// Code generated by smithy-go-codegen DO NOT EDIT.

package types

import (
	smithydocument "github.com/aws/smithy-go/document"
	"time"
)

// An object representing a container instance or task attachment.
type Attachment struct {

	// Details of the attachment. For elastic network interfaces, this includes the
	// network interface ID, the MAC address, the subnet ID, and the private IPv4
	// address.
	Details []KeyValuePair

	// The unique identifier for the attachment.
	Id *string

	// The status of the attachment. Valid values are PRECREATED , CREATED , ATTACHING
	// , ATTACHED , DETACHING , DETACHED , DELETED , and FAILED .
	Status *string

	// The type of the attachment, such as ElasticNetworkInterface .
	Type *string

	noSmithyDocumentSerde
}

// An object representing a change in state for a task attachment.
type AttachmentStateChange struct {

	// The Amazon Resource Name (ARN) of the attachment.
	//
	// This member is required.
	AttachmentArn *string

	// The status of the attachment.
	//
	// This member is required.
	Status *string

	noSmithyDocumentSerde
}

// An attribute is a name-value pair that's associated with an Amazon ECS object.
// Use attributes to extend the Amazon ECS data model by adding custom metadata to
// your resources. For more information, see Attributes (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html#attributes)
// in the Amazon Elastic Container Service Developer Guide.
type Attribute struct {

	// The name of the attribute. The name must contain between 1 and 128 characters.
	// The name may contain letters (uppercase and lowercase), numbers, hyphens (-),
	// underscores (_), forward slashes (/), back slashes (\), or periods (.).
	//
	// This member is required.
	Name *string

	// The ID of the target. You can specify the short form ID for a resource or the
	// full Amazon Resource Name (ARN).
	TargetId *string

	// The type of the target to attach the attribute with. This parameter is required
	// if you use the short form ID for a resource instead of the full ARN.
	TargetType TargetType

	// The value of the attribute. The value must contain between 1 and 128
	// characters. It can contain letters (uppercase and lowercase), numbers, hyphens
	// (-), underscores (_), periods (.), at signs (@), forward slashes (/), back
	// slashes (\), colons (:), or spaces. The value can't start or end with a space.
	Value *string

	noSmithyDocumentSerde
}

// The details of the Auto Scaling group for the capacity provider.
type AutoScalingGroupProvider struct {

	// The Amazon Resource Name (ARN) that identifies the Auto Scaling group.
	//
	// This member is required.
	AutoScalingGroupArn *string

	// The managed scaling settings for the Auto Scaling group capacity provider.
	ManagedScaling *ManagedScaling

	// The managed termination protection setting to use for the Auto Scaling group
	// capacity provider. This determines whether the Auto Scaling group has managed
	// termination protection. The default is off. When using managed termination
	// protection, managed scaling must also be used otherwise managed termination
	// protection doesn't work. When managed termination protection is on, Amazon ECS
	// prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks
	// from being terminated during a scale-in action. The Auto Scaling group and each
	// instance in the Auto Scaling group must have instance protection from scale-in
	// actions on as well. For more information, see Instance Protection (https://docs.aws.amazon.com/autoscaling/ec2/userguide/as-instance-termination.html#instance-protection)
	// in the Auto Scaling User Guide. When managed termination protection is off, your
	// Amazon EC2 instances aren't protected from termination when the Auto Scaling
	// group scales in.
	ManagedTerminationProtection ManagedTerminationProtection

	noSmithyDocumentSerde
}

// The details of the Auto Scaling group capacity provider to update.
type AutoScalingGroupProviderUpdate struct {

	// The managed scaling settings for the Auto Scaling group capacity provider.
	ManagedScaling *ManagedScaling

	// The managed termination protection setting to use for the Auto Scaling group
	// capacity provider. This determines whether the Auto Scaling group has managed
	// termination protection. When using managed termination protection, managed
	// scaling must also be used otherwise managed termination protection doesn't work.
	// When managed termination protection is on, Amazon ECS prevents the Amazon EC2
	// instances in an Auto Scaling group that contain tasks from being terminated
	// during a scale-in action. The Auto Scaling group and each instance in the Auto
	// Scaling group must have instance protection from scale-in actions on. For more
	// information, see Instance Protection (https://docs.aws.amazon.com/autoscaling/ec2/userguide/as-instance-termination.html#instance-protection)
	// in the Auto Scaling User Guide. When managed termination protection is off, your
	// Amazon EC2 instances aren't protected from termination when the Auto Scaling
	// group scales in.
	ManagedTerminationProtection ManagedTerminationProtection

	noSmithyDocumentSerde
}

// An object representing the networking details for a task or service.
type AwsVpcConfiguration struct {

	// The IDs of the subnets associated with the task or service. There's a limit of
	// 16 subnets that can be specified per AwsVpcConfiguration . All specified subnets
	// must be from the same VPC.
	//
	// This member is required.
	Subnets []string

	// Whether the task's elastic network interface receives a public IP address. The
	// default value is DISABLED .
	AssignPublicIp AssignPublicIp

	// The IDs of the security groups associated with the task or service. If you
	// don't specify a security group, the default security group for the VPC is used.
	// There's a limit of 5 security groups that can be specified per
	// AwsVpcConfiguration . All specified security groups must be from the same VPC.
	SecurityGroups []string

	noSmithyDocumentSerde
}

// The details for a capacity provider.
type CapacityProvider struct {

	// The Auto Scaling group settings for the capacity provider.
	AutoScalingGroupProvider *AutoScalingGroupProvider

	// The Amazon Resource Name (ARN) that identifies the capacity provider.
	CapacityProviderArn *string

	// The name of the capacity provider.
	Name *string

	// The current status of the capacity provider. Only capacity providers in an
	// ACTIVE state can be used in a cluster. When a capacity provider is successfully
	// deleted, it has an INACTIVE status.
	Status CapacityProviderStatus

	// The metadata that you apply to the capacity provider to help you categorize and
	// organize it. Each tag consists of a key and an optional value. You define both.
	// The following basic restrictions apply to tags:
	//   - Maximum number of tags per resource - 50
	//   - For each resource, each tag key must be unique, and each tag key can have
	//   only one value.
	//   - Maximum key length - 128 Unicode characters in UTF-8
	//   - Maximum value length - 256 Unicode characters in UTF-8
	//   - If your tagging schema is used across multiple services and resources,
	//   remember that other services may have restrictions on allowed characters.
	//   Generally allowed characters are: letters, numbers, and spaces representable in
	//   UTF-8, and the following characters: + - = . _ : / @.
	//   - Tag keys and values are case-sensitive.
	//   - Do not use aws: , AWS: , or any upper or lowercase combination of such as a
	//   prefix for either keys or values as it is reserved for Amazon Web Services use.
	//   You cannot edit or delete tag keys or values with this prefix. Tags with this
	//   prefix do not count against your tags per resource limit.
	Tags []Tag

	// The update status of the capacity provider. The following are the possible
	// states that is returned. DELETE_IN_PROGRESS The capacity provider is in the
	// process of being deleted. DELETE_COMPLETE The capacity provider was successfully
	// deleted and has an INACTIVE status. DELETE_FAILED The capacity provider can't
	// be deleted. The update status reason provides further details about why the
	// delete failed.
	UpdateStatus CapacityProviderUpdateStatus

	// The update status reason. This provides further details about the update status
	// for the capacity provider.
	UpdateStatusReason *string

	noSmithyDocumentSerde
}

// The details of a capacity provider strategy. A capacity provider strategy can
// be set when using the RunTask or CreateCluster APIs or as the default capacity
// provider strategy for a cluster with the CreateCluster API. Only capacity
// providers that are already associated with a cluster and have an ACTIVE or
// UPDATING status can be used in a capacity provider strategy. The
// PutClusterCapacityProviders API is used to associate a capacity provider with a
// cluster. If specifying a capacity provider that uses an Auto Scaling group, the
// capacity provider must already be created. New Auto Scaling group capacity
// providers can be created with the CreateCapacityProvider API operation. To use
// a Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT
// capacity providers. The Fargate capacity providers are available to all accounts
// and only need to be associated with a cluster to be used in a capacity provider
// strategy. A capacity provider strategy may contain a maximum of 6 capacity
// providers.
type CapacityProviderStrategyItem struct {

	// The short name of the capacity provider.
	//
	// This member is required.
	CapacityProvider *string

	// The base value designates how many tasks, at a minimum, to run on the specified
	// capacity provider. Only one capacity provider in a capacity provider strategy
	// can have a base defined. If no value is specified, the default value of 0 is
	// used.
	Base int32

	// The weight value designates the relative percentage of the total number of
	// tasks launched that should use the specified capacity provider. The weight
	// value is taken into consideration after the base value, if defined, is
	// satisfied. If no weight value is specified, the default value of 0 is used.
	// When multiple capacity providers are specified within a capacity provider
	// strategy, at least one of the capacity providers must have a weight value
	// greater than zero and any capacity providers with a weight of 0 can't be used
	// to place tasks. If you specify multiple capacity providers in a strategy that
	// all have a weight of 0 , any RunTask or CreateService actions using the
	// capacity provider strategy will fail. An example scenario for using weights is
	// defining a strategy that contains two capacity providers and both have a weight
	// of 1 , then when the base is satisfied, the tasks will be split evenly across
	// the two capacity providers. Using that same logic, if you specify a weight of 1
	// for capacityProviderA and a weight of 4 for capacityProviderB, then for every
	// one task that's run using capacityProviderA, four tasks would use
	// capacityProviderB.
	Weight int32

	noSmithyDocumentSerde
}

// A regional grouping of one or more container instances where you can run task
// requests. Each account receives a default cluster the first time you use the
// Amazon ECS service, but you may also create other clusters. Clusters may contain
// more than one instance type simultaneously.
type Cluster struct {

	// The number of services that are running on the cluster in an ACTIVE state. You
	// can view these services with ListServices .
	ActiveServicesCount int32

	// The resources attached to a cluster. When using a capacity provider with a
	// cluster, the capacity provider and associated resources are returned as cluster
	// attachments.
	Attachments []Attachment

	// The status of the capacity providers associated with the cluster. The following
	// are the states that are returned. UPDATE_IN_PROGRESS The available capacity
	// providers for the cluster are updating. UPDATE_COMPLETE The capacity providers
	// have successfully updated. UPDATE_FAILED The capacity provider updates failed.
	AttachmentsStatus *string

	// The capacity providers associated with the cluster.
	CapacityProviders []string

	// The Amazon Resource Name (ARN) that identifies the cluster. For more
	// information about the ARN format, see Amazon Resource Name (ARN) (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#ecs-resource-ids)
	// in the Amazon ECS Developer Guide.
	ClusterArn *string

	// A user-generated string that you use to identify your cluster.
	ClusterName *string

	// The execute command configuration for the cluster.
	Configuration *ClusterConfiguration

	// The default capacity provider strategy for the cluster. When services or tasks
	// are run in the cluster with no launch type or capacity provider strategy
	// specified, the default capacity provider strategy is used.
	DefaultCapacityProviderStrategy []CapacityProviderStrategyItem

	// The number of tasks in the cluster that are in the PENDING state.
	PendingTasksCount int32

	// The number of container instances registered into the cluster. This includes
	// container instances in both ACTIVE and DRAINING status.
	RegisteredContainerInstancesCount int32

	// The number of tasks in the cluster that are in the RUNNING state.
	RunningTasksCount int32

	// Use this parameter to set a default Service Connect namespace. After you set a
	// default Service Connect namespace, any new services with Service Connect turned
	// on that are created in the cluster are added as client services in the
	// namespace. This setting only applies to new services that set the enabled
	// parameter to true in the ServiceConnectConfiguration . You can set the namespace
	// of each service individually in the ServiceConnectConfiguration to override
	// this default parameter. Tasks that run in a namespace can use short names to
	// connect to services in the namespace. Tasks can connect to services across all
	// of the clusters in the namespace. Tasks connect through a managed proxy
	// container that collects logs and metrics for increased visibility. Only the
	// tasks that Amazon ECS services create are supported with Service Connect. For
	// more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
	// in the Amazon Elastic Container Service Developer Guide.
	ServiceConnectDefaults *ClusterServiceConnectDefaults

	// The settings for the cluster. This parameter indicates whether CloudWatch
	// Container Insights is on or off for a cluster.
	Settings []ClusterSetting

	// Additional information about your clusters that are separated by launch type.
	// They include the following:
	//   - runningEC2TasksCount
	//   - RunningFargateTasksCount
	//   - pendingEC2TasksCount
	//   - pendingFargateTasksCount
	//   - activeEC2ServiceCount
	//   - activeFargateServiceCount
	//   - drainingEC2ServiceCount
	//   - drainingFargateServiceCount
	Statistics []KeyValuePair

	// The status of the cluster. The following are the possible states that are
	// returned. ACTIVE The cluster is ready to accept tasks and if applicable you can
	// register container instances with the cluster. PROVISIONING The cluster has
	// capacity providers that are associated with it and the resources needed for the
	// capacity provider are being created. DEPROVISIONING The cluster has capacity
	// providers that are associated with it and the resources needed for the capacity
	// provider are being deleted. FAILED The cluster has capacity providers that are
	// associated with it and the resources needed for the capacity provider have
	// failed to create. INACTIVE The cluster has been deleted. Clusters with an
	// INACTIVE status may remain discoverable in your account for a period of time.
	// However, this behavior is subject to change in the future. We don't recommend
	// that you rely on INACTIVE clusters persisting.
	Status *string

	// The metadata that you apply to the cluster to help you categorize and organize
	// them. Each tag consists of a key and an optional value. You define both. The
	// following basic restrictions apply to tags:
	//   - Maximum number of tags per resource - 50
	//   - For each resource, each tag key must be unique, and each tag key can have
	//   only one value.
	//   - Maximum key length - 128 Unicode characters in UTF-8
	//   - Maximum value length - 256 Unicode characters in UTF-8
	//   - If your tagging schema is used across multiple services and resources,
	//   remember that other services may have restrictions on allowed characters.
	//   Generally allowed characters are: letters, numbers, and spaces representable in
	//   UTF-8, and the following characters: + - = . _ : / @.
	//   - Tag keys and values are case-sensitive.
	//   - Do not use aws: , AWS: , or any upper or lowercase combination of such as a
	//   prefix for either keys or values as it is reserved for Amazon Web Services use.
	//   You cannot edit or delete tag keys or values with this prefix. Tags with this
	//   prefix do not count against your tags per resource limit.
	Tags []Tag

	noSmithyDocumentSerde
}

// The execute command configuration for the cluster.
type ClusterConfiguration struct {

	// The details of the execute command configuration.
	ExecuteCommandConfiguration *ExecuteCommandConfiguration

	noSmithyDocumentSerde
}

// Use this parameter to set a default Service Connect namespace. After you set a
// default Service Connect namespace, any new services with Service Connect turned
// on that are created in the cluster are added as client services in the
// namespace. This setting only applies to new services that set the enabled
// parameter to true in the ServiceConnectConfiguration . You can set the namespace
// of each service individually in the ServiceConnectConfiguration to override
// this default parameter. Tasks that run in a namespace can use short names to
// connect to services in the namespace. Tasks can connect to services across all
// of the clusters in the namespace. Tasks connect through a managed proxy
// container that collects logs and metrics for increased visibility. Only the
// tasks that Amazon ECS services create are supported with Service Connect. For
// more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
// in the Amazon Elastic Container Service Developer Guide.
type ClusterServiceConnectDefaults struct {

	// The namespace name or full Amazon Resource Name (ARN) of the Cloud Map
	// namespace. When you create a service and don't specify a Service Connect
	// configuration, this namespace is used.
	Namespace *string

	noSmithyDocumentSerde
}

// Use this parameter to set a default Service Connect namespace. After you set a
// default Service Connect namespace, any new services with Service Connect turned
// on that are created in the cluster are added as client services in the
// namespace. This setting only applies to new services that set the enabled
// parameter to true in the ServiceConnectConfiguration . You can set the namespace
// of each service individually in the ServiceConnectConfiguration to override
// this default parameter. Tasks that run in a namespace can use short names to
// connect to services in the namespace. Tasks can connect to services across all
// of the clusters in the namespace. Tasks connect through a managed proxy
// container that collects logs and metrics for increased visibility. Only the
// tasks that Amazon ECS services create are supported with Service Connect. For
// more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
// in the Amazon Elastic Container Service Developer Guide.
type ClusterServiceConnectDefaultsRequest struct {

	// The namespace name or full Amazon Resource Name (ARN) of the Cloud Map
	// namespace that's used when you create a service and don't specify a Service
	// Connect configuration. The namespace name can include up to 1024 characters. The
	// name is case-sensitive. The name can't include hyphens (-), tilde (~), greater
	// than (>), less than (<), or slash (/). If you enter an existing namespace name
	// or ARN, then that namespace will be used. Any namespace type is supported. The
	// namespace must be in this account and this Amazon Web Services Region. If you
	// enter a new name, a Cloud Map namespace will be created. Amazon ECS creates a
	// Cloud Map namespace with the "API calls" method of instance discovery only. This
	// instance discovery method is the "HTTP" namespace type in the Command Line
	// Interface. Other types of instance discovery aren't used by Service Connect. If
	// you update the service with an empty string "" for the namespace name, the
	// cluster configuration for Service Connect is removed. Note that the namespace
	// will remain in Cloud Map and must be deleted separately. For more information
	// about Cloud Map, see Working with Services (https://docs.aws.amazon.com/cloud-map/latest/dg/working-with-services.html)
	// in the Cloud Map Developer Guide.
	//
	// This member is required.
	Namespace *string

	noSmithyDocumentSerde
}

// The settings to use when creating a cluster. This parameter is used to turn on
// CloudWatch Container Insights for a cluster.
type ClusterSetting struct {

	// The name of the cluster setting. The value is containerInsights .
	Name ClusterSettingName

	// The value to set for the cluster setting. The supported values are enabled and
	// disabled . If you set name to containerInsights and value to enabled ,
	// CloudWatch Container Insights will be on for the cluster, otherwise it will be
	// off unless the containerInsights account setting is turned on. If a cluster
	// value is specified, it will override the containerInsights value set with
	// PutAccountSetting (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_PutAccountSetting.html)
	// or PutAccountSettingDefault (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_PutAccountSettingDefault.html)
	// .
	Value *string

	noSmithyDocumentSerde
}

// A Docker container that's part of a task.
type Container struct {

	// The Amazon Resource Name (ARN) of the container.
	ContainerArn *string

	// The number of CPU units set for the container. The value is 0 if no value was
	// specified in the container definition when the task definition was registered.
	Cpu *string

	// The exit code returned from the container.
	ExitCode *int32

	// The IDs of each GPU assigned to the container.
	GpuIds []string

	// The health status of the container. If health checks aren't configured for this
	// container in its task definition, then it reports the health status as UNKNOWN .
	HealthStatus HealthStatus

	// The image used for the container.
	Image *string

	// The container image manifest digest.
	ImageDigest *string

	// The last known status of the container.
	LastStatus *string

	// The details of any Amazon ECS managed agents associated with the container.
	ManagedAgents []ManagedAgent

	// The hard limit (in MiB) of memory set for the container.
	Memory *string

	// The soft limit (in MiB) of memory set for the container.
	MemoryReservation *string

	// The name of the container.
	Name *string

	// The network bindings associated with the container.
	NetworkBindings []NetworkBinding

	// The network interfaces associated with the container.
	NetworkInterfaces []NetworkInterface

	// A short (255 max characters) human-readable string to provide additional
	// details about a running or stopped container.
	Reason *string

	// The ID of the Docker container.
	RuntimeId *string

	// The ARN of the task.
	TaskArn *string

	noSmithyDocumentSerde
}

// Container definitions are used in task definitions to describe the different
// containers that are launched as part of a task.
type ContainerDefinition struct {

	// The command that's passed to the container. This parameter maps to Cmd in the
	// Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the COMMAND parameter to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . For more information, see
	// https://docs.docker.com/engine/reference/builder/#cmd (https://docs.docker.com/engine/reference/builder/#cmd)
	// . If there are multiple arguments, each argument is a separated string in the
	// array.
	Command []string

	// The number of cpu units reserved for the container. This parameter maps to
	// CpuShares in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --cpu-shares option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This field is optional for tasks using the Fargate launch type, and the only
	// requirement is that the total amount of CPU reserved for all containers within a
	// task be lower than the task-level cpu value. You can determine the number of
	// CPU units that are available per EC2 instance type by multiplying the vCPUs
	// listed for that instance type on the Amazon EC2 Instances (http://aws.amazon.com/ec2/instance-types/)
	// detail page by 1,024. Linux containers share unallocated CPU units with other
	// containers on the container instance with the same ratio as their allocated
	// amount. For example, if you run a single-container task on a single-core
	// instance type with 512 CPU units specified for that container, and that's the
	// only task running on the container instance, that container could use the full
	// 1,024 CPU unit share at any given time. However, if you launched another copy of
	// the same task on that container instance, each task is guaranteed a minimum of
	// 512 CPU units when needed. Moreover, each container could float to higher CPU
	// usage if the other container was not using it. If both tasks were 100% active
	// all of the time, they would be limited to 512 CPU units. On Linux container
	// instances, the Docker daemon on the container instance uses the CPU value to
	// calculate the relative CPU share ratios for running containers. For more
	// information, see CPU share constraint (https://docs.docker.com/engine/reference/run/#cpu-share-constraint)
	// in the Docker documentation. The minimum valid CPU share value that the Linux
	// kernel allows is 2. However, the CPU parameter isn't required, and you can use
	// CPU values below 2 in your container definitions. For CPU values below 2
	// (including null), the behavior varies based on your Amazon ECS container agent
	// version:
	//   - Agent versions less than or equal to 1.1.0: Null and zero CPU values are
	//   passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU
	//   values of 1 are passed to Docker as 1, which the Linux kernel converts to two
	//   CPU shares.
	//   - Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values
	//   of 1 are passed to Docker as 2.
	// On Windows container instances, the CPU limit is enforced as an absolute limit,
	// or a quota. Windows containers only have access to the specified amount of CPU
	// that's described in the task definition. A null or zero CPU value is passed to
	// Docker as 0 , which Windows interprets as 1% of one CPU.
	Cpu int32

	// A list of ARNs in SSM or Amazon S3 to a credential spec ( credspec code>) file
	// that configures a container for Active Directory authentication. This parameter
	// is only used with domainless authentication. The format for each ARN is
	// credentialspecdomainless:MyARN . Replace MyARN with the ARN in SSM or Amazon
	// S3. The credspec must provide a ARN in Secrets Manager for a secret containing
	// the username, password, and the domain to connect to. For better security, the
	// instance isn't joined to the domain for domainless authentication. Other
	// applications on the instance can't use the domainless credentials. You can use
	// this parameter to run tasks on the same instance, even it the tasks need to join
	// different domains. For more information, see Using gMSAs for Windows Containers (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/windows-gmsa.html)
	// and Using gMSAs for Linux Containers (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/linux-gmsa.html)
	// .
	CredentialSpecs []string

	// The dependencies defined for container startup and shutdown. A container can
	// contain multiple dependencies on other containers in a task definition. When a
	// dependency is defined for container startup, for container shutdown it is
	// reversed. For tasks using the EC2 launch type, the container instances require
	// at least version 1.26.0 of the container agent to turn on container
	// dependencies. However, we recommend using the latest container agent version.
	// For information about checking your agent version and updating to the latest
	// version, see Updating the Amazon ECS Container Agent (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html)
	// in the Amazon Elastic Container Service Developer Guide. If you're using an
	// Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of
	// the ecs-init package. If your container instances are launched from version
	// 20190301 or later, then they contain the required versions of the container
	// agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-optimized_AMI.html)
	// in the Amazon Elastic Container Service Developer Guide. For tasks using the
	// Fargate launch type, the task or service requires the following platforms:
	//   - Linux platform version 1.3.0 or later.
	//   - Windows platform version 1.0.0 or later.
	DependsOn []ContainerDependency

	// When this parameter is true, networking is off within the container. This
	// parameter maps to NetworkDisabled in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/) .
	// This parameter is not supported for Windows containers.
	DisableNetworking *bool

	// A list of DNS search domains that are presented to the container. This
	// parameter maps to DnsSearch in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --dns-search option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter is not supported for Windows containers.
	DnsSearchDomains []string

	// A list of DNS servers that are presented to the container. This parameter maps
	// to Dns in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --dns option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter is not supported for Windows containers.
	DnsServers []string

	// A key/value map of labels to add to the container. This parameter maps to Labels
	// in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --label option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter requires version 1.18 of the Docker Remote API or greater on
	// your container instance. To check the Docker Remote API version on your
	// container instance, log in to your container instance and run the following
	// command: sudo docker version --format '{{.Server.APIVersion}}'
	DockerLabels map[string]string

	// A list of strings to provide custom configuration for multiple security
	// systems. For more information about valid values, see Docker Run Security
	// Configuration (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This field isn't valid for containers in tasks using the Fargate launch type.
	// For Linux tasks on EC2, this parameter can be used to reference custom labels
	// for SELinux and AppArmor multi-level security systems. For any tasks on EC2,
	// this parameter can be used to reference a credential spec file that configures a
	// container for Active Directory authentication. For more information, see Using
	// gMSAs for Windows Containers (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/windows-gmsa.html)
	// and Using gMSAs for Linux Containers (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/linux-gmsa.html)
	// in the Amazon Elastic Container Service Developer Guide. This parameter maps to
	// SecurityOpt in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --security-opt option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . The Amazon ECS container agent running on a container instance must register
	// with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment
	// variables before containers placed on that instance can use these security
	// options. For more information, see Amazon ECS Container Agent Configuration (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html)
	// in the Amazon Elastic Container Service Developer Guide. For more information
	// about valid values, see Docker Run Security Configuration (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . Valid values: "no-new-privileges" | "apparmor:PROFILE" | "label:value" |
	// "credentialspec:CredentialSpecFilePath"
	DockerSecurityOptions []string

	// Early versions of the Amazon ECS container agent don't properly handle
	// entryPoint parameters. If you have problems using entryPoint , update your
	// container agent or enter your commands and arguments as command array items
	// instead. The entry point that's passed to the container. This parameter maps to
	// Entrypoint in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --entrypoint option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . For more information, see
	// https://docs.docker.com/engine/reference/builder/#entrypoint (https://docs.docker.com/engine/reference/builder/#entrypoint)
	// .
	EntryPoint []string

	// The environment variables to pass to a container. This parameter maps to Env in
	// the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --env option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . We don't recommend that you use plaintext environment variables for sensitive
	// information, such as credential data.
	Environment []KeyValuePair

	// A list of files containing the environment variables to pass to a container.
	// This parameter maps to the --env-file option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . You can specify up to ten environment files. The file must have a .env file
	// extension. Each line in an environment file contains an environment variable in
	// VARIABLE=VALUE format. Lines beginning with # are treated as comments and are
	// ignored. For more information about the environment variable file syntax, see
	// Declare default environment variables in file (https://docs.docker.com/compose/env-file/)
	// . If there are environment variables specified using the environment parameter
	// in a container definition, they take precedence over the variables contained
	// within an environment file. If multiple environment files are specified that
	// contain the same variable, they're processed from the top down. We recommend
	// that you use unique variable names. For more information, see Specifying
	// Environment Variables (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/taskdef-envfiles.html)
	// in the Amazon Elastic Container Service Developer Guide.
	EnvironmentFiles []EnvironmentFile

	// If the essential parameter of a container is marked as true , and that container
	// fails or stops for any reason, all other containers that are part of the task
	// are stopped. If the essential parameter of a container is marked as false , its
	// failure doesn't affect the rest of the containers in a task. If this parameter
	// is omitted, a container is assumed to be essential. All tasks must have at least
	// one essential container. If you have an application that's composed of multiple
	// containers, group containers that are used for a common purpose into components,
	// and separate the different components into multiple task definitions. For more
	// information, see Application Architecture (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/application_architecture.html)
	// in the Amazon Elastic Container Service Developer Guide.
	Essential *bool

	// A list of hostnames and IP address mappings to append to the /etc/hosts file on
	// the container. This parameter maps to ExtraHosts in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --add-host option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter isn't supported for Windows containers or tasks that use the
	// awsvpc network mode.
	ExtraHosts []HostEntry

	// The FireLens configuration for the container. This is used to specify and
	// configure a log router for container logs. For more information, see Custom Log
	// Routing (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_firelens.html)
	// in the Amazon Elastic Container Service Developer Guide.
	FirelensConfiguration *FirelensConfiguration

	// The container health check command and associated configuration parameters for
	// the container. This parameter maps to HealthCheck in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the HEALTHCHECK parameter of docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// .
	HealthCheck *HealthCheck

	// The hostname to use for your container. This parameter maps to Hostname in the
	// Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --hostname option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . The hostname parameter is not supported if you're using the awsvpc network
	// mode.
	Hostname *string

	// The image used to start a container. This string is passed directly to the
	// Docker daemon. By default, images in the Docker Hub registry are available.
	// Other repositories are specified with either repository-url/image:tag  or
	// repository-url/image@digest . Up to 255 letters (uppercase and lowercase),
	// numbers, hyphens, underscores, colons, periods, forward slashes, and number
	// signs are allowed. This parameter maps to Image in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the IMAGE parameter of docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// .
	//   - When a new task starts, the Amazon ECS container agent pulls the latest
	//   version of the specified image and tag for the container to use. However,
	//   subsequent updates to a repository image aren't propagated to already running
	//   tasks.
	//   - Images in Amazon ECR repositories can be specified by either using the full
	//   registry/repository:tag or registry/repository@digest . For example,
	//   012345678910.dkr.ecr..amazonaws.com/:latest or
	//   012345678910.dkr.ecr..amazonaws.com/@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE
	//   .
	//   - Images in official repositories on Docker Hub use a single name (for
	//   example, ubuntu or mongo ).
	//   - Images in other repositories on Docker Hub are qualified with an
	//   organization name (for example, amazon/amazon-ecs-agent ).
	//   - Images in other online repositories are qualified further by a domain name
	//   (for example, quay.io/assemblyline/ubuntu ).
	Image *string

	// When this parameter is true , you can deploy containerized applications that
	// require stdin or a tty to be allocated. This parameter maps to OpenStdin in the
	// Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --interactive option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// .
	Interactive *bool

	// The links parameter allows containers to communicate with each other without
	// the need for port mappings. This parameter is only supported if the network mode
	// of a task definition is bridge . The name:internalName construct is analogous
	// to name:alias in Docker links. Up to 255 letters (uppercase and lowercase),
	// numbers, underscores, and hyphens are allowed. For more information about
	// linking Docker containers, go to Legacy container links (https://docs.docker.com/network/links/)
	// in the Docker documentation. This parameter maps to Links in the Create a
	// container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --link option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter is not supported for Windows containers. Containers that are
	// collocated on a single container instance may be able to communicate with each
	// other without requiring links or host port mappings. Network isolation is
	// achieved on the container instance using security groups and VPC settings.
	Links []string

	// Linux-specific modifications that are applied to the container, such as Linux
	// kernel capabilities. For more information see KernelCapabilities . This
	// parameter is not supported for Windows containers.
	LinuxParameters *LinuxParameters

	// The log configuration specification for the container. This parameter maps to
	// LogConfig in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --log-driver option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . By default, containers use the same logging driver that the Docker daemon
	// uses. However the container can use a different logging driver than the Docker
	// daemon by specifying a log driver with this parameter in the container
	// definition. To use a different logging driver for a container, the log system
	// must be configured properly on the container instance (or on a different log
	// server for remote logging options). For more information about the options for
	// different supported log drivers, see Configure logging drivers (https://docs.docker.com/engine/admin/logging/overview/)
	// in the Docker documentation. Amazon ECS currently supports a subset of the
	// logging drivers available to the Docker daemon (shown in the LogConfiguration
	// data type). Additional log drivers may be available in future releases of the
	// Amazon ECS container agent. This parameter requires version 1.18 of the Docker
	// Remote API or greater on your container instance. To check the Docker Remote API
	// version on your container instance, log in to your container instance and run
	// the following command: sudo docker version --format '{{.Server.APIVersion}}'
	// The Amazon ECS container agent running on a container instance must register the
	// logging drivers available on that instance with the
	// ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on
	// that instance can use these log configuration options. For more information, see
	// Amazon ECS Container Agent Configuration (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html)
	// in the Amazon Elastic Container Service Developer Guide.
	LogConfiguration *LogConfiguration

	// The amount (in MiB) of memory to present to the container. If your container
	// attempts to exceed the memory specified here, the container is killed. The total
	// amount of memory reserved for all containers within a task must be lower than
	// the task memory value, if one is specified. This parameter maps to Memory in
	// the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --memory option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . If using the Fargate launch type, this parameter is optional. If using the EC2
	// launch type, you must specify either a task-level memory value or a
	// container-level memory value. If you specify both a container-level memory and
	// memoryReservation value, memory must be greater than memoryReservation . If you
	// specify memoryReservation , then that value is subtracted from the available
	// memory resources for the container instance where the container is placed.
	// Otherwise, the value of memory is used. The Docker 20.10.0 or later daemon
	// reserves a minimum of 6 MiB of memory for a container. So, don't specify less
	// than 6 MiB of memory for your containers. The Docker 19.03.13-ce or earlier
	// daemon reserves a minimum of 4 MiB of memory for a container. So, don't specify
	// less than 4 MiB of memory for your containers.
	Memory *int32

	// The soft limit (in MiB) of memory to reserve for the container. When system
	// memory is under heavy contention, Docker attempts to keep the container memory
	// to this soft limit. However, your container can consume more memory when it
	// needs to, up to either the hard limit specified with the memory parameter (if
	// applicable), or all of the available memory on the container instance, whichever
	// comes first. This parameter maps to MemoryReservation in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --memory-reservation option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . If a task-level memory value is not specified, you must specify a non-zero
	// integer for one or both of memory or memoryReservation in a container
	// definition. If you specify both, memory must be greater than memoryReservation .
	// If you specify memoryReservation , then that value is subtracted from the
	// available memory resources for the container instance where the container is
	// placed. Otherwise, the value of memory is used. For example, if your container
	// normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory
	// for short periods of time, you can set a memoryReservation of 128 MiB, and a
	// memory hard limit of 300 MiB. This configuration would allow the container to
	// only reserve 128 MiB of memory from the remaining resources on the container
	// instance, but also allow the container to consume more memory resources when
	// needed. The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory
	// for a container. So, don't specify less than 6 MiB of memory for your
	// containers. The Docker 19.03.13-ce or earlier daemon reserves a minimum of 4 MiB
	// of memory for a container. So, don't specify less than 4 MiB of memory for your
	// containers.
	MemoryReservation *int32

	// The mount points for data volumes in your container. This parameter maps to
	// Volumes in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --volume option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . Windows containers can mount whole directories on the same drive as
	// $env:ProgramData . Windows containers can't mount directories on a different
	// drive, and mount point can't be across drives.
	MountPoints []MountPoint

	// The name of a container. If you're linking multiple containers together in a
	// task definition, the name of one container can be entered in the links of
	// another container to connect the containers. Up to 255 letters (uppercase and
	// lowercase), numbers, underscores, and hyphens are allowed. This parameter maps
	// to name in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --name option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// .
	Name *string

	// The list of port mappings for the container. Port mappings allow containers to
	// access ports on the host container instance to send or receive traffic. For task
	// definitions that use the awsvpc network mode, only specify the containerPort .
	// The hostPort can be left blank or it must be the same value as the containerPort
	// . Port mappings on Windows use the NetNAT gateway address rather than localhost
	// . There's no loopback for port mappings on Windows, so you can't access a
	// container's mapped port from the host itself. This parameter maps to
	// PortBindings in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --publish option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . If the network mode of a task definition is set to none , then you can't
	// specify port mappings. If the network mode of a task definition is set to host ,
	// then host ports must either be undefined or they must match the container port
	// in the port mapping. After a task reaches the RUNNING status, manual and
	// automatic host and container port assignments are visible in the Network
	// Bindings section of a container description for a selected task in the Amazon
	// ECS console. The assignments are also visible in the networkBindings section
	// DescribeTasks responses.
	PortMappings []PortMapping

	// When this parameter is true, the container is given elevated privileges on the
	// host container instance (similar to the root user). This parameter maps to
	// Privileged in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --privileged option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter is not supported for Windows containers or tasks run on
	// Fargate.
	Privileged *bool

	// When this parameter is true , a TTY is allocated. This parameter maps to Tty in
	// the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --tty option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// .
	PseudoTerminal *bool

	// When this parameter is true, the container is given read-only access to its
	// root file system. This parameter maps to ReadonlyRootfs in the Create a
	// container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --read-only option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter is not supported for Windows containers.
	ReadonlyRootFilesystem *bool

	// The private repository authentication credentials to use.
	RepositoryCredentials *RepositoryCredentials

	// The type and amount of a resource to assign to a container. The only supported
	// resource is a GPU.
	ResourceRequirements []ResourceRequirement

	// The secrets to pass to the container. For more information, see Specifying
	// Sensitive Data (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/specifying-sensitive-data.html)
	// in the Amazon Elastic Container Service Developer Guide.
	Secrets []Secret

	// Time duration (in seconds) to wait before giving up on resolving dependencies
	// for a container. For example, you specify two containers in a task definition
	// with containerA having a dependency on containerB reaching a COMPLETE , SUCCESS
	// , or HEALTHY status. If a startTimeout value is specified for containerB and it
	// doesn't reach the desired status within that time then containerA gives up and
	// not start. This results in the task transitioning to a STOPPED state. When the
	// ECS_CONTAINER_START_TIMEOUT container agent configuration variable is used, it's
	// enforced independently from this start timeout value. For tasks using the
	// Fargate launch type, the task or service requires the following platforms:
	//   - Linux platform version 1.3.0 or later.
	//   - Windows platform version 1.0.0 or later.
	// For tasks using the EC2 launch type, your container instances require at least
	// version 1.26.0 of the container agent to use a container start timeout value.
	// However, we recommend using the latest container agent version. For information
	// about checking your agent version and updating to the latest version, see
	// Updating the Amazon ECS Container Agent (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html)
	// in the Amazon Elastic Container Service Developer Guide. If you're using an
	// Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1
	// of the ecs-init package. If your container instances are launched from version
	// 20190301 or later, then they contain the required versions of the container
	// agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-optimized_AMI.html)
	// in the Amazon Elastic Container Service Developer Guide.
	StartTimeout *int32

	// Time duration (in seconds) to wait before the container is forcefully killed if
	// it doesn't exit normally on its own. For tasks using the Fargate launch type,
	// the task or service requires the following platforms:
	//   - Linux platform version 1.3.0 or later.
	//   - Windows platform version 1.0.0 or later.
	// The max stop timeout value is 120 seconds and if the parameter is not
	// specified, the default value of 30 seconds is used. For tasks that use the EC2
	// launch type, if the stopTimeout parameter isn't specified, the value set for
	// the Amazon ECS container agent configuration variable ECS_CONTAINER_STOP_TIMEOUT
	// is used. If neither the stopTimeout parameter or the ECS_CONTAINER_STOP_TIMEOUT
	// agent configuration variable are set, then the default values of 30 seconds for
	// Linux containers and 30 seconds on Windows containers are used. Your container
	// instances require at least version 1.26.0 of the container agent to use a
	// container stop timeout value. However, we recommend using the latest container
	// agent version. For information about checking your agent version and updating to
	// the latest version, see Updating the Amazon ECS Container Agent (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html)
	// in the Amazon Elastic Container Service Developer Guide. If you're using an
	// Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of
	// the ecs-init package. If your container instances are launched from version
	// 20190301 or later, then they contain the required versions of the container
	// agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-optimized_AMI.html)
	// in the Amazon Elastic Container Service Developer Guide.
	StopTimeout *int32

	// A list of namespaced kernel parameters to set in the container. This parameter
	// maps to Sysctls in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --sysctl option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . We don't recommended that you specify network-related systemControls
	// parameters for multiple containers in a single task that also uses either the
	// awsvpc or host network modes. For tasks that use the awsvpc network mode, the
	// container that's started last determines which systemControls parameters take
	// effect. For tasks that use the host network mode, it changes the container
	// instance's namespaced kernel parameters as well as the containers.
	SystemControls []SystemControl

	// A list of ulimits to set in the container. If a ulimit value is specified in a
	// task definition, it overrides the default values set by Docker. This parameter
	// maps to Ulimits in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --ulimit option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . Valid naming values are displayed in the Ulimit data type. Amazon ECS tasks
	// hosted on Fargate use the default resource limit values set by the operating
	// system with the exception of the nofile resource limit parameter which Fargate
	// overrides. The nofile resource limit sets a restriction on the number of open
	// files that a container can use. The default nofile soft limit is 1024 and the
	// default hard limit is 4096 . This parameter requires version 1.18 of the Docker
	// Remote API or greater on your container instance. To check the Docker Remote API
	// version on your container instance, log in to your container instance and run
	// the following command: sudo docker version --format '{{.Server.APIVersion}}'
	// This parameter is not supported for Windows containers.
	Ulimits []Ulimit

	// The user to use inside the container. This parameter maps to User in the Create
	// a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --user option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . When running tasks using the host network mode, don't run containers using
	// the root user (UID 0). We recommend using a non-root user for better security.
	// You can specify the user using the following formats. If specifying a UID or
	// GID, you must specify it as a positive integer.
	//   - user
	//   - user:group
	//   - uid
	//   - uid:gid
	//   - user:gid
	//   - uid:group
	// This parameter is not supported for Windows containers.
	User *string

	// Data volumes to mount from another container. This parameter maps to VolumesFrom
	// in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --volumes-from option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// .
	VolumesFrom []VolumeFrom

	// The working directory to run commands inside the container in. This parameter
	// maps to WorkingDir in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --workdir option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// .
	WorkingDirectory *string

	noSmithyDocumentSerde
}

// The dependencies defined for container startup and shutdown. A container can
// contain multiple dependencies. When a dependency is defined for container
// startup, for container shutdown it is reversed. Your Amazon ECS container
// instances require at least version 1.26.0 of the container agent to use
// container dependencies. However, we recommend using the latest container agent
// version. For information about checking your agent version and updating to the
// latest version, see Updating the Amazon ECS Container Agent (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html)
// in the Amazon Elastic Container Service Developer Guide. If you're using an
// Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of
// the ecs-init package. If your container instances are launched from version
// 20190301 or later, then they contain the required versions of the container
// agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-optimized_AMI.html)
// in the Amazon Elastic Container Service Developer Guide. For tasks that use the
// Fargate launch type, the task or service requires the following platforms:
//   - Linux platform version 1.3.0 or later.
//   - Windows platform version 1.0.0 or later.
type ContainerDependency struct {

	// The dependency condition of the container. The following are the available
	// conditions and their behavior:
	//   - START - This condition emulates the behavior of links and volumes today. It
	//   validates that a dependent container is started before permitting other
	//   containers to start.
	//   - COMPLETE - This condition validates that a dependent container runs to
	//   completion (exits) before permitting other containers to start. This can be
	//   useful for nonessential containers that run a script and then exit. This
	//   condition can't be set on an essential container.
	//   - SUCCESS - This condition is the same as COMPLETE , but it also requires that
	//   the container exits with a zero status. This condition can't be set on an
	//   essential container.
	//   - HEALTHY - This condition validates that the dependent container passes its
	//   Docker health check before permitting other containers to start. This requires
	//   that the dependent container has health checks configured. This condition is
	//   confirmed only at task startup.
	//
	// This member is required.
	Condition ContainerCondition

	// The name of a container.
	//
	// This member is required.
	ContainerName *string

	noSmithyDocumentSerde
}

// An Amazon EC2 or External instance that's running the Amazon ECS agent and has
// been registered with a cluster.
type ContainerInstance struct {

	// This parameter returns true if the agent is connected to Amazon ECS. An
	// instance with an agent that may be unhealthy or stopped return false . Only
	// instances connected to an agent can accept task placement requests.
	AgentConnected bool

	// The status of the most recent agent update. If an update wasn't ever requested,
	// this value is NULL .
	AgentUpdateStatus AgentUpdateStatus

	// The resources attached to a container instance, such as an elastic network
	// interface.
	Attachments []Attachment

	// The attributes set for the container instance, either by the Amazon ECS
	// container agent at instance registration or manually with the PutAttributes
	// operation.
	Attributes []Attribute

	// The capacity provider that's associated with the container instance.
	CapacityProviderName *string

	// The Amazon Resource Name (ARN) of the container instance. For more information
	// about the ARN format, see Amazon Resource Name (ARN) (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#ecs-resource-ids)
	// in the Amazon ECS Developer Guide.
	ContainerInstanceArn *string

	// The ID of the container instance. For Amazon EC2 instances, this value is the
	// Amazon EC2 instance ID. For external instances, this value is the Amazon Web
	// Services Systems Manager managed instance ID.
	Ec2InstanceId *string

	// An object representing the health status of the container instance.
	HealthStatus *ContainerInstanceHealthStatus

	// The number of tasks on the container instance that are in the PENDING status.
	PendingTasksCount int32

	// The Unix timestamp for the time when the container instance was registered.
	RegisteredAt *time.Time

	// For CPU and memory resource types, this parameter describes the amount of each
	// resource that was available on the container instance when the container agent
	// registered it with Amazon ECS. This value represents the total amount of CPU and
	// memory that can be allocated on this container instance to tasks. For port
	// resource types, this parameter describes the ports that were reserved by the
	// Amazon ECS container agent when it registered the container instance with Amazon
	// ECS.
	RegisteredResources []Resource

	// For CPU and memory resource types, this parameter describes the remaining CPU
	// and memory that wasn't already allocated to tasks and is therefore available for
	// new tasks. For port resource types, this parameter describes the ports that were
	// reserved by the Amazon ECS container agent (at instance registration time) and
	// any task containers that have reserved port mappings on the host (with the host
	// or bridge network mode). Any port that's not specified here is available for
	// new tasks.
	RemainingResources []Resource

	// The number of tasks on the container instance that are in the RUNNING status.
	RunningTasksCount int32

	// The status of the container instance. The valid values are REGISTERING ,
	// REGISTRATION_FAILED , ACTIVE , INACTIVE , DEREGISTERING , or DRAINING . If your
	// account has opted in to the awsvpcTrunking account setting, then any newly
	// registered container instance will transition to a REGISTERING status while the
	// trunk elastic network interface is provisioned for the instance. If the
	// registration fails, the instance will transition to a REGISTRATION_FAILED
	// status. You can describe the container instance and see the reason for failure
	// in the statusReason parameter. Once the container instance is terminated, the
	// instance transitions to a DEREGISTERING status while the trunk elastic network
	// interface is deprovisioned. The instance then transitions to an INACTIVE
	// status. The ACTIVE status indicates that the container instance can accept
	// tasks. The DRAINING indicates that new tasks aren't placed on the container
	// instance and any service tasks running on the container instance are removed if
	// possible. For more information, see Container instance draining (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/container-instance-draining.html)
	// in the Amazon Elastic Container Service Developer Guide.
	Status *string

	// The reason that the container instance reached its current status.
	StatusReason *string

	// The metadata that you apply to the container instance to help you categorize
	// and organize them. Each tag consists of a key and an optional value. You define
	// both. The following basic restrictions apply to tags:
	//   - Maximum number of tags per resource - 50
	//   - For each resource, each tag key must be unique, and each tag key can have
	//   only one value.
	//   - Maximum key length - 128 Unicode characters in UTF-8
	//   - Maximum value length - 256 Unicode characters in UTF-8
	//   - If your tagging schema is used across multiple services and resources,
	//   remember that other services may have restrictions on allowed characters.
	//   Generally allowed characters are: letters, numbers, and spaces representable in
	//   UTF-8, and the following characters: + - = . _ : / @.
	//   - Tag keys and values are case-sensitive.
	//   - Do not use aws: , AWS: , or any upper or lowercase combination of such as a
	//   prefix for either keys or values as it is reserved for Amazon Web Services use.
	//   You cannot edit or delete tag keys or values with this prefix. Tags with this
	//   prefix do not count against your tags per resource limit.
	Tags []Tag

	// The version counter for the container instance. Every time a container instance
	// experiences a change that triggers a CloudWatch event, the version counter is
	// incremented. If you're replicating your Amazon ECS container instance state with
	// CloudWatch Events, you can compare the version of a container instance reported
	// by the Amazon ECS APIs with the version reported in CloudWatch Events for the
	// container instance (inside the detail object) to verify that the version in
	// your event stream is current.
	Version int64

	// The version information for the Amazon ECS container agent and Docker daemon
	// running on the container instance.
	VersionInfo *VersionInfo

	noSmithyDocumentSerde
}

// An object representing the health status of the container instance.
type ContainerInstanceHealthStatus struct {

	// An array of objects representing the details of the container instance health
	// status.
	Details []InstanceHealthCheckResult

	// The overall health status of the container instance. This is an aggregate
	// status of all container instance health checks.
	OverallStatus InstanceHealthCheckState

	noSmithyDocumentSerde
}

// The overrides that are sent to a container. An empty container override can be
// passed in. An example of an empty container override is {"containerOverrides":
// [ ] } . If a non-empty container override is specified, the name parameter must
// be included.
type ContainerOverride struct {

	// The command to send to the container that overrides the default command from
	// the Docker image or the task definition. You must also specify a container name.
	Command []string

	// The number of cpu units reserved for the container, instead of the default
	// value from the task definition. You must also specify a container name.
	Cpu *int32

	// The environment variables to send to the container. You can add new environment
	// variables, which are added to the container at launch, or you can override the
	// existing environment variables from the Docker image or the task definition. You
	// must also specify a container name.
	Environment []KeyValuePair

	// A list of files containing the environment variables to pass to a container,
	// instead of the value from the container definition.
	EnvironmentFiles []EnvironmentFile

	// The hard limit (in MiB) of memory to present to the container, instead of the
	// default value from the task definition. If your container attempts to exceed the
	// memory specified here, the container is killed. You must also specify a
	// container name.
	Memory *int32

	// The soft limit (in MiB) of memory to reserve for the container, instead of the
	// default value from the task definition. You must also specify a container name.
	MemoryReservation *int32

	// The name of the container that receives the override. This parameter is
	// required if any override is specified.
	Name *string

	// The type and amount of a resource to assign to a container, instead of the
	// default value from the task definition. The only supported resource is a GPU.
	ResourceRequirements []ResourceRequirement

	noSmithyDocumentSerde
}

// An object that represents a change in state for a container.
type ContainerStateChange struct {

	// The name of the container.
	ContainerName *string

	// The exit code for the container, if the state change is a result of the
	// container exiting.
	ExitCode *int32

	// The container image SHA 256 digest.
	ImageDigest *string

	// Any network bindings that are associated with the container.
	NetworkBindings []NetworkBinding

	// The reason for the state change.
	Reason *string

	// The ID of the Docker container.
	RuntimeId *string

	// The status of the container.
	Status *string

	noSmithyDocumentSerde
}

// The details of an Amazon ECS service deployment. This is used only when a
// service uses the ECS deployment controller type.
type Deployment struct {

	// The capacity provider strategy that the deployment is using.
	CapacityProviderStrategy []CapacityProviderStrategyItem

	// The Unix timestamp for the time when the service deployment was created.
	CreatedAt *time.Time

	// The most recent desired count of tasks that was specified for the service to
	// deploy or maintain.
	DesiredCount int32

	// The number of consecutively failed tasks in the deployment. A task is
	// considered a failure if the service scheduler can't launch the task, the task
	// doesn't transition to a RUNNING state, or if it fails any of its defined health
	// checks and is stopped. Once a service deployment has one or more successfully
	// running tasks, the failed task count resets to zero and stops being evaluated.
	FailedTasks int32

	// The ID of the deployment.
	Id *string

	// The launch type the tasks in the service are using. For more information, see
	// Amazon ECS Launch Types (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/launch_types.html)
	// in the Amazon Elastic Container Service Developer Guide.
	LaunchType LaunchType

	// The VPC subnet and security group configuration for tasks that receive their
	// own elastic network interface by using the awsvpc networking mode.
	NetworkConfiguration *NetworkConfiguration

	// The number of tasks in the deployment that are in the PENDING status.
	PendingCount int32

	// The operating system that your tasks in the service, or tasks are running on. A
	// platform family is specified only for tasks using the Fargate launch type. All
	// tasks that run as part of this service must use the same platformFamily value
	// as the service, for example, LINUX. .
	PlatformFamily *string

	// The platform version that your tasks in the service run on. A platform version
	// is only specified for tasks using the Fargate launch type. If one isn't
	// specified, the LATEST platform version is used. For more information, see
	// Fargate Platform Versions (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/platform_versions.html)
	// in the Amazon Elastic Container Service Developer Guide.
	PlatformVersion *string

	// The rolloutState of a service is only returned for services that use the
	// rolling update ( ECS ) deployment type that aren't behind a Classic Load
	// Balancer. The rollout state of the deployment. When a service deployment is
	// started, it begins in an IN_PROGRESS state. When the service reaches a steady
	// state, the deployment transitions to a COMPLETED state. If the service fails to
	// reach a steady state and circuit breaker is turned on, the deployment
	// transitions to a FAILED state. A deployment in FAILED state doesn't launch any
	// new tasks. For more information, see DeploymentCircuitBreaker .
	RolloutState DeploymentRolloutState

	// A description of the rollout state of a deployment.
	RolloutStateReason *string

	// The number of tasks in the deployment that are in the RUNNING status.
	RunningCount int32

	// The details of the Service Connect configuration that's used by this
	// deployment. Compare the configuration between multiple deployments when
	// troubleshooting issues with new deployments. The configuration for this service
	// to discover and connect to services, and be discovered by, and connected from,
	// other services within a namespace. Tasks that run in a namespace can use short
	// names to connect to services in the namespace. Tasks can connect to services
	// across all of the clusters in the namespace. Tasks connect through a managed
	// proxy container that collects logs and metrics for increased visibility. Only
	// the tasks that Amazon ECS services create are supported with Service Connect.
	// For more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
	// in the Amazon Elastic Container Service Developer Guide.
	ServiceConnectConfiguration *ServiceConnectConfiguration

	// The list of Service Connect resources that are associated with this deployment.
	// Each list entry maps a discovery name to a Cloud Map service name.
	ServiceConnectResources []ServiceConnectServiceResource

	// The status of the deployment. The following describes each state. PRIMARY The
	// most recent deployment of a service. ACTIVE A service deployment that still has
	// running tasks, but are in the process of being replaced with a new PRIMARY
	// deployment. INACTIVE A deployment that has been completely replaced.
	Status *string

	// The most recent task definition that was specified for the tasks in the service
	// to use.
	TaskDefinition *string

	// The Unix timestamp for the time when the service deployment was last updated.
	UpdatedAt *time.Time

	noSmithyDocumentSerde
}

// One of the methods which provide a way for you to quickly identify when a
// deployment has failed, and then to optionally roll back the failure to the last
// working deployment. When the alarms are generated, Amazon ECS sets the service
// deployment to failed. Set the rollback parameter to have Amazon ECS to roll back
// your service to the last completed deployment after a failure. You can only use
// the DeploymentAlarms method to detect failures when the DeploymentController is
// set to ECS (rolling update). For more information, see Rolling update (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-type-ecs.html)
// in the Amazon Elastic Container Service Developer Guide .
type DeploymentAlarms struct {

	// One or more CloudWatch alarm names. Use a "," to separate the alarms.
	//
	// This member is required.
	AlarmNames []string

	// Determines whether to use the CloudWatch alarm option in the service deployment
	// process.
	//
	// This member is required.
	Enable bool

	// Determines whether to configure Amazon ECS to roll back the service if a
	// service deployment fails. If rollback is used, when a service deployment fails,
	// the service is rolled back to the last deployment that completed successfully.
	//
	// This member is required.
	Rollback bool

	noSmithyDocumentSerde
}

// The deployment circuit breaker can only be used for services using the rolling
// update ( ECS ) deployment type. The deployment circuit breaker determines
// whether a service deployment will fail if the service can't reach a steady
// state. If it is turned on, a service deployment will transition to a failed
// state and stop launching new tasks. You can also configure Amazon ECS to roll
// back your service to the last completed deployment after a failure. For more
// information, see Rolling update (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-type-ecs.html)
// in the Amazon Elastic Container Service Developer Guide.
type DeploymentCircuitBreaker struct {

	// Determines whether to use the deployment circuit breaker logic for the service.
	//
	// This member is required.
	Enable bool

	// Determines whether to configure Amazon ECS to roll back the service if a
	// service deployment fails. If rollback is on, when a service deployment fails,
	// the service is rolled back to the last deployment that completed successfully.
	//
	// This member is required.
	Rollback bool

	noSmithyDocumentSerde
}

// Optional deployment parameters that control how many tasks run during a
// deployment and the ordering of stopping and starting tasks.
type DeploymentConfiguration struct {

	// Information about the CloudWatch alarms.
	Alarms *DeploymentAlarms

	// The deployment circuit breaker can only be used for services using the rolling
	// update ( ECS ) deployment type. The deployment circuit breaker determines
	// whether a service deployment will fail if the service can't reach a steady
	// state. If you use the deployment circuit breaker, a service deployment will
	// transition to a failed state and stop launching new tasks. If you use the
	// rollback option, when a service deployment fails, the service is rolled back to
	// the last deployment that completed successfully. For more information, see
	// Rolling update (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-type-ecs.html)
	// in the Amazon Elastic Container Service Developer Guide
	DeploymentCircuitBreaker *DeploymentCircuitBreaker

	// If a service is using the rolling update ( ECS ) deployment type, the
	// maximumPercent parameter represents an upper limit on the number of your
	// service's tasks that are allowed in the RUNNING or PENDING state during a
	// deployment, as a percentage of the desiredCount (rounded down to the nearest
	// integer). This parameter enables you to define the deployment batch size. For
	// example, if your service is using the REPLICA service scheduler and has a
	// desiredCount of four tasks and a maximumPercent value of 200%, the scheduler
	// may start four new tasks before stopping the four older tasks (provided that the
	// cluster resources required to do this are available). The default maximumPercent
	// value for a service using the REPLICA service scheduler is 200%. If a service
	// is using either the blue/green ( CODE_DEPLOY ) or EXTERNAL deployment types and
	// tasks that use the EC2 launch type, the maximum percent value is set to the
	// default value and is used to define the upper limit on the number of the tasks
	// in the service that remain in the RUNNING state while the container instances
	// are in the DRAINING state. If the tasks in the service use the Fargate launch
	// type, the maximum percent value is not used, although it is returned when
	// describing your service.
	MaximumPercent *int32

	// If a service is using the rolling update ( ECS ) deployment type, the
	// minimumHealthyPercent represents a lower limit on the number of your service's
	// tasks that must remain in the RUNNING state during a deployment, as a
	// percentage of the desiredCount (rounded up to the nearest integer). This
	// parameter enables you to deploy without using additional cluster capacity. For
	// example, if your service has a desiredCount of four tasks and a
	// minimumHealthyPercent of 50%, the service scheduler may stop two existing tasks
	// to free up cluster capacity before starting two new tasks. For services that do
	// not use a load balancer, the following should be noted:
	//   - A service is considered healthy if all essential containers within the
	//   tasks in the service pass their health checks.
	//   - If a task has no essential containers with a health check defined, the
	//   service scheduler will wait for 40 seconds after a task reaches a RUNNING
	//   state before the task is counted towards the minimum healthy percent total.
	//   - If a task has one or more essential containers with a health check defined,
	//   the service scheduler will wait for the task to reach a healthy status before
	//   counting it towards the minimum healthy percent total. A task is considered
	//   healthy when all essential containers within the task have passed their health
	//   checks. The amount of time the service scheduler can wait for is determined by
	//   the container health check settings.
	// For services are that do use a load balancer, the following should be noted:
	//   - If a task has no essential containers with a health check defined, the
	//   service scheduler will wait for the load balancer target group health check to
	//   return a healthy status before counting the task towards the minimum healthy
	//   percent total.
	//   - If a task has an essential container with a health check defined, the
	//   service scheduler will wait for both the task to reach a healthy status and the
	//   load balancer target group health check to return a healthy status before
	//   counting the task towards the minimum healthy percent total.
	// If a service is using either the blue/green ( CODE_DEPLOY ) or EXTERNAL
	// deployment types and is running tasks that use the EC2 launch type, the minimum
	// healthy percent value is set to the default value and is used to define the
	// lower limit on the number of the tasks in the service that remain in the RUNNING
	// state while the container instances are in the DRAINING state. If a service is
	// using either the blue/green ( CODE_DEPLOY ) or EXTERNAL deployment types and is
	// running tasks that use the Fargate launch type, the minimum healthy percent
	// value is not used, although it is returned when describing your service.
	MinimumHealthyPercent *int32

	noSmithyDocumentSerde
}

// The deployment controller to use for the service. For more information, see
// Amazon ECS deployment types (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-types.html)
// in the Amazon Elastic Container Service Developer Guide.
type DeploymentController struct {

	// The deployment controller type to use. There are three deployment controller
	// types available: ECS The rolling update ( ECS ) deployment type involves
	// replacing the current running version of the container with the latest version.
	// The number of containers Amazon ECS adds or removes from the service during a
	// rolling update is controlled by adjusting the minimum and maximum number of
	// healthy tasks allowed during a service deployment, as specified in the
	// DeploymentConfiguration . CODE_DEPLOY The blue/green ( CODE_DEPLOY ) deployment
	// type uses the blue/green deployment model powered by CodeDeploy, which allows
	// you to verify a new deployment of a service before sending production traffic to
	// it. EXTERNAL The external ( EXTERNAL ) deployment type enables you to use any
	// third-party deployment controller for full control over the deployment process
	// for an Amazon ECS service.
	//
	// This member is required.
	Type DeploymentControllerType

	noSmithyDocumentSerde
}

// An object representing a container instance host device.
type Device struct {

	// The path for the device on the host container instance.
	//
	// This member is required.
	HostPath *string

	// The path inside the container at which to expose the host device.
	ContainerPath *string

	// The explicit permissions to provide to the container for the device. By
	// default, the container has permissions for read , write , and mknod for the
	// device.
	Permissions []DeviceCgroupPermission

	noSmithyDocumentSerde
}

// This parameter is specified when you're using Docker volumes. Docker volumes
// are only supported when you're using the EC2 launch type. Windows containers
// only support the use of the local driver. To use bind mounts, specify a host
// instead.
type DockerVolumeConfiguration struct {

	// If this value is true , the Docker volume is created if it doesn't already
	// exist. This field is only used if the scope is shared .
	Autoprovision *bool

	// The Docker volume driver to use. The driver value must match the driver name
	// provided by Docker because it is used for task placement. If the driver was
	// installed using the Docker plugin CLI, use docker plugin ls to retrieve the
	// driver name from your container instance. If the driver was installed using
	// another method, use Docker plugin discovery to retrieve the driver name. For
	// more information, see Docker plugin discovery (https://docs.docker.com/engine/extend/plugin_api/#plugin-discovery)
	// . This parameter maps to Driver in the Create a volume (https://docs.docker.com/engine/api/v1.35/#operation/VolumeCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the xxdriver option to docker volume create (https://docs.docker.com/engine/reference/commandline/volume_create/)
	// .
	Driver *string

	// A map of Docker driver-specific options passed through. This parameter maps to
	// DriverOpts in the Create a volume (https://docs.docker.com/engine/api/v1.35/#operation/VolumeCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the xxopt option to docker volume create (https://docs.docker.com/engine/reference/commandline/volume_create/)
	// .
	DriverOpts map[string]string

	// Custom metadata to add to your Docker volume. This parameter maps to Labels in
	// the Create a volume (https://docs.docker.com/engine/api/v1.35/#operation/VolumeCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the xxlabel option to docker volume create (https://docs.docker.com/engine/reference/commandline/volume_create/)
	// .
	Labels map[string]string

	// The scope for the Docker volume that determines its lifecycle. Docker volumes
	// that are scoped to a task are automatically provisioned when the task starts
	// and destroyed when the task stops. Docker volumes that are scoped as shared
	// persist after the task stops.
	Scope Scope

	noSmithyDocumentSerde
}

// The authorization configuration details for the Amazon EFS file system.
type EFSAuthorizationConfig struct {

	// The Amazon EFS access point ID to use. If an access point is specified, the
	// root directory value specified in the EFSVolumeConfiguration must either be
	// omitted or set to / which will enforce the path set on the EFS access point. If
	// an access point is used, transit encryption must be on in the
	// EFSVolumeConfiguration . For more information, see Working with Amazon EFS
	// access points (https://docs.aws.amazon.com/efs/latest/ug/efs-access-points.html)
	// in the Amazon Elastic File System User Guide.
	AccessPointId *string

	// Determines whether to use the Amazon ECS task role defined in a task definition
	// when mounting the Amazon EFS file system. If it is turned on, transit encryption
	// must be turned on in the EFSVolumeConfiguration . If this parameter is omitted,
	// the default value of DISABLED is used. For more information, see Using Amazon
	// EFS access points (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/efs-volumes.html#efs-volume-accesspoints)
	// in the Amazon Elastic Container Service Developer Guide.
	Iam EFSAuthorizationConfigIAM

	noSmithyDocumentSerde
}

// This parameter is specified when you're using an Amazon Elastic File System
// file system for task storage. For more information, see Amazon EFS volumes (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/efs-volumes.html)
// in the Amazon Elastic Container Service Developer Guide.
type EFSVolumeConfiguration struct {

	// The Amazon EFS file system ID to use.
	//
	// This member is required.
	FileSystemId *string

	// The authorization configuration details for the Amazon EFS file system.
	AuthorizationConfig *EFSAuthorizationConfig

	// The directory within the Amazon EFS file system to mount as the root directory
	// inside the host. If this parameter is omitted, the root of the Amazon EFS volume
	// will be used. Specifying / will have the same effect as omitting this
	// parameter. If an EFS access point is specified in the authorizationConfig , the
	// root directory parameter must either be omitted or set to / which will enforce
	// the path set on the EFS access point.
	RootDirectory *string

	// Determines whether to use encryption for Amazon EFS data in transit between the
	// Amazon ECS host and the Amazon EFS server. Transit encryption must be turned on
	// if Amazon EFS IAM authorization is used. If this parameter is omitted, the
	// default value of DISABLED is used. For more information, see Encrypting data in
	// transit (https://docs.aws.amazon.com/efs/latest/ug/encryption-in-transit.html)
	// in the Amazon Elastic File System User Guide.
	TransitEncryption EFSTransitEncryption

	// The port to use when sending encrypted data between the Amazon ECS host and the
	// Amazon EFS server. If you do not specify a transit encryption port, it will use
	// the port selection strategy that the Amazon EFS mount helper uses. For more
	// information, see EFS mount helper (https://docs.aws.amazon.com/efs/latest/ug/efs-mount-helper.html)
	// in the Amazon Elastic File System User Guide.
	TransitEncryptionPort *int32

	noSmithyDocumentSerde
}

// A list of files containing the environment variables to pass to a container.
// You can specify up to ten environment files. The file must have a .env file
// extension. Each line in an environment file should contain an environment
// variable in VARIABLE=VALUE format. Lines beginning with # are treated as
// comments and are ignored. For more information about the environment variable
// file syntax, see Declare default environment variables in file (https://docs.docker.com/compose/env-file/)
// . If there are environment variables specified using the environment parameter
// in a container definition, they take precedence over the variables contained
// within an environment file. If multiple environment files are specified that
// contain the same variable, they're processed from the top down. We recommend
// that you use unique variable names. For more information, see Specifying
// environment variables (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/taskdef-envfiles.html)
// in the Amazon Elastic Container Service Developer Guide. This parameter is only
// supported for tasks hosted on Fargate using the following platform versions:
//   - Linux platform version 1.4.0 or later.
//   - Windows platform version 1.0.0 or later.
type EnvironmentFile struct {

	// The file type to use. The only supported value is s3 .
	//
	// This member is required.
	Type EnvironmentFileType

	// The Amazon Resource Name (ARN) of the Amazon S3 object containing the
	// environment variable file.
	//
	// This member is required.
	Value *string

	noSmithyDocumentSerde
}

// The amount of ephemeral storage to allocate for the task. This parameter is
// used to expand the total amount of ephemeral storage available, beyond the
// default amount, for tasks hosted on Fargate. For more information, see Fargate
// task storage (https://docs.aws.amazon.com/AmazonECS/latest/userguide/using_data_volumes.html)
// in the Amazon ECS User Guide for Fargate. For tasks using the Fargate launch
// type, the task requires the following platforms:
//   - Linux platform version 1.4.0 or later.
//   - Windows platform version 1.0.0 or later.
type EphemeralStorage struct {

	// The total amount, in GiB, of ephemeral storage to set for the task. The minimum
	// supported value is 21 GiB and the maximum supported value is 200 GiB.
	//
	// This member is required.
	SizeInGiB int32

	noSmithyDocumentSerde
}

// The details of the execute command configuration.
type ExecuteCommandConfiguration struct {

	// Specify an Key Management Service key ID to encrypt the data between the local
	// client and the container.
	KmsKeyId *string

	// The log configuration for the results of the execute command actions. The logs
	// can be sent to CloudWatch Logs or an Amazon S3 bucket. When logging=OVERRIDE is
	// specified, a logConfiguration must be provided.
	LogConfiguration *ExecuteCommandLogConfiguration

	// The log setting to use for redirecting logs for your execute command results.
	// The following log settings are available.
	//   - NONE : The execute command session is not logged.
	//   - DEFAULT : The awslogs configuration in the task definition is used. If no
	//   logging parameter is specified, it defaults to this value. If no awslogs log
	//   driver is configured in the task definition, the output won't be logged.
	//   - OVERRIDE : Specify the logging details as a part of logConfiguration . If
	//   the OVERRIDE logging option is specified, the logConfiguration is required.
	Logging ExecuteCommandLogging

	noSmithyDocumentSerde
}

// The log configuration for the results of the execute command actions. The logs
// can be sent to CloudWatch Logs or an Amazon S3 bucket.
type ExecuteCommandLogConfiguration struct {

	// Determines whether to use encryption on the CloudWatch logs. If not specified,
	// encryption will be off.
	CloudWatchEncryptionEnabled bool

	// The name of the CloudWatch log group to send logs to. The CloudWatch log group
	// must already be created.
	CloudWatchLogGroupName *string

	// The name of the S3 bucket to send logs to. The S3 bucket must already be
	// created.
	S3BucketName *string

	// Determines whether to use encryption on the S3 logs. If not specified,
	// encryption is not used.
	S3EncryptionEnabled bool

	// An optional folder in the S3 bucket to place logs in.
	S3KeyPrefix *string

	noSmithyDocumentSerde
}

// A failed resource. For a list of common causes, see API failure reasons (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/api_failures_messages.html)
// in the Amazon Elastic Container Service Developer Guide.
type Failure struct {

	// The Amazon Resource Name (ARN) of the failed resource.
	Arn *string

	// The details of the failure.
	Detail *string

	// The reason for the failure.
	Reason *string

	noSmithyDocumentSerde
}

// The FireLens configuration for the container. This is used to specify and
// configure a log router for container logs. For more information, see Custom log
// routing (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_firelens.html)
// in the Amazon Elastic Container Service Developer Guide.
type FirelensConfiguration struct {

	// The log router to use. The valid values are fluentd or fluentbit .
	//
	// This member is required.
	Type FirelensConfigurationType

	// The options to use when configuring the log router. This field is optional and
	// can be used to specify a custom configuration file or to add additional
	// metadata, such as the task, task definition, cluster, and container instance
	// details to the log event. If specified, the syntax to use is
	// "options":{"enable-ecs-log-metadata":"true|false","config-file-type:"s3|file","config-file-value":"arn:aws:s3:::mybucket/fluent.conf|filepath"}
	// . For more information, see Creating a task definition that uses a FireLens
	// configuration (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_firelens.html#firelens-taskdef)
	// in the Amazon Elastic Container Service Developer Guide. Tasks hosted on Fargate
	// only support the file configuration file type.
	Options map[string]string

	noSmithyDocumentSerde
}

// The authorization configuration details for Amazon FSx for Windows File Server
// file system. See FSxWindowsFileServerVolumeConfiguration (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_FSxWindowsFileServerVolumeConfiguration.html)
// in the Amazon ECS API Reference. For more information and the input format, see
// Amazon FSx for Windows File Server Volumes (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/wfsx-volumes.html)
// in the Amazon Elastic Container Service Developer Guide.
type FSxWindowsFileServerAuthorizationConfig struct {

