#!/usr/bin/env python

# Amazon FPGA Hardware Development Kit
#
# Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
#
# Licensed under the Amazon Software License (the "License"). You may not use
# this file except in compliance with the License. A copy of the License is
# located at
#
#    http://aws.amazon.com/asl/
#
# or in the "license" file accompanying this file. This file is distributed on
# an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, express or
# implied. See the License for the specific language governing permissions and
# limitations under the License.

from __future__ import print_function
import os
import sys
import platform
import glob
import argparse
import subprocess
import logging
import platform

# DPDK make config target
make_tgt = "x86_64-native-linuxapp-gcc"
try:
    if "aarch64" in platform.processor():
        make_tgt = "arm64-armv8a-linuxapp-gcc"
except AttributeError:
    pass

dpdk_devbind = "./usertools/dpdk-devbind.py"
num_2MB_hugepages = 16384

# Logger
logger = logging.getLogger('logger')

def print_success(scripts_path, install_path):
    print("")
    print("DPDK setup complete!")
    print("pktgen-dpdk may be run via the following steps:")
    print("  cd %s/pktgen-dpdk" % (install_path))
    print("  sudo ./app/%s/pktgen -l 0,1 -n 4 --proc-type auto --log-level 7 --socket-mem 2048 --file-prefix pg -b 00:03.0 -- -T -P -m [1].0 -f %s/pktgen-ena.pkt" % (make_tgt, scripts_path))

def check_output(args, stderr=None):
    return subprocess.Popen(args, stdout=subprocess.PIPE,
                            stderr=stderr).communicate()[0]

def cmd_exec(cmd, check_return=True):
    # Execute the cmd, check the return and exit on failures
    ret = os.system(cmd)
    if check_return == True and ret != 0:
        logger.error("cmd='%s' failed with ret=%d, exiting" % (cmd, ret))
        sys.exit(1)

def load_uio():
    distro = platform.linux_distribution()
    if (distro[0] == "Ubuntu"):
        cmd_exec("modprobe uio")
    else:
        cmd_exec("modprobe uio_pci_generic")

def setup_dpdk(install_path, eni_dbdf, eni_ethdev):
    logger.debug("setup_dpdk: install_path=%s" % (install_path))

    if os.path.exists(install_path) == False:
        logger.error("install_path=%s does not exist." % (install_path))
        logger.error("Please specify a directory that was installed via virtual-ethernet-pktgen-install.py, exiting")
        sys.exit(1)

    if eni_dbdf == "None" or eni_ethdev == "None":
        logger.error("eni_dbdf=%s, eni_ethdev=%s is invalid, exiting" % (eni_dbdf, eni_ethdev))
        sys.exit(1)

    if eni_ethdev == "eth0":
        logger.error("Using eni_ethdev=%s for pktgen will disrupt your primary network interface" % (eni_ethdev))
        logger.error("Please specifiy a different eni_ethdev such as eth1, exiting")
        sys.exit(1)

    # Stash away the current working directory
    cwd = os.getcwd()
    scripts_path = os.path.dirname(os.path.abspath(sys.argv[0]))
    logger.debug("scripts directory path is %s" % (scripts_path))

    # cd to the install_path/dpdk directory
    os.chdir("%s/dpdk" % (install_path))

    if os.path.exists(dpdk_devbind) == False:
        logger.error("dpdk_devbind=%s does not exist." % (dpdk_devbind))
        logger.error("Please specify a directory that was installed via virtual-ethernet-pktgen-install.py, exiting")
        sys.exit(1)

    # Mount '/mnt/huge', if needed
    if os.path.exists("/mnt/huge") == False:
        cmd_exec("mkdir /mnt/huge")

    cmd_exec("mount -t hugetlbfs nodev /mnt/huge")

    # Configure hugepages
    cmd_exec("echo %d > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages" % (num_2MB_hugepages))

    # Load distro-specific uio
    load_uio()

    # Remove then load igb_uio.ko
    cmd_exec("rmmod ./build/kernel/linux/igb_uio/igb_uio.ko >/dev/null 2>&1", False)
    cmd_exec("insmod ./build/kernel/linux/igb_uio/igb_uio.ko")

    # Bind the ENI device to to DPDK
    cmd_exec("ifdown %s" % (eni_ethdev))
    cmd_exec("%s --bind=igb_uio %s" % (dpdk_devbind, eni_dbdf))

    # cd back to the original directory
    os.chdir("%s" % (cwd))

    # Print a success message
    print_success(scripts_path, install_path)

def main():
    parser = argparse.ArgumentParser(
        description="Sets up DPDK for pktgen-dpdk use.")
    parser.add_argument('install_path', metavar='INSTALL_DIR', type=str,
        help = "specify the full installation directory path that was used as an argument to virtual-ethernet-pktgen-install.py")
    parser.add_argument('--eni_dbdf', metavar='ENI_DBDF', type=str, default="None",
        help = "specify the ENI DBDF. e.g. see 'lspci' output '0000:00:04.0' for Ethernet controller device 1d0f:ec20")
    parser.add_argument('--eni_ethdev', metavar='ENI_ETHDEV', type=str, default="None",
        help = "specify the ENI Ethernet device. e.g. see 'ifconfig' output and the 'eth1' device")
    parser.add_argument('--debug', action='store_true', required=False,
        help='Enable debug messages')
    args = parser.parse_args()

    logging_level = logging.INFO
    if args.debug:
        logging_level = logging.DEBUG

    logging_format = '%(levelname)s:%(asctime)s: %(message)s'

    logger.setLevel(logging_level)

    fh = logging.StreamHandler()

    fh.setLevel(logging_level)
    formatter = logging.Formatter(logging_format)
    fh.setFormatter(formatter)
    logger.addHandler(fh)

    setup_dpdk(args.install_path, args.eni_dbdf, args.eni_ethdev)

if __name__ == '__main__':
    main()