePadIndex = ePAD_ANTSEL0;

            break;
        case eIOT_GPIO_IDX_1:

            ePadIndex = ePAD_ANTSEL1;

            break;
        case eIOT_GPIO_IDX_2:

            ePadIndex = ePAD_ANTSEL2;

            break;
        case eIOT_GPIO_IDX_3:

            ePadIndex = ePAD_ANTSEL3;

            break;
        case eIOT_GPIO_IDX_4:

            ePadIndex = ePAD_ANTSEL4;

            break;
        case eIOT_GPIO_IDX_5:

            ePadIndex = ePAD_ANTSEL5;

            break;
        case eIOT_GPIO_IDX_6:

            ePadIndex = ePAD_ANTSEL6;

            break;
        case eIOT_GPIO_IDX_7:

            ePadIndex = ePAD_ANTSEL7;

            break;
        case eIOT_GPIO_IDX_24:

            ePadIndex = ePAD_PERST_N;

            break;
        case eIOT_GPIO_IDX_25:

            ePadIndex = ePAD_WAKE_N;

            break;
        case eIOT_GPIO_IDX_26:

            ePadIndex = ePAD_CLK_REQ_N;

            break;
        case eIOT_GPIO_IDX_27:

            ePadIndex = ePAD_SDIO_CLK;

            break;
        case eIOT_GPIO_IDX_28:

            ePadIndex = ePAD_SDIO_CMD;

            break;
        case eIOT_GPIO_IDX_29:

            ePadIndex = ePAD_SDIO_DAT3;

            break;
        case eIOT_GPIO_IDX_30:

            ePadIndex = ePAD_SDIO_DAT2;

            break;
        case eIOT_GPIO_IDX_31:

            ePadIndex = ePAD_SDIO_DAT1;

            break;
        case eIOT_GPIO_IDX_32:

            ePadIndex = ePAD_SDIO_DAT0;

            break;
        case eIOT_GPIO_IDX_33:

            ePadIndex = ePAD_GPIO0;

            break;
        case eIOT_GPIO_IDX_34:

            ePadIndex = ePAD_GPIO1;

            break;
        case eIOT_GPIO_IDX_35:

            ePadIndex = ePAD_UART_DBG;

            break;
        case eIOT_GPIO_IDX_36:

            ePadIndex = ePAD_UART_RX;

            break;
        case eIOT_GPIO_IDX_37:

            ePadIndex = ePAD_UART_TX;

            break;
        case eIOT_GPIO_IDX_38:

            ePadIndex = ePAD_UART_RTS;

            break;
        case eIOT_GPIO_IDX_39:

            ePadIndex = ePAD_UART_CTS;

            break;
        case eIOT_GPIO_IDX_57:

            ePadIndex = ePAD_WF_RF_DIS_B;

            break;
        case eIOT_GPIO_IDX_58:

            ePadIndex = ePAD_BT_RF_DIS_B;

            break;
        case eIOT_GPIO_IDX_59:

            ePadIndex = ePAD_WF_LED_B;

            break;
        case eIOT_GPIO_IDX_60:

            ePadIndex = ePAD_BT_LED_B;

            break;
        default:
            return -1;
    }

    halPinmuxTopOnPadFunc(ePadIndex, function);

    return 0;
}
#endif