	// The authorization credential option to use. The authorization credential
	// options can be provided using either the Amazon Resource Name (ARN) of an
	// Secrets Manager secret or SSM Parameter Store parameter. The ARN refers to the
	// stored credentials.
	//
	// This member is required.
	CredentialsParameter *string

	// A fully qualified domain name hosted by an Directory Service (https://docs.aws.amazon.com/directoryservice/latest/admin-guide/directory_microsoft_ad.html)
	// Managed Microsoft AD (Active Directory) or self-hosted AD on Amazon EC2.
	//
	// This member is required.
	Domain *string

	noSmithyDocumentSerde
}

// This parameter is specified when you're using Amazon FSx for Windows File Server (https://docs.aws.amazon.com/fsx/latest/WindowsGuide/what-is.html)
// file system for task storage. For more information and the input format, see
// Amazon FSx for Windows File Server volumes (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/wfsx-volumes.html)
// in the Amazon Elastic Container Service Developer Guide.
type FSxWindowsFileServerVolumeConfiguration struct {

	// The authorization configuration details for the Amazon FSx for Windows File
	// Server file system.
	//
	// This member is required.
	AuthorizationConfig *FSxWindowsFileServerAuthorizationConfig

	// The Amazon FSx for Windows File Server file system ID to use.
	//
	// This member is required.
	FileSystemId *string

	// The directory within the Amazon FSx for Windows File Server file system to
	// mount as the root directory inside the host.
	//
	// This member is required.
	RootDirectory *string

	noSmithyDocumentSerde
}

// An object representing a container health check. Health check parameters that
// are specified in a container definition override any Docker health checks that
// exist in the container image (such as those specified in a parent image or from
// the image's Dockerfile). This configuration maps to the HEALTHCHECK parameter
// of docker run (https://docs.docker.com/engine/reference/run/) . The Amazon ECS
// container agent only monitors and reports on the health checks specified in the
// task definition. Amazon ECS does not monitor Docker health checks that are
// embedded in a container image and not specified in the container definition.
// Health check parameters that are specified in a container definition override
// any Docker health checks that exist in the container image. You can view the
// health status of both individual containers and a task with the DescribeTasks
// API operation or when viewing the task details in the console. The health check
// is designed to make sure that your containers survive agent restarts, upgrades,
// or temporary unavailability. The following describes the possible healthStatus
// values for a container:
//   - HEALTHY -The container health check has passed successfully.
//   - UNHEALTHY -The container health check has failed.
//   - UNKNOWN -The container health check is being evaluated or there's no
//     container health check defined.
//
// The following describes the possible healthStatus values for a task. The
// container health check status of non-essential containers don't have an effect
// on the health status of a task.
//   - HEALTHY -All essential containers within the task have passed their health
//     checks.
//   - UNHEALTHY -One or more essential containers have failed their health check.
//   - UNKNOWN -The essential containers within the task are still having their
//     health checks evaluated, there are only nonessential containers with health
//     checks defined, or there are no container health checks defined.
//
// If a task is run manually, and not as part of a service, the task will continue
// its lifecycle regardless of its health status. For tasks that are part of a
// service, if the task reports as unhealthy then the task will be stopped and the
// service scheduler will replace it. The following are notes about container
// health check support:
//   - When the Amazon ECS agent cannot connect to the Amazon ECS service, the
//     service reports the container as UNHEALTHY .
//   - The health check statuses are the "last heard from" response from the
//     Amazon ECS agent. There are no assumptions made about the status of the
//     container health checks.
//   - Container health checks require version 1.17.0 or greater of the Amazon ECS
//     container agent. For more information, see Updating the Amazon ECS container
//     agent (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html)
//     .
//   - Container health checks are supported for Fargate tasks if you're using
//     platform version 1.1.0 or greater. For more information, see Fargate platform
//     versions (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/platform_versions.html)
//     .
//   - Container health checks aren't supported for tasks that are part of a
//     service that's configured to use a Classic Load Balancer.
type HealthCheck struct {

	// A string array representing the command that the container runs to determine if
	// it is healthy. The string array must start with CMD to run the command
	// arguments directly, or CMD-SHELL to run the command with the container's
	// default shell. When you use the Amazon Web Services Management Console JSON
	// panel, the Command Line Interface, or the APIs, enclose the list of commands in
	// double quotes and brackets. [ "CMD-SHELL", "curl -f http://localhost/ || exit
	// 1" ] You don't include the double quotes and brackets when you use the Amazon
	// Web Services Management Console. CMD-SHELL, curl -f http://localhost/ || exit 1
	// An exit code of 0 indicates success, and non-zero exit code indicates failure.
	// For more information, see HealthCheck in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/) .
	//
	// This member is required.
	Command []string

	// The time period in seconds between each health check execution. You may specify
	// between 5 and 300 seconds. The default value is 30 seconds.
	Interval *int32

	// The number of times to retry a failed health check before the container is
	// considered unhealthy. You may specify between 1 and 10 retries. The default
	// value is 3.
	Retries *int32

	// The optional grace period to provide containers time to bootstrap before failed
	// health checks count towards the maximum number of retries. You can specify
	// between 0 and 300 seconds. By default, the startPeriod is off. If a health
	// check succeeds within the startPeriod , then the container is considered healthy
	// and any subsequent failures count toward the maximum number of retries.
	StartPeriod *int32

	// The time period in seconds to wait for a health check to succeed before it is
	// considered a failure. You may specify between 2 and 60 seconds. The default
	// value is 5.
	Timeout *int32

	noSmithyDocumentSerde
}

// Hostnames and IP address entries that are added to the /etc/hosts file of a
// container via the extraHosts parameter of its ContainerDefinition .
type HostEntry struct {

	// The hostname to use in the /etc/hosts entry.
	//
	// This member is required.
	Hostname *string

	// The IP address to use in the /etc/hosts entry.
	//
	// This member is required.
	IpAddress *string

	noSmithyDocumentSerde
}

// Details on a container instance bind mount host volume.
type HostVolumeProperties struct {

	// When the host parameter is used, specify a sourcePath to declare the path on
	// the host container instance that's presented to the container. If this parameter
	// is empty, then the Docker daemon has assigned a host path for you. If the host
	// parameter contains a sourcePath file location, then the data volume persists at
	// the specified location on the host container instance until you delete it
	// manually. If the sourcePath value doesn't exist on the host container instance,
	// the Docker daemon creates it. If the location does exist, the contents of the
	// source path folder are exported. If you're using the Fargate launch type, the
	// sourcePath parameter is not supported.
	SourcePath *string

	noSmithyDocumentSerde
}

// Details on an Elastic Inference accelerator. For more information, see Working
// with Amazon Elastic Inference on Amazon ECS (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-inference.html)
// in the Amazon Elastic Container Service Developer Guide.
type InferenceAccelerator struct {

	// The Elastic Inference accelerator device name. The deviceName must also be
	// referenced in a container definition as a ResourceRequirement (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ResourceRequirement.html)
	// .
	//
	// This member is required.
	DeviceName *string

	// The Elastic Inference accelerator type to use.
	//
	// This member is required.
	DeviceType *string

	noSmithyDocumentSerde
}

// Details on an Elastic Inference accelerator task override. This parameter is
// used to override the Elastic Inference accelerator specified in the task
// definition. For more information, see Working with Amazon Elastic Inference on
// Amazon ECS (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-inference.html)
// in the Amazon Elastic Container Service Developer Guide.
type InferenceAcceleratorOverride struct {

	// The Elastic Inference accelerator device name to override for the task. This
	// parameter must match a deviceName specified in the task definition.
	DeviceName *string

	// The Elastic Inference accelerator type to use.
	DeviceType *string

	noSmithyDocumentSerde
}

// An object representing the result of a container instance health status check.
type InstanceHealthCheckResult struct {

	// The Unix timestamp for when the container instance health status last changed.
	LastStatusChange *time.Time

	// The Unix timestamp for when the container instance health status was last
	// updated.
	LastUpdated *time.Time

	// The container instance health status.
	Status InstanceHealthCheckState

	// The type of container instance health status that was verified.
	Type InstanceHealthCheckType

	noSmithyDocumentSerde
}

// The Linux capabilities for the container that are added to or dropped from the
// default configuration provided by Docker. For more information about the default
// capabilities and the non-default available capabilities, see Runtime privilege
// and Linux capabilities (https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities)
// in the Docker run reference. For more detailed information about these Linux
// capabilities, see the capabilities(7) (http://man7.org/linux/man-pages/man7/capabilities.7.html)
// Linux manual page.
type KernelCapabilities struct {

	// The Linux capabilities for the container that have been added to the default
	// configuration provided by Docker. This parameter maps to CapAdd in the Create a
	// container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --cap-add option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . Tasks launched on Fargate only support adding the SYS_PTRACE kernel
	// capability. Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" |
	// "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" |
	// "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" |
	// "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" |
	// "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" |
	// "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" |
	// "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" |
	// "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
	Add []string

	// The Linux capabilities for the container that have been removed from the
	// default configuration provided by Docker. This parameter maps to CapDrop in the
	// Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --cap-drop option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" |
	// "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK"
	// | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" |
	// "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" |
	// "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" |
	// "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" |
	// "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" |
	// "SYSLOG" | "WAKE_ALARM"
	Drop []string

	noSmithyDocumentSerde
}

// A key-value pair object.
type KeyValuePair struct {

	// The name of the key-value pair. For environment variables, this is the name of
	// the environment variable.
	Name *string

	// The value of the key-value pair. For environment variables, this is the value
	// of the environment variable.
	Value *string

	noSmithyDocumentSerde
}

// The Linux-specific options that are applied to the container, such as Linux
// KernelCapabilities (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_KernelCapabilities.html)
// .
type LinuxParameters struct {

	// The Linux capabilities for the container that are added to or dropped from the
	// default configuration provided by Docker. For tasks that use the Fargate launch
	// type, capabilities is supported for all platform versions but the add parameter
	// is only supported if using platform version 1.4.0 or later.
	Capabilities *KernelCapabilities

	// Any host devices to expose to the container. This parameter maps to Devices in
	// the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --device option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . If you're using tasks that use the Fargate launch type, the devices parameter
	// isn't supported.
	Devices []Device

	// Run an init process inside the container that forwards signals and reaps
	// processes. This parameter maps to the --init option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . This parameter requires version 1.25 of the Docker Remote API or greater on
	// your container instance. To check the Docker Remote API version on your
	// container instance, log in to your container instance and run the following
	// command: sudo docker version --format '{{.Server.APIVersion}}'
	InitProcessEnabled *bool

	// The total amount of swap memory (in MiB) a container can use. This parameter
	// will be translated to the --memory-swap option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// where the value would be the sum of the container memory plus the maxSwap
	// value. If a maxSwap value of 0 is specified, the container will not use swap.
	// Accepted values are 0 or any positive integer. If the maxSwap parameter is
	// omitted, the container will use the swap configuration for the container
	// instance it is running on. A maxSwap value must be set for the swappiness
	// parameter to be used. If you're using tasks that use the Fargate launch type,
	// the maxSwap parameter isn't supported. If you're using tasks on Amazon Linux
	// 2023 the swappiness parameter isn't supported.
	MaxSwap *int32

	// The value for the size (in MiB) of the /dev/shm volume. This parameter maps to
	// the --shm-size option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . If you are using tasks that use the Fargate launch type, the sharedMemorySize
	// parameter is not supported.
	SharedMemorySize *int32

	// This allows you to tune a container's memory swappiness behavior. A swappiness
	// value of 0 will cause swapping to not happen unless absolutely necessary. A
	// swappiness value of 100 will cause pages to be swapped very aggressively.
	// Accepted values are whole numbers between 0 and 100 . If the swappiness
	// parameter is not specified, a default value of 60 is used. If a value is not
	// specified for maxSwap then this parameter is ignored. This parameter maps to
	// the --memory-swappiness option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . If you're using tasks that use the Fargate launch type, the swappiness
	// parameter isn't supported. If you're using tasks on Amazon Linux 2023 the
	// swappiness parameter isn't supported.
	Swappiness *int32

	// The container path, mount options, and size (in MiB) of the tmpfs mount. This
	// parameter maps to the --tmpfs option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
	// . If you're using tasks that use the Fargate launch type, the tmpfs parameter
	// isn't supported.
	Tmpfs []Tmpfs

	noSmithyDocumentSerde
}

// The load balancer configuration to use with a service or task set. When you
// add, update, or remove a load balancer configuration, Amazon ECS starts a new
// deployment with the updated Elastic Load Balancing configuration. This causes
// tasks to register to and deregister from load balancers. We recommend that you
// verify this on a test environment before you update the Elastic Load Balancing
// configuration. A service-linked role is required for services that use multiple
// target groups. For more information, see Using service-linked roles (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using-service-linked-roles.html)
// in the Amazon Elastic Container Service Developer Guide.
type LoadBalancer struct {

	// The name of the container (as it appears in a container definition) to
	// associate with the load balancer.
	ContainerName *string

	// The port on the container to associate with the load balancer. This port must
	// correspond to a containerPort in the task definition the tasks in the service
	// are using. For tasks that use the EC2 launch type, the container instance
	// they're launched on must allow ingress traffic on the hostPort of the port
	// mapping.
	ContainerPort *int32

	// The name of the load balancer to associate with the Amazon ECS service or task
	// set. A load balancer name is only specified when using a Classic Load Balancer.
	// If you are using an Application Load Balancer or a Network Load Balancer the
	// load balancer name parameter should be omitted.
	LoadBalancerName *string

	// The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group
	// or groups associated with a service or task set. A target group ARN is only
	// specified when using an Application Load Balancer or Network Load Balancer. If
	// you're using a Classic Load Balancer, omit the target group ARN. For services
	// using the ECS deployment controller, you can specify one or multiple target
	// groups. For more information, see Registering multiple target groups with a
	// service (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/register-multiple-targetgroups.html)
	// in the Amazon Elastic Container Service Developer Guide. For services using the
	// CODE_DEPLOY deployment controller, you're required to define two target groups
	// for the load balancer. For more information, see Blue/green deployment with
	// CodeDeploy (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-type-bluegreen.html)
	// in the Amazon Elastic Container Service Developer Guide. If your service's task
	// definition uses the awsvpc network mode, you must choose ip as the target type,
	// not instance . Do this when creating your target groups because tasks that use
	// the awsvpc network mode are associated with an elastic network interface, not
	// an Amazon EC2 instance. This network mode is required for the Fargate launch
	// type.
	TargetGroupArn *string

	noSmithyDocumentSerde
}

// The log configuration for the container. This parameter maps to LogConfig in
// the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
// and the --log-driver option to docker run (https://docs.docker.com/engine/reference/commandline/run/)
// . By default, containers use the same logging driver that the Docker daemon
// uses. However, the container might use a different logging driver than the
// Docker daemon by specifying a log driver configuration in the container
// definition. For more information about the options for different supported log
// drivers, see Configure logging drivers (https://docs.docker.com/engine/admin/logging/overview/)
// in the Docker documentation. Understand the following when specifying a log
// configuration for your containers.
//   - Amazon ECS currently supports a subset of the logging drivers available to
//     the Docker daemon (shown in the valid values below). Additional log drivers may
//     be available in future releases of the Amazon ECS container agent.
//   - This parameter requires version 1.18 of the Docker Remote API or greater on
//     your container instance.
//   - For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container
//     agent must register the available logging drivers with the
//     ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on
//     that instance can use these log configuration options. For more information, see
//     Amazon ECS container agent configuration (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html)
//     in the Amazon Elastic Container Service Developer Guide.
//   - For tasks that are on Fargate, because you don't have access to the
//     underlying infrastructure your tasks are hosted on, any additional software
//     needed must be installed outside of the task. For example, the Fluentd output
//     aggregators or a remote host running Logstash to send Gelf logs to.
type LogConfiguration struct {

	// The log driver to use for the container. For tasks on Fargate, the supported
	// log drivers are awslogs , splunk , and awsfirelens . For tasks hosted on Amazon
	// EC2 instances, the supported log drivers are awslogs , fluentd , gelf ,
	// json-file , journald , logentries , syslog , splunk , and awsfirelens . For more
	// information about using the awslogs log driver, see Using the awslogs log driver (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_awslogs.html)
	// in the Amazon Elastic Container Service Developer Guide. For more information
	// about using the awsfirelens log driver, see Custom log routing (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_firelens.html)
	// in the Amazon Elastic Container Service Developer Guide. If you have a custom
	// driver that isn't listed, you can fork the Amazon ECS container agent project
	// that's available on GitHub (https://github.com/aws/amazon-ecs-agent) and
	// customize it to work with that driver. We encourage you to submit pull requests
	// for changes that you would like to have included. However, we don't currently
	// provide support for running modified copies of this software.
	//
	// This member is required.
	LogDriver LogDriver

	// The configuration options to send to the log driver. This parameter requires
	// version 1.19 of the Docker Remote API or greater on your container instance. To
	// check the Docker Remote API version on your container instance, log in to your
	// container instance and run the following command: sudo docker version --format
	// '{{.Server.APIVersion}}'
	Options map[string]string

	// The secrets to pass to the log configuration. For more information, see
	// Specifying sensitive data (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/specifying-sensitive-data.html)
	// in the Amazon Elastic Container Service Developer Guide.
	SecretOptions []Secret

	noSmithyDocumentSerde
}

// Details about the managed agent status for the container.
type ManagedAgent struct {

	// The Unix timestamp for the time when the managed agent was last started.
	LastStartedAt *time.Time

	// The last known status of the managed agent.
	LastStatus *string

	// The name of the managed agent. When the execute command feature is turned on,
	// the managed agent name is ExecuteCommandAgent .
	Name ManagedAgentName

	// The reason for why the managed agent is in the state it is in.
	Reason *string

	noSmithyDocumentSerde
}

// An object representing a change in state for a managed agent.
type ManagedAgentStateChange struct {

	// The name of the container that's associated with the managed agent.
	//
	// This member is required.
	ContainerName *string

