/*
 * AWS IoT Device Embedded C SDK for ZephyrRTOS
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */

#ifndef DEMO_CONFIG_H
#define DEMO_CONFIG_H

/**************************************************/
/******* DO NOT CHANGE the following order ********/
/**************************************************/

/* Include logging header files and define logging macros in the following order:
 * 1. Include the header file "logging_levels.h".
 * 2. Define the LIBRARY_LOG_NAME and LIBRARY_LOG_LEVEL macros depending on
 * the logging configuration for DEMO.
 * 3. Include the header file "logging_stack.h", if logging is enabled for DEMO.
 */

#include "logging_levels.h"

/* Logging configuration for the Demo. */
#ifndef LIBRARY_LOG_NAME
    #define LIBRARY_LOG_NAME    "DEMO"
#endif

#ifndef LIBRARY_LOG_LEVEL
    #define LIBRARY_LOG_LEVEL    LOG_INFO
#endif
#include "logging_stack.h"

/************ End of logging configuration ****************/

/**
 * @brief MQTT server host name.
 *
 * This demo can be run using the open-source Mosquitto broker tool.
 * A Mosquitto MQTT broker can be setup locally for running this demo against
 * it. Please refer to the instructions in https://mosquitto.org/ for running
 * a Mosquitto broker locally.
 * Alternatively, instructions to run a Mosquitto broker on a Docker container
 * can be viewed in the README.md of the root directory.
 *
 * #define BROKER_ENDPOINT               "...insert here..."
 */

/**
 * @brief MQTT server port number.
 *
 * In general, port 8883 is for secured MQTT connections.
 */
#define BROKER_PORT    ( 8883 )

/**
 * @brief Server's root CA certificate.
 *
 * For AWS IoT MQTT broker, this certificate is used to identify the AWS IoT
 * server and is publicly available. Refer to the AWS documentation available
 * in the link below.
 * https://docs.aws.amazon.com/iot/latest/developerguide/server-authentication.html#server-authentication-certs
 *
 * The preset default value is of AmazonRootCA1.pem, which can be found in the link below.
 * https://www.amazontrust.com/repository/AmazonRootCA1.pem
 * 
 * @note This certificate should be PEM-encoded.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN CERTIFICATE-----\n"\
 * "...base64 data...\n"\
 * "-----END CERTIFICATE-----"
 *
 * #define ROOT_CA_CERT_PEM    "...insert here..."
 */
#ifndef ROOT_CA_CERT_PEM
    #define ROOT_CA_CERT_PEM    "-----BEGIN CERTIFICATE-----\n"\
                                "MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF\n"\
                                "ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6\n"\
                                "b24gUm9vdCBDQSAxMB4XDTE1MDUyNjAwMDAwMFoXDTM4MDExNzAwMDAwMFowOTEL\n"\
                                "MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv\n"\
                                "b3QgQ0EgMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALJ4gHHKeNXj\n"\
                                "ca9HgFB0fW7Y14h29Jlo91ghYPl0hAEvrAIthtOgQ3pOsqTQNroBvo3bSMgHFzZM\n"\
                                "9O6II8c+6zf1tRn4SWiw3te5djgdYZ6k/oI2peVKVuRF4fn9tBb6dNqcmzU5L/qw\n"\
                                "IFAGbHrQgLKm+a/sRxmPUDgH3KKHOVj4utWp+UhnMJbulHheb4mjUcAwhmahRWa6\n"\
                                "VOujw5H5SNz/0egwLX0tdHA114gk957EWW67c4cX8jJGKLhD+rcdqsq08p8kDi1L\n"\
                                "93FcXmn/6pUCyziKrlA4b9v7LWIbxcceVOF34GfID5yHI9Y/QCB/IIDEgEw+OyQm\n"\
                                "jgSubJrIqg0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC\n"\
                                "AYYwHQYDVR0OBBYEFIQYzIU07LwMlJQuCFmcx7IQTgoIMA0GCSqGSIb3DQEBCwUA\n"\
                                "A4IBAQCY8jdaQZChGsV2USggNiMOruYou6r4lK5IpDB/G/wkjUu0yKGX9rbxenDI\n"\
                                "U5PMCCjjmCXPI6T53iHTfIUJrU6adTrCC2qJeHZERxhlbI1Bjjt/msv0tadQ1wUs\n"\
                                "N+gDS63pYaACbvXy8MWy7Vu33PqUXHeeE6V/Uq2V8viTO96LXFvKWlJbYK8U90vv\n"\
                                "o/ufQJVtMVT8QtPHRh8jrdkPSHCa2XV4cdFyQzR1bldZwgJcJmApzyMZFo6IQ6XU\n"\
                                "5MsI+yMRQ+hDKXJioaldXgjUkK642M4UwtBV8ob2xJNDd2ZhwLnoQdeXeGADbkpy\n"\
                                "rqXRfboQnoZsG4q5WTP468SQvvG5\n"\
                                "-----END CERTIFICATE-----"
#endif

/**
 * @brief MQTT client identifier.
 *
 * No two clients may use the same client identifier simultaneously.
 */
#ifndef CLIENT_IDENTIFIER
    #define CLIENT_IDENTIFIER    "testclient"
#endif

/**
 * @brief The name of the Wi-Fi network to join.
 *
 * #define WIFI_NETWORK_SSID        "...insert here..."
 */

/**
 * @brief Password needed to join Wi-Fi network. If you are using WPA, set this
 * to your network password. If there is no password, use the empty string "".
 *
 * #define WIFI_NETWORK_PASSWORD    "...insert here...."
 */

#endif /* ifndef DEMO_CONFIG_H */