	// The name of the managed agent.
	//
	// This member is required.
	ManagedAgentName ManagedAgentName

	// The status of the managed agent.
	//
	// This member is required.
	Status *string

	// The reason for the status of the managed agent.
	Reason *string

	noSmithyDocumentSerde
}

// The managed scaling settings for the Auto Scaling group capacity provider. When
// managed scaling is turned on, Amazon ECS manages the scale-in and scale-out
// actions of the Auto Scaling group. Amazon ECS manages a target tracking scaling
// policy using an Amazon ECS managed CloudWatch metric with the specified
// targetCapacity value as the target value for the metric. For more information,
// see Using managed scaling (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/asg-capacity-providers.html#asg-capacity-providers-managed-scaling)
// in the Amazon Elastic Container Service Developer Guide. If managed scaling is
// off, the user must manage the scaling of the Auto Scaling group.
type ManagedScaling struct {

	// The period of time, in seconds, after a newly launched Amazon EC2 instance can
	// contribute to CloudWatch metrics for Auto Scaling group. If this parameter is
	// omitted, the default value of 300 seconds is used.
	InstanceWarmupPeriod *int32

	// The maximum number of Amazon EC2 instances that Amazon ECS will scale out at
	// one time. The scale in process is not affected by this parameter. If this
	// parameter is omitted, the default value of 1 is used.
	MaximumScalingStepSize *int32

	// The minimum number of Amazon EC2 instances that Amazon ECS will scale out at
	// one time. The scale in process is not affected by this parameter If this
	// parameter is omitted, the default value of 1 is used. When additional capacity
	// is required, Amazon ECS will scale up the minimum scaling step size even if the
	// actual demand is less than the minimum scaling step size. If you use a capacity
	// provider with an Auto Scaling group configured with more than one Amazon EC2
	// instance type or Availability Zone, Amazon ECS will scale up by the exact
	// minimum scaling step size value and will ignore both the maximum scaling step
	// size as well as the capacity demand.
	MinimumScalingStepSize *int32

	// Determines whether to use managed scaling for the capacity provider.
	Status ManagedScalingStatus

	// The target capacity utilization as a percentage for the capacity provider. The
	// specified value must be greater than 0 and less than or equal to 100 . For
	// example, if you want the capacity provider to maintain 10% spare capacity, then
	// that means the utilization is 90%, so use a targetCapacity of 90 . The default
	// value of 100 percent results in the Amazon EC2 instances in your Auto Scaling
	// group being completely used.
	TargetCapacity *int32

	noSmithyDocumentSerde
}

// The details for a volume mount point that's used in a container definition.
type MountPoint struct {

	// The path on the container to mount the host volume at.
	ContainerPath *string

	// If this value is true , the container has read-only access to the volume. If
	// this value is false , then the container can write to the volume. The default
	// value is false .
	ReadOnly *bool

	// The name of the volume to mount. Must be a volume name referenced in the name
	// parameter of task definition volume .
	SourceVolume *string

	noSmithyDocumentSerde
}

// Details on the network bindings between a container and its host container
// instance. After a task reaches the RUNNING status, manual and automatic host
// and container port assignments are visible in the networkBindings section of
// DescribeTasks API responses.
type NetworkBinding struct {

	// The IP address that the container is bound to on the container instance.
	BindIP *string

	// The port number on the container that's used with the network binding.
	ContainerPort *int32

	// The port number range on the container that's bound to the dynamically mapped
	// host port range. The following rules apply when you specify a containerPortRange
	// :
	//   - You must use either the bridge network mode or the awsvpc network mode.
	//   - This parameter is available for both the EC2 and Fargate launch types.
	//   - This parameter is available for both the Linux and Windows operating
	//   systems.
	//   - The container instance must have at least version 1.67.0 of the container
	//   agent and at least version 1.67.0-1 of the ecs-init package
	//   - You can specify a maximum of 100 port ranges per container.
	//   - You do not specify a hostPortRange . The value of the hostPortRange is set
	//   as follows:
	//   - For containers in a task with the awsvpc network mode, the hostPort is set
	//   to the same value as the containerPort . This is a static mapping strategy.
	//   - For containers in a task with the bridge network mode, the Amazon ECS agent
	//   finds open host ports from the default ephemeral range and passes it to docker
	//   to bind them to the container ports.
	//   - The containerPortRange valid values are between 1 and 65535.
	//   - A port can only be included in one port mapping per container.
	//   - You cannot specify overlapping port ranges.
	//   - The first port in the range must be less than last port in the range.
	//   - Docker recommends that you turn off the docker-proxy in the Docker daemon
	//   config file when you have a large number of ports. For more information, see
	//   Issue #11185 (https://github.com/moby/moby/issues/11185) on the Github
	//   website. For information about how to turn off the docker-proxy in the Docker
	//   daemon config file, see Docker daemon (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/bootstrap_container_instance.html#bootstrap_docker_daemon)
	//   in the Amazon ECS Developer Guide.
	// You can call DescribeTasks (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeTasks.html)
	// to view the hostPortRange which are the host ports that are bound to the
	// container ports.
	ContainerPortRange *string

	// The port number on the host that's used with the network binding.
	HostPort *int32

	// The port number range on the host that's used with the network binding. This is
	// assigned is assigned by Docker and delivered by the Amazon ECS agent.
	HostPortRange *string

	// The protocol used for the network binding.
	Protocol TransportProtocol

	noSmithyDocumentSerde
}

// The network configuration for a task or service.
type NetworkConfiguration struct {

	// The VPC subnets and security groups that are associated with a task. All
	// specified subnets and security groups must be from the same VPC.
	AwsvpcConfiguration *AwsVpcConfiguration

	noSmithyDocumentSerde
}

// An object representing the elastic network interface for tasks that use the
// awsvpc network mode.
type NetworkInterface struct {

	// The attachment ID for the network interface.
	AttachmentId *string

	// The private IPv6 address for the network interface.
	Ipv6Address *string

	// The private IPv4 address for the network interface.
	PrivateIpv4Address *string

	noSmithyDocumentSerde
}

// An object representing a constraint on task placement. For more information,
// see Task placement constraints (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html)
// in the Amazon Elastic Container Service Developer Guide. If you're using the
// Fargate launch type, task placement constraints aren't supported.
type PlacementConstraint struct {

	// A cluster query language expression to apply to the constraint. The expression
	// can have a maximum length of 2000 characters. You can't specify an expression if
	// the constraint type is distinctInstance . For more information, see Cluster
	// query language (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/cluster-query-language.html)
	// in the Amazon Elastic Container Service Developer Guide.
	Expression *string

	// The type of constraint. Use distinctInstance to ensure that each task in a
	// particular group is running on a different container instance. Use memberOf to
	// restrict the selection to a group of valid candidates.
	Type PlacementConstraintType

	noSmithyDocumentSerde
}

// The task placement strategy for a task or service. For more information, see
// Task placement strategies (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-strategies.html)
// in the Amazon Elastic Container Service Developer Guide.
type PlacementStrategy struct {

	// The field to apply the placement strategy against. For the spread placement
	// strategy, valid values are instanceId (or host , which has the same effect), or
	// any platform or custom attribute that's applied to a container instance, such as
	// attribute:ecs.availability-zone . For the binpack placement strategy, valid
	// values are cpu and memory . For the random placement strategy, this field is
	// not used.
	Field *string

	// The type of placement strategy. The random placement strategy randomly places
	// tasks on available candidates. The spread placement strategy spreads placement
	// across available candidates evenly based on the field parameter. The binpack
	// strategy places tasks on available candidates that have the least available
	// amount of the resource that's specified with the field parameter. For example,
	// if you binpack on memory, a task is placed on the instance with the least amount
	// of remaining memory but still enough to run the task.
	Type PlacementStrategyType

	noSmithyDocumentSerde
}

// The devices that are available on the container instance. The only supported
// device type is a GPU.
type PlatformDevice struct {

	// The ID for the GPUs on the container instance. The available GPU IDs can also
	// be obtained on the container instance in the
	// /var/lib/ecs/gpu/nvidia_gpu_info.json file.
	//
	// This member is required.
	Id *string

	// The type of device that's available on the container instance. The only
	// supported value is GPU .
	//
	// This member is required.
	Type PlatformDeviceType

	noSmithyDocumentSerde
}

// Port mappings allow containers to access ports on the host container instance
// to send or receive traffic. Port mappings are specified as part of the container
// definition. If you use containers in a task with the awsvpc or host network
// mode, specify the exposed ports using containerPort . The hostPort can be left
// blank or it must be the same value as the containerPort . Most fields of this
// parameter ( containerPort , hostPort , protocol ) maps to PortBindings in the
// Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
// and the --publish option to docker run (https://docs.docker.com/engine/reference/commandline/run/)
// . If the network mode of a task definition is set to host , host ports must
// either be undefined or match the container port in the port mapping. You can't
// expose the same container port for multiple protocols. If you attempt this, an
// error is returned. After a task reaches the RUNNING status, manual and
// automatic host and container port assignments are visible in the networkBindings
// section of DescribeTasks API responses.
type PortMapping struct {

	// The application protocol that's used for the port mapping. This parameter only
	// applies to Service Connect. We recommend that you set this parameter to be
	// consistent with the protocol that your application uses. If you set this
	// parameter, Amazon ECS adds protocol-specific connection handling to the Service
	// Connect proxy. If you set this parameter, Amazon ECS adds protocol-specific
	// telemetry in the Amazon ECS console and CloudWatch. If you don't set a value for
	// this parameter, then TCP is used. However, Amazon ECS doesn't add
	// protocol-specific telemetry for TCP. Tasks that run in a namespace can use short
	// names to connect to services in the namespace. Tasks can connect to services
	// across all of the clusters in the namespace. Tasks connect through a managed
	// proxy container that collects logs and metrics for increased visibility. Only
	// the tasks that Amazon ECS services create are supported with Service Connect.
	// For more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
	// in the Amazon Elastic Container Service Developer Guide.
	AppProtocol ApplicationProtocol

	// The port number on the container that's bound to the user-specified or
	// automatically assigned host port. If you use containers in a task with the
	// awsvpc or host network mode, specify the exposed ports using containerPort . If
	// you use containers in a task with the bridge network mode and you specify a
	// container port and not a host port, your container automatically receives a host
	// port in the ephemeral port range. For more information, see hostPort . Port
	// mappings that are automatically assigned in this way do not count toward the 100
	// reserved ports limit of a container instance.
	ContainerPort *int32

	// The port number range on the container that's bound to the dynamically mapped
	// host port range. The following rules apply when you specify a containerPortRange
	// :
	//   - You must use either the bridge network mode or the awsvpc network mode.
	//   - This parameter is available for both the EC2 and Fargate launch types.
	//   - This parameter is available for both the Linux and Windows operating
	//   systems.
	//   - The container instance must have at least version 1.67.0 of the container
	//   agent and at least version 1.67.0-1 of the ecs-init package
	//   - You can specify a maximum of 100 port ranges per container.
	//   - You do not specify a hostPortRange . The value of the hostPortRange is set
	//   as follows:
	//   - For containers in a task with the awsvpc network mode, the hostPort is set
	//   to the same value as the containerPort . This is a static mapping strategy.
	//   - For containers in a task with the bridge network mode, the Amazon ECS agent
	//   finds open host ports from the default ephemeral range and passes it to docker
	//   to bind them to the container ports.
	//   - The containerPortRange valid values are between 1 and 65535.
	//   - A port can only be included in one port mapping per container.
	//   - You cannot specify overlapping port ranges.
	//   - The first port in the range must be less than last port in the range.
	//   - Docker recommends that you turn off the docker-proxy in the Docker daemon
	//   config file when you have a large number of ports. For more information, see
	//   Issue #11185 (https://github.com/moby/moby/issues/11185) on the Github
	//   website. For information about how to turn off the docker-proxy in the Docker
	//   daemon config file, see Docker daemon (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/bootstrap_container_instance.html#bootstrap_docker_daemon)
	//   in the Amazon ECS Developer Guide.
	// You can call DescribeTasks (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeTasks.html)
	// to view the hostPortRange which are the host ports that are bound to the
	// container ports.
	ContainerPortRange *string

	// The port number on the container instance to reserve for your container. If you
	// specify a containerPortRange , leave this field empty and the value of the
	// hostPort is set as follows:
	//   - For containers in a task with the awsvpc network mode, the hostPort is set
	//   to the same value as the containerPort . This is a static mapping strategy.
	//   - For containers in a task with the bridge network mode, the Amazon ECS agent
	//   finds open ports on the host and automatically binds them to the container
	//   ports. This is a dynamic mapping strategy.
	// If you use containers in a task with the awsvpc or host network mode, the
	// hostPort can either be left blank or set to the same value as the containerPort
	// . If you use containers in a task with the bridge network mode, you can specify
	// a non-reserved host port for your container port mapping, or you can omit the
	// hostPort (or set it to 0 ) while specifying a containerPort and your container
	// automatically receives a port in the ephemeral port range for your container
	// instance operating system and Docker version. The default ephemeral port range
	// for Docker version 1.6.0 and later is listed on the instance under
	// /proc/sys/net/ipv4/ip_local_port_range . If this kernel parameter is
	// unavailable, the default ephemeral port range from 49153 through 65535 is used.
	// Do not attempt to specify a host port in the ephemeral port range as these are
	// reserved for automatic assignment. In general, ports below 32768 are outside of
	// the ephemeral port range. The default reserved ports are 22 for SSH, the Docker
	// ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any
	// host port that was previously specified in a running task is also reserved while
	// the task is running. That is, after a task stops, the host port is released. The
	// current reserved ports are displayed in the remainingResources of
	// DescribeContainerInstances (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeContainerInstances.html)
	// output. A container instance can have up to 100 reserved ports at a time. This
	// number includes the default reserved ports. Automatically assigned ports aren't
	// included in the 100 reserved ports quota.
	HostPort *int32

	// The name that's used for the port mapping. This parameter only applies to
	// Service Connect. This parameter is the name that you use in the
	// serviceConnectConfiguration of a service. The name can include up to 64
	// characters. The characters can include lowercase letters, numbers, underscores
	// (_), and hyphens (-). The name can't start with a hyphen. For more information,
	// see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
	// in the Amazon Elastic Container Service Developer Guide.
	Name *string

	// The protocol used for the port mapping. Valid values are tcp and udp . The
	// default is tcp .
	Protocol TransportProtocol

	noSmithyDocumentSerde
}

// An object representing the protection status details for a task. You can set
// the protection status with the UpdateTaskProtection API and get the status of
// tasks with the GetTaskProtection API.
type ProtectedTask struct {

	// The epoch time when protection for the task will expire.
	ExpirationDate *time.Time

	// The protection status of the task. If scale-in protection is on for a task, the
	// value is true . Otherwise, it is false .
	ProtectionEnabled bool

	// The task ARN.
	TaskArn *string

	noSmithyDocumentSerde
}

// The configuration details for the App Mesh proxy. For tasks that use the EC2
// launch type, the container instances require at least version 1.26.0 of the
// container agent and at least version 1.26.0-1 of the ecs-init package to use a
// proxy configuration. If your container instances are launched from the Amazon
// ECS optimized AMI version 20190301 or later, then they contain the required
// versions of the container agent and ecs-init . For more information, see Amazon
// ECS-optimized Linux AMI (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-optimized_AMI.html)
type ProxyConfiguration struct {

	// The name of the container that will serve as the App Mesh proxy.
	//
	// This member is required.
	ContainerName *string

	// The set of network configuration parameters to provide the Container Network
	// Interface (CNI) plugin, specified as key-value pairs.
	//   - IgnoredUID - (Required) The user ID (UID) of the proxy container as defined
	//   by the user parameter in a container definition. This is used to ensure the
	//   proxy ignores its own traffic. If IgnoredGID is specified, this field can be
	//   empty.
	//   - IgnoredGID - (Required) The group ID (GID) of the proxy container as defined
	//   by the user parameter in a container definition. This is used to ensure the
	//   proxy ignores its own traffic. If IgnoredUID is specified, this field can be
	//   empty.
	//   - AppPorts - (Required) The list of ports that the application uses. Network
	//   traffic to these ports is forwarded to the ProxyIngressPort and
	//   ProxyEgressPort .
	//   - ProxyIngressPort - (Required) Specifies the port that incoming traffic to
	//   the AppPorts is directed to.
	//   - ProxyEgressPort - (Required) Specifies the port that outgoing traffic from
	//   the AppPorts is directed to.
	//   - EgressIgnoredPorts - (Required) The egress traffic going to the specified
	//   ports is ignored and not redirected to the ProxyEgressPort . It can be an
	//   empty list.
	//   - EgressIgnoredIPs - (Required) The egress traffic going to the specified IP
	//   addresses is ignored and not redirected to the ProxyEgressPort . It can be an
	//   empty list.
	Properties []KeyValuePair

	// The proxy type. The only supported value is APPMESH .
	Type ProxyConfigurationType

	noSmithyDocumentSerde
}

// The repository credentials for private registry authentication.
type RepositoryCredentials struct {

	// The Amazon Resource Name (ARN) of the secret containing the private repository
	// credentials. When you use the Amazon ECS API, CLI, or Amazon Web Services SDK,
	// if the secret exists in the same Region as the task that you're launching then
	// you can use either the full ARN or the name of the secret. When you use the
	// Amazon Web Services Management Console, you must specify the full ARN of the
	// secret.
	//
	// This member is required.
	CredentialsParameter *string

	noSmithyDocumentSerde
}

// Describes the resources available for a container instance.
type Resource struct {

	// When the doubleValue type is set, the value of the resource must be a double
	// precision floating-point type.
	DoubleValue float64

	// When the integerValue type is set, the value of the resource must be an integer.
	IntegerValue int32

	// When the longValue type is set, the value of the resource must be an extended
	// precision floating-point type.
	LongValue int64

	// The name of the resource, such as CPU , MEMORY , PORTS , PORTS_UDP , or a
	// user-defined resource.
	Name *string

	// When the stringSetValue type is set, the value of the resource must be a string
	// type.
	StringSetValue []string

	// The type of the resource. Valid values: INTEGER , DOUBLE , LONG , or STRINGSET .
	Type *string

	noSmithyDocumentSerde
}

// The type and amount of a resource to assign to a container. The supported
// resource types are GPUs and Elastic Inference accelerators. For more
// information, see Working with GPUs on Amazon ECS (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-gpu.html)
// or Working with Amazon Elastic Inference on Amazon ECS (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-inference.html)
// in the Amazon Elastic Container Service Developer Guide
type ResourceRequirement struct {

	// The type of resource to assign to a container. The supported values are GPU or
	// InferenceAccelerator .
	//
	// This member is required.
	Type ResourceType

	// The value for the specified resource type. If the GPU type is used, the value
	// is the number of physical GPUs the Amazon ECS container agent reserves for the
	// container. The number of GPUs that's reserved for all containers in a task can't
	// exceed the number of available GPUs on the container instance that the task is
	// launched on. If the InferenceAccelerator type is used, the value matches the
	// deviceName for an InferenceAccelerator (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_InferenceAccelerator.html)
	// specified in a task definition.
	//
	// This member is required.
	Value *string

	noSmithyDocumentSerde
}

// Information about the platform for the Amazon ECS service or task. For more
// information about RuntimePlatform , see RuntimePlatform (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_definition_parameters.html#runtime-platform)
// in the Amazon Elastic Container Service Developer Guide.
type RuntimePlatform struct {

	// The CPU architecture. You can run your Linux tasks on an ARM-based platform by
	// setting the value to ARM64 . This option is available for tasks that run on
	// Linux Amazon EC2 instance or Linux containers on Fargate.
	CpuArchitecture CPUArchitecture

	// The operating system.
	OperatingSystemFamily OSFamily

	noSmithyDocumentSerde
}

// A floating-point percentage of the desired number of tasks to place and keep
// running in the task set.
type Scale struct {

	// The unit of measure for the scale value.
	Unit ScaleUnit

	// The value, specified as a percent total of a service's desiredCount , to scale
	// the task set. Accepted values are numbers between 0 and 100.
	Value float64

	noSmithyDocumentSerde
}

// An object representing the secret to expose to your container. Secrets can be
// exposed to a container in the following ways:
//   - To inject sensitive data into your containers as environment variables, use
//     the secrets container definition parameter.
//   - To reference sensitive information in the log configuration of a container,
//     use the secretOptions container definition parameter.
//
// For more information, see Specifying sensitive data (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/specifying-sensitive-data.html)
// in the Amazon Elastic Container Service Developer Guide.
type Secret struct {

	// The name of the secret.
	//
	// This member is required.
	Name *string

	// The secret to expose to the container. The supported values are either the full
	// ARN of the Secrets Manager secret or the full ARN of the parameter in the SSM
	// Parameter Store. For information about the require Identity and Access
	// Management permissions, see Required IAM permissions for Amazon ECS secrets (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/specifying-sensitive-data-secrets.html#secrets-iam)
	// (for Secrets Manager) or Required IAM permissions for Amazon ECS secrets (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/specifying-sensitive-data-parameters.html)
	// (for Systems Manager Parameter store) in the Amazon Elastic Container Service
	// Developer Guide. If the SSM Parameter Store parameter exists in the same Region
	// as the task you're launching, then you can use either the full ARN or name of
	// the parameter. If the parameter exists in a different Region, then the full ARN
	// must be specified.
	//
	// This member is required.
	ValueFrom *string

	noSmithyDocumentSerde
}

// Details on a service within a cluster.
type Service struct {

	// The capacity provider strategy the service uses. When using the
	// DescribeServices API, this field is omitted if the service was created using a
	// launch type.
	CapacityProviderStrategy []CapacityProviderStrategyItem

	// The Amazon Resource Name (ARN) of the cluster that hosts the service.
	ClusterArn *string

	// The Unix timestamp for the time when the service was created.
	CreatedAt *time.Time

	// The principal that created the service.
	CreatedBy *string

	// Optional deployment parameters that control how many tasks run during the
	// deployment and the ordering of stopping and starting tasks.
	DeploymentConfiguration *DeploymentConfiguration

	// The deployment controller type the service is using.
	DeploymentController *DeploymentController

	// The current state of deployments for the service.
	Deployments []Deployment

	// The desired number of instantiations of the task definition to keep running on
	// the service. This value is specified when the service is created with
	// CreateService , and it can be modified with UpdateService .
	DesiredCount int32

	// Determines whether to use Amazon ECS managed tags for the tasks in the service.
	// For more information, see Tagging Your Amazon ECS Resources (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-using-tags.html)
	// in the Amazon Elastic Container Service Developer Guide.
	EnableECSManagedTags bool

	// Determines whether the execute command functionality is turned on for the
	// service. If true , the execute command functionality is turned on for all
	// containers in tasks as part of the service.
	EnableExecuteCommand bool

	// The event stream for your service. A maximum of 100 of the latest events are
	// displayed.
	Events []ServiceEvent

	// The period of time, in seconds, that the Amazon ECS service scheduler ignores
	// unhealthy Elastic Load Balancing target health checks after a task has first
	// started.
	HealthCheckGracePeriodSeconds *int32

	// The launch type the service is using. When using the DescribeServices API, this
	// field is omitted if the service was created using a capacity provider strategy.
	LaunchType LaunchType

	// A list of Elastic Load Balancing load balancer objects. It contains the load
	// balancer name, the container name, and the container port to access from the
	// load balancer. The container name is as it appears in a container definition.
	LoadBalancers []LoadBalancer

	// The VPC subnet and security group configuration for tasks that receive their
	// own elastic network interface by using the awsvpc networking mode.
	NetworkConfiguration *NetworkConfiguration

	// The number of tasks in the cluster that are in the PENDING state.
	PendingCount int32

	// The placement constraints for the tasks in the service.
	PlacementConstraints []PlacementConstraint

	// The placement strategy that determines how tasks for the service are placed.
	PlacementStrategy []PlacementStrategy

	// The operating system that your tasks in the service run on. A platform family
	// is specified only for tasks using the Fargate launch type. All tasks that run as
	// part of this service must use the same platformFamily value as the service (for
	// example, LINUX ).
	PlatformFamily *string

	// The platform version to run your service on. A platform version is only
	// specified for tasks that are hosted on Fargate. If one isn't specified, the
	// LATEST platform version is used. For more information, see Fargate Platform
	// Versions (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/platform_versions.html)
	// in the Amazon Elastic Container Service Developer Guide.
	PlatformVersion *string

	// Determines whether to propagate the tags from the task definition or the
	// service to the task. If no value is specified, the tags aren't propagated.
	PropagateTags PropagateTags

	// The ARN of the IAM role that's associated with the service. It allows the
	// Amazon ECS container agent to register container instances with an Elastic Load
	// Balancing load balancer.
	RoleArn *string

	// The number of tasks in the cluster that are in the RUNNING state.
	RunningCount int32

	// The scheduling strategy to use for the service. For more information, see
	// Services (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs_services.html)
	// . There are two service scheduler strategies available.
	//   - REPLICA -The replica scheduling strategy places and maintains the desired
	//   number of tasks across your cluster. By default, the service scheduler spreads
	//   tasks across Availability Zones. You can use task placement strategies and
	//   constraints to customize task placement decisions.
	//   - DAEMON -The daemon scheduling strategy deploys exactly one task on each
	//   active container instance. This task meets all of the task placement constraints
	//   that you specify in your cluster. The service scheduler also evaluates the task
	//   placement constraints for running tasks. It stop tasks that don't meet the
	//   placement constraints. Fargate tasks don't support the DAEMON scheduling
	//   strategy.
	SchedulingStrategy SchedulingStrategy

	// The ARN that identifies the service. For more information about the ARN format,
	// see Amazon Resource Name (ARN) (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#ecs-resource-ids)
	// in the Amazon ECS Developer Guide.
	ServiceArn *string

	// The name of your service. Up to 255 letters (uppercase and lowercase), numbers,
	// underscores, and hyphens are allowed. Service names must be unique within a
	// cluster. However, you can have similarly named services in multiple clusters
	// within a Region or across multiple Regions.
	ServiceName *string

	// The details for the service discovery registries to assign to this service. For
	// more information, see Service Discovery (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-discovery.html)
	// .
	ServiceRegistries []ServiceRegistry

	// The status of the service. The valid values are ACTIVE , DRAINING , or INACTIVE .
	Status *string

	// The metadata that you apply to the service to help you categorize and organize
	// them. Each tag consists of a key and an optional value. You define bot the key
	// and value. The following basic restrictions apply to tags:
	//   - Maximum number of tags per resource - 50
	//   - For each resource, each tag key must be unique, and each tag key can have
	//   only one value.
	//   - Maximum key length - 128 Unicode characters in UTF-8
	//   - Maximum value length - 256 Unicode characters in UTF-8
	//   - If your tagging schema is used across multiple services and resources,
	//   remember that other services may have restrictions on allowed characters.
	//   Generally allowed characters are: letters, numbers, and spaces representable in
	//   UTF-8, and the following characters: + - = . _ : / @.
	//   - Tag keys and values are case-sensitive.
	//   - Do not use aws: , AWS: , or any upper or lowercase combination of such as a
	//   prefix for either keys or values as it is reserved for Amazon Web Services use.
	//   You cannot edit or delete tag keys or values with this prefix. Tags with this
	//   prefix do not count against your tags per resource limit.
	Tags []Tag

	// The task definition to use for tasks in the service. This value is specified
	// when the service is created with CreateService , and it can be modified with
	// UpdateService .
	TaskDefinition *string

	// Information about a set of Amazon ECS tasks in either an CodeDeploy or an
	// EXTERNAL deployment. An Amazon ECS task set includes details such as the desired
	// number of tasks, how many tasks are running, and whether the task set serves
	// production traffic.
	TaskSets []TaskSet

	noSmithyDocumentSerde
}

// Each alias ("endpoint") is a fully-qualified name and port number that other
// tasks ("clients") can use to connect to this service. Each name and port mapping
// must be unique within the namespace. Tasks that run in a namespace can use short
// names to connect to services in the namespace. Tasks can connect to services
// across all of the clusters in the namespace. Tasks connect through a managed
// proxy container that collects logs and metrics for increased visibility. Only
// the tasks that Amazon ECS services create are supported with Service Connect.
// For more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
// in the Amazon Elastic Container Service Developer Guide.
type ServiceConnectClientAlias struct {

	// The listening port number for the Service Connect proxy. This port is available
	// inside of all of the tasks within the same namespace. To avoid changing your
	// applications in client Amazon ECS services, set this to the same port that the
	// client application uses by default. For more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
	// in the Amazon Elastic Container Service Developer Guide.
	//
	// This member is required.
	Port *int32

	// The dnsName is the name that you use in the applications of client tasks to
	// connect to this service. The name must be a valid DNS name but doesn't need to
	// be fully-qualified. The name can include up to 127 characters. The name can
	// include lowercase letters, numbers, underscores (_), hyphens (-), and periods
	// (.). The name can't start with a hyphen. If this parameter isn't specified, the
	// default value of discoveryName.namespace is used. If the discoveryName isn't
	// specified, the port mapping name from the task definition is used in
	// portName.namespace . To avoid changing your applications in client Amazon ECS
	// services, set this to the same name that the client application uses by default.
	// For example, a few common names are database , db , or the lowercase name of a
	// database, such as mysql or redis . For more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
	// in the Amazon Elastic Container Service Developer Guide.
	DnsName *string

	noSmithyDocumentSerde
}

// The Service Connect configuration of your Amazon ECS service. The configuration
// for this service to discover and connect to services, and be discovered by, and
// connected from, other services within a namespace. Tasks that run in a namespace
// can use short names to connect to services in the namespace. Tasks can connect
// to services across all of the clusters in the namespace. Tasks connect through a
// managed proxy container that collects logs and metrics for increased visibility.
// Only the tasks that Amazon ECS services create are supported with Service
// Connect. For more information, see Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
// in the Amazon Elastic Container Service Developer Guide.
type ServiceConnectConfiguration struct {

	// Specifies whether to use Service Connect with this service.
	//
	// This member is required.
	Enabled bool

	// The log configuration for the container. This parameter maps to LogConfig in
	// the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
	// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
	// and the --log-driver option to docker run (https://docs.docker.com/engine/reference/commandline/run/)
	// . By default, containers use the same logging driver that the Docker daemon
	// uses. However, the container might use a different logging driver than the
	// Docker daemon by specifying a log driver configuration in the container
	// definition. For more information about the options for different supported log
	// drivers, see Configure logging drivers (https://docs.docker.com/engine/admin/logging/overview/)
	// in the Docker documentation. Understand the following when specifying a log
	// configuration for your containers.
	//   - Amazon ECS currently supports a subset of the logging drivers available to
	//   the Docker daemon (shown in the valid values below). Additional log drivers may
	//   be available in future releases of the Amazon ECS container agent.
	//   - This parameter requires version 1.18 of the Docker Remote API or greater on
	//   your container instance.
	//   - For tasks that are hosted on Amazon EC2 instances, the Amazon ECS container
	//   agent must register the available logging drivers with the
	//   ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on
	//   that instance can use these log configuration options. For more information, see
	//   Amazon ECS container agent configuration (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html)
	//   in the Amazon Elastic Container Service Developer Guide.
	//   - For tasks that are on Fargate, because you don't have access to the
	//   underlying infrastructure your tasks are hosted on, any additional software
	//   needed must be installed outside of the task. For example, the Fluentd output
	//   aggregators or a remote host running Logstash to send Gelf logs to.
	LogConfiguration *LogConfiguration

	// The namespace name or full Amazon Resource Name (ARN) of the Cloud Map
	// namespace for use with Service Connect. The namespace must be in the same Amazon
	// Web Services Region as the Amazon ECS service and cluster. The type of namespace
	// doesn't affect Service Connect. For more information about Cloud Map, see
	// Working with Services (https://docs.aws.amazon.com/cloud-map/latest/dg/working-with-services.html)
	// in the Cloud Map Developer Guide.
	Namespace *string

	// The list of Service Connect service objects. These are names and aliases (also
	// known as endpoints) that are used by other Amazon ECS services to connect to
	// this service. This field is not required for a "client" Amazon ECS service
	// that's a member of a namespace only to connect to other services within the
	// namespace. An example of this would be a frontend application that accepts
	// incoming requests from either a load balancer that's attached to the service or
	// by other means. An object selects a port from the task definition, assigns a
	// name for the Cloud Map service, and a list of aliases (endpoints) and ports for
	// client applications to refer to this service.
	Services []ServiceConnectService

	noSmithyDocumentSerde
}

// The Service Connect service object configuration. For more information, see
// Service Connect (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-connect.html)
// in the Amazon Elastic Container Service Developer Guide.
type ServiceConnectService struct {

	// The portName must match the name of one of the portMappings from all the
	// containers in the task definition of this Amazon ECS service.
	//
	// This member is required.
	PortName *string

	// The list of client aliases for this Service Connect service. You use these to
	// assign names that can be used by client applications. The maximum number of
	// client aliases that you can have in this list is 1. Each alias ("endpoint") is a
	// fully-qualified name and port number that other Amazon ECS tasks ("clients") can
	// use to connect to this service. Each name and port mapping must be unique within
	// the namespace. For each ServiceConnectService , you must provide at least one
	// clientAlias with one port .
	ClientAliases []ServiceConnectClientAlias

	// The discoveryName is the name of the new Cloud Map service that Amazon ECS
	// creates for this Amazon ECS service. This must be unique within the Cloud Map
	// namespace. The name can contain up to 64 characters. The name can include
	// lowercase letters, numbers, underscores (_), and hyphens (-). The name can't
	// start with a hyphen. If the discoveryName isn't specified, the port mapping
	// name from the task definition is used in portName.namespace .
	DiscoveryName *string

	// The port number for the Service Connect proxy to listen on. Use the value of
	// this field to bypass the proxy for traffic on the port number specified in the
	// named portMapping in the task definition of this application, and then use it
	// in your VPC security groups to allow traffic into the proxy for this Amazon ECS
	// service. In awsvpc mode and Fargate, the default value is the container port
	// number. The container port number is in the portMapping in the task definition.
	// In bridge mode, the default value is the ephemeral port of the Service Connect
	// proxy.
	IngressPortOverride *int32

	noSmithyDocumentSerde
}

// The Service Connect resource. Each configuration maps a discovery name to a
// Cloud Map service name. The data is stored in Cloud Map as part of the Service
// Connect configuration for each discovery name of this Amazon ECS service. A task
// can resolve the dnsName for each of the clientAliases of a service. However a
// task can't resolve the discovery names. If you want to connect to a service,
// refer to the ServiceConnectConfiguration of that service for the list of
// clientAliases that you can use.
type ServiceConnectServiceResource struct {

	// The Amazon Resource Name (ARN) for the namespace in Cloud Map that matches the
	// discovery name for this Service Connect resource. You can use this ARN in other
	// integrations with Cloud Map. However, Service Connect can't ensure connectivity
	// outside of Amazon ECS.
	DiscoveryArn *string

	// The discovery name of this Service Connect resource. The discoveryName is the
	// name of the new Cloud Map service that Amazon ECS creates for this Amazon ECS
	// service. This must be unique within the Cloud Map namespace. The name can
	// contain up to 64 characters. The name can include lowercase letters, numbers,
	// underscores (_), and hyphens (-). The name can't start with a hyphen. If the
	// discoveryName isn't specified, the port mapping name from the task definition is
	// used in portName.namespace .
	DiscoveryName *string

	noSmithyDocumentSerde
}

// The details for an event that's associated with a service.
type ServiceEvent struct {

	// The Unix timestamp for the time when the event was triggered.
	CreatedAt *time.Time

	// The ID string for the event.
	Id *string

	// The event message.
	Message *string

	noSmithyDocumentSerde
}

// The details for the service registry. Each service may be associated with one
// service registry. Multiple service registries for each service are not
// supported. When you add, update, or remove the service registries configuration,
// Amazon ECS starts a new deployment. New tasks are registered and deregistered to
// the updated service registry configuration.
type ServiceRegistry struct {

	// The container name value to be used for your service discovery service. It's
	// already specified in the task definition. If the task definition that your
	// service task specifies uses the bridge or host network mode, you must specify a
	// containerName and containerPort combination from the task definition. If the
	// task definition that your service task specifies uses the awsvpc network mode
	// and a type SRV DNS record is used, you must specify either a containerName and
	// containerPort combination or a port value. However, you can't specify both.
	ContainerName *string

	// The port value to be used for your service discovery service. It's already
	// specified in the task definition. If the task definition your service task
	// specifies uses the bridge or host network mode, you must specify a containerName
	// and containerPort combination from the task definition. If the task definition
	// your service task specifies uses the awsvpc network mode and a type SRV DNS
	// record is used, you must specify either a containerName and containerPort
	// combination or a port value. However, you can't specify both.
	ContainerPort *int32

	// The port value used if your service discovery service specified an SRV record.
	// This field might be used if both the awsvpc network mode and SRV records are
	// used.
	Port *int32

	// The Amazon Resource Name (ARN) of the service registry. The currently supported
	// service registry is Cloud Map. For more information, see CreateService (https://docs.aws.amazon.com/cloud-map/latest/api/API_CreateService.html)
	// .
	RegistryArn *string

	noSmithyDocumentSerde
}

// The details for the execute command session.
type Session struct {

	// The ID of the execute command session.
	SessionId *string

	// A URL to the managed agent on the container that the SSM Session Manager client
	// uses to send commands and receive output from the container.
	StreamUrl *string

	// An encrypted token value containing session and caller information. It's used
	// to authenticate the connection to the container.
	TokenValue *string

	noSmithyDocumentSerde
}

// The current account setting for a resource.
type Setting struct {

	// The Amazon ECS resource name.
	Name SettingName

	// The ARN of the principal. It can be a user, role, or the root user. If this
	// field is omitted, the authenticated user is assumed.
	PrincipalArn *string

	// Determines whether the account setting is on or off for the specified resource.
	Value *string

	noSmithyDocumentSerde
}

// A list of namespaced kernel parameters to set in the container. This parameter
// maps to Sysctls in the Create a container (https://docs.docker.com/engine/api/v1.35/#operation/ContainerCreate)
// section of the Docker Remote API (https://docs.docker.com/engine/api/v1.35/)
// and the --sysctl option to docker run (https://docs.docker.com/engine/reference/run/#security-configuration)
// . We don't recommend that you specify network-related systemControls parameters
// for multiple containers in a single task. This task also uses either the awsvpc
// or host network mode. It does it for the following reasons.
//   - For tasks that use the awsvpc network mode, if you set systemControls for
//     any container, it applies to all containers in the task. If you set different
//     systemControls for multiple containers in a single task, the container that's
//     started last determines which systemControls take effect.
//   - For tasks that use the host network mode, the systemControls parameter
//     applies to the container instance's kernel parameter and that of all containers
//     of any tasks running on that container instance.
type SystemControl struct {

	// The namespaced kernel parameter to set a value for.
	Namespace *string

	// The value for the namespaced kernel parameter that's specified in namespace .
	Value *string

	noSmithyDocumentSerde
}

// The metadata that you apply to a resource to help you categorize and organize
// them. Each tag consists of a key and an optional value. You define them. The
// following basic restrictions apply to tags:
//   - Maximum number of tags per resource - 50
//   - For each resource, each tag key must be unique, and each tag key can have
//     only one value.
//   - Maximum key length - 128 Unicode characters in UTF-8
//   - Maximum value length - 256 Unicode characters in UTF-8
//   - If your tagging schema is used across multiple services and resources,
//     remember that other services may have restrictions on allowed characters.
//     Generally allowed characters are: letters, numbers, and spaces representable in
//     UTF-8, and the following characters: + - = . _ : / @.
//   - Tag keys and values are case-sensitive.
//   - Do not use aws: , AWS: , or any upper or lowercase combination of such as a
//     prefix for either keys or values as it is reserved for Amazon Web Services use.
//     You cannot edit or delete tag keys or values with this prefix. Tags with this
//     prefix do not count against your tags per resource limit.
type Tag struct {

	// One part of a key-value pair that make up a tag. A key is a general label that
	// acts like a category for more specific tag values.
	Key *string

	// The optional part of a key-value pair that make up a tag. A value acts as a
	// descriptor within a tag category (key).
	Value *string

	noSmithyDocumentSerde
}

// Details on a task in a cluster.
type Task struct {

	// The Elastic Network Adapter that's associated with the task if the task uses
	// the awsvpc network mode.
	Attachments []Attachment

	// The attributes of the task
	Attributes []Attribute

	// The Availability Zone for the task.
	AvailabilityZone *string

	// The capacity provider that's associated with the task.
	CapacityProviderName *string

	// The ARN of the cluster that hosts the task.
	ClusterArn *string

	// The connectivity status of a task.
	Connectivity Connectivity

	// The Unix timestamp for the time when the task last went into CONNECTED status.
	ConnectivityAt *time.Time

	// The ARN of the container instances that host the task.
	ContainerInstanceArn *string

	// The containers that's associated with the task.
	Containers []Container

	// The number of CPU units used by the task as expressed in a task definition. It
	// can be expressed as an integer using CPU units (for example, 1024 ). It can also
	// be expressed as a string using vCPUs (for example, 1 vCPU or 1 vcpu ). String
	// values are converted to an integer that indicates the CPU units when the task
	// definition is registered. If you use the EC2 launch type, this field is
	// optional. Supported values are between 128 CPU units ( 0.125 vCPUs) and 10240
	// CPU units ( 10 vCPUs). If you use the Fargate launch type, this field is
	// required. You must use one of the following values. These values determine the
	// range of supported values for the memory parameter: The CPU units cannot be
	// less than 1 vCPU when you use Windows containers on Fargate.
	//   - 256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2
	//   GB)
	//   - 512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3
	//   GB), 4096 (4 GB)
	//   - 1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4
	//   GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
	//   - 2048 (2 vCPU) - Available memory values: 4096 (4 GB) and 16384 (16 GB) in
	//   increments of 1024 (1 GB)
	//   - 4096 (4 vCPU) - Available memory values: 8192 (8 GB) and 30720 (30 GB) in
	//   increments of 1024 (1 GB)
	//   - 8192 (8 vCPU) - Available memory values: 16 GB and 60 GB in 4 GB increments
	//   This option requires Linux platform 1.4.0 or later.
	//   - 16384 (16vCPU) - Available memory values: 32GB and 120 GB in 8 GB increments
	//   This option requires Linux platform 1.4.0 or later.
	Cpu *string

	// The Unix timestamp for the time when the task was created. More specifically,
	// it's for the time when the task entered the PENDING state.
	CreatedAt *time.Time

	// The desired status of the task. For more information, see Task Lifecycle (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-lifecycle.html)
	// .
	DesiredStatus *string

	// Determines whether execute command functionality is turned on for this task. If
	// true , execute command functionality is turned on all the containers in the task.
	EnableExecuteCommand bool

	// The ephemeral storage settings for the task.
	EphemeralStorage *EphemeralStorage

	// The Unix timestamp for the time when the task execution stopped.
	ExecutionStoppedAt *time.Time

	// The name of the task group that's associated with the task.
	Group *string

	// The health status for the task. It's determined by the health of the essential
	// containers in the task. If all essential containers in the task are reporting as
	// HEALTHY , the task status also reports as HEALTHY . If any essential containers
	// in the task are reporting as UNHEALTHY or UNKNOWN , the task status also reports
	// as UNHEALTHY or UNKNOWN . The Amazon ECS container agent doesn't monitor or
	// report on Docker health checks that are embedded in a container image and not
	// specified in the container definition. For example, this includes those
	// specified in a parent image or from the image's Dockerfile. Health check
	// parameters that are specified in a container definition override any Docker
	// health checks that are found in the container image.
	HealthStatus HealthStatus

	// The Elastic Inference accelerator that's associated with the task.
	InferenceAccelerators []InferenceAccelerator

	// The last known status for the task. For more information, see Task Lifecycle (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-lifecycle.html)
	// .
	LastStatus *string

	// The infrastructure where your task runs on. For more information, see Amazon
	// ECS launch types (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/launch_types.html)
	// in the Amazon Elastic Container Service Developer Guide.
	LaunchType LaunchType

	// The amount of memory (in MiB) that the task uses as expressed in a task
	// definition. It can be expressed as an integer using MiB (for example, 1024 ). If
	// it's expressed as a string using GB (for example, 1GB or 1 GB ), it's converted
	// to an integer indicating the MiB when the task definition is registered. If you
	// use the EC2 launch type, this field is optional. If you use the Fargate launch
	// type, this field is required. You must use one of the following values. The
	// value that you choose determines the range of supported values for the cpu
	// parameter.
	//   - 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25
	//   vCPU)
	//   - 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values:
	//   512 (.5 vCPU)
	//   - 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7
	//   GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
	//   - Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) -
	//   Available cpu values: 2048 (2 vCPU)
	//   - Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) -
	//   Available cpu values: 4096 (4 vCPU)
	//   - Between 16 GB and 60 GB in 4 GB increments - Available cpu values: 8192 (8
	//   vCPU) This option requires Linux platform 1.4.0 or later.
	//   - Between 32GB and 120 GB in 8 GB increments - Available cpu values: 16384 (16
	//   vCPU) This option requires Linux platform 1.4.0 or later.
	Memory *string

	// One or more container overrides.
	Overrides *TaskOverride

	// The operating system that your tasks are running on. A platform family is
	// specified only for tasks that use the Fargate launch type. All tasks that run as
	// part of this service must use the same platformFamily value as the service (for
	// example, LINUX. ).
	PlatformFamily *string

	// The platform version where your task runs on. A platform version is only
	// specified for tasks that use the Fargate launch type. If you didn't specify one,
	// the LATEST platform version is used. For more information, see Fargate Platform
	// Versions (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/platform_versions.html)
	// in the Amazon Elastic Container Service Developer Guide.
	PlatformVersion *string

	// The Unix timestamp for the time when the container image pull began.
	PullStartedAt *time.Time

	// The Unix timestamp for the time when the container image pull completed.
	PullStoppedAt *time.Time

	// The Unix timestamp for the time when the task started. More specifically, it's
	// for the time when the task transitioned from the PENDING state to the RUNNING
	// state.
	StartedAt *time.Time

	// The tag specified when a task is started. If an Amazon ECS service started the
	// task, the startedBy parameter contains the deployment ID of that service.
	StartedBy *string

	// The stop code indicating why a task was stopped. The stoppedReason might
	// contain additional details. The following are valid values:
	//   - TaskFailedToStart
	//   - EssentialContainerExited
	//   - UserInitiated
	//   - TerminationNotice
	//   - ServiceSchedulerInitiated
	//   - SpotInterruption
	StopCode TaskStopCode

	// The Unix timestamp for the time when the task was stopped. More specifically,
	// it's for the time when the task transitioned from the RUNNING state to the
	// STOPPED state.
	StoppedAt *time.Time

	// The reason that the task was stopped.
	StoppedReason *string

	// The Unix timestamp for the time when the task stops. More specifically, it's
	// for the time when the task transitions from the RUNNING state to STOPPED .
	StoppingAt *time.Time

	// The metadata that you apply to the task to help you categorize and organize the
	// task. Each tag consists of a key and an optional value. You define both the key
	// and value. The following basic restrictions apply to tags:
	//   - Maximum number of tags per resource - 50
	//   - For each resource, each tag key must be unique, and each tag key can have
	//   only one value.
	//   - Maximum key length - 128 Unicode characters in UTF-8
	//   - Maximum value length - 256 Unicode characters in UTF-8
	//   - If your tagging schema is used across multiple services and resources,
	//   remember that other services may have restrictions on allowed characters.
	//   Generally allowed characters are: letters, numbers, and spaces representable in
	//   UTF-8, and the following characters: + - = . _ : / @.
	//   - Tag keys and values are case-sensitive.
	//   - Do not use aws: , AWS: , or any upper or lowercase combination of such as a
	//   prefix for either keys or values as it is reserved for Amazon Web Services use.
	//   You cannot edit or delete tag keys or values with this prefix. Tags with this
	//   prefix do not count against your tags per resource limit.
	Tags []Tag

	// The Amazon Resource Name (ARN) of the task.
	TaskArn *string

	// The ARN of the task definition that creates the task.
	TaskDefinitionArn *string

	// The version counter for the task. Every time a task experiences a change that
	// starts a CloudWatch event, the version counter is incremented. If you replicate
	// your Amazon ECS task state with CloudWatch Events, you can compare the version
	// of a task reported by the Amazon ECS API actions with the version reported in
	// CloudWatch Events for the task (inside the detail object) to verify that the
	// version in your event stream is current.
	Version int64

	noSmithyDocumentSerde
}

// The details of a task definition which describes the container and volume
// definitions of an Amazon Elastic Container Service task. You can specify which
// Docker images to use, the required resources, and other configurations related
// to launching the task definition through an Amazon ECS service or task.
type TaskDefinition struct {

	// The task launch types the task definition validated against during task
	// definition registration. For more information, see Amazon ECS launch types (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/launch_types.html)
	// in the Amazon Elastic Container Service Developer Guide.
	Compatibilities []Compatibility

	// A list of container definitions in JSON format that describe the different
	// containers that make up your task. For more information about container
	// definition parameters and defaults, see Amazon ECS Task Definitions (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html)
	// in the Amazon Elastic Container Service Developer Guide.
	ContainerDefinitions []ContainerDefinition

	// The number of cpu units used by the task. If you use the EC2 launch type, this
	// field is optional. Any value can be used. If you use the Fargate launch type,
	// this field is required. You must use one of the following values. The value that
	// you choose determines your range of valid values for the memory parameter. The
	// CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.
	//
	//   - 256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2
	//   GB)
	//   - 512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3
	//   GB), 4096 (4 GB)
	//   - 1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4
	//   GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
	//   - 2048 (2 vCPU) - Available memory values: 4096 (4 GB) and 16384 (16 GB) in
	//   increments of 1024 (1 GB)
	//   - 4096 (4 vCPU) - Available memory values: 8192 (8 GB) and 30720 (30 GB) in
	//   increments of 1024 (1 GB)
	//   - 8192 (8 vCPU) - Available memory values: 16 GB and 60 GB in 4 GB increments
	//   This option requires Linux platform 1.4.0 or later.
	//   - 16384 (16vCPU) - Available memory values: 32GB and 120 GB in 8 GB increments
	//   This option requires Linux platform 1.4.0 or later.
	Cpu *string

	// The Unix timestamp for the time when the task definition was deregistered.
	DeregisteredAt *time.Time

	// The ephemeral storage settings to use for tasks run with the task definition.
	EphemeralStorage *EphemeralStorage

	// The Amazon Resource Name (ARN) of the task execution role that grants the
	// Amazon ECS container agent permission to make Amazon Web Services API calls on
	// your behalf. The task execution IAM role is required depending on the
	// requirements of your task. For more information, see Amazon ECS task execution
	// IAM role (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_execution_IAM_role.html)
	// in the Amazon Elastic Container Service Developer Guide.
	ExecutionRoleArn *string

	// The name of a family that this task definition is registered to. Up to 255
	// characters are allowed. Letters (both uppercase and lowercase letters), numbers,
	// hyphens (-), and underscores (_) are allowed. A family groups multiple versions
	// of a task definition. Amazon ECS gives the first task definition that you
	// registered to a family a revision number of 1. Amazon ECS gives sequential
	// revision numbers to each task definition that you add.
	Family *string

	// The Elastic Inference accelerator that's associated with the task.
	InferenceAccelerators []InferenceAccelerator

	// The IPC resource namespace to use for the containers in the task. The valid
	// values are host , task , or none . If host is specified, then all containers
	// within the tasks that specified the host IPC mode on the same container
	// instance share the same IPC resources with the host Amazon EC2 instance. If task
	// is specified, all containers within the specified task share the same IPC
	// resources. If none is specified, then IPC resources within the containers of a
	// task are private and not shared with other containers in a task or on the
	// container instance. If no value is specified, then the IPC resource namespace
	// sharing depends on the Docker daemon setting on the container instance. For more
	// information, see IPC settings (https://docs.docker.com/engine/reference/run/#ipc-settings---ipc)
	// in the Docker run reference. If the host IPC mode is used, be aware that there
	// is a heightened risk of undesired IPC namespace expose. For more information,
	// see Docker security (https://docs.docker.com/engine/security/security/) . If you
	// are setting namespaced kernel parameters using systemControls for the
	// containers in the task, the following will apply to your IPC resource namespace.
	// For more information, see System Controls (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_definition_parameters.html)
	// in the Amazon Elastic Container Service Developer Guide.
	//   - For tasks that use the host IPC mode, IPC namespace related systemControls
	//   are not supported.
	//   - For tasks that use the task IPC mode, IPC namespace related systemControls
	//   will apply to all containers within a task.
	// This parameter is not supported for Windows containers or tasks run on Fargate.
	IpcMode IpcMode

	// The amount (in MiB) of memory used by the task. If your tasks runs on Amazon
	// EC2 instances, you must specify either a task-level memory value or a
	// container-level memory value. This field is optional and any value can be used.
	// If a task-level memory value is specified, the container-level memory value is
	// optional. For more information regarding container-level memory and memory
	// reservation, see ContainerDefinition (https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ContainerDefinition.html)
	// . If your tasks runs on Fargate, this field is required. You must use one of the
	// following values. The value you choose determines your range of valid values for
	// the cpu parameter.
	//   - 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25
	//   vCPU)
	//   - 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values:
	//   512 (.5 vCPU)
	//   - 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7
	//   GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
	//   - Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) -
	//   Available cpu values: 2048 (2 vCPU)
	//   - Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) -
	//   Available cpu values: 4096 (4 vCPU)
	//   - Between 16 GB and 60 GB in 4 GB increments - Available cpu values: 8192 (8
	//   vCPU) This option requires Linux platform 1.4.0 or later.
	//   - Between 32GB and 120 GB in 8 GB increments - Available cpu values: 16384 (16
	//   vCPU) This option requires Linux platform 1.4.0 or later.
	Memory *string

	// The Docker networking mode to use for the containers in the task. The valid
	// values are none , bridge , awsvpc , and host . If no network mode is specified,
	// the default is bridge . For Amazon ECS tasks on Fargate, the awsvpc network
	// mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any
	// network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances,
	// or awsvpc can be used. If the network mode is set to none , you cannot specify
	// port mappings in your container definitions, and the tasks containers do not
	// have external connectivity. The host and awsvpc network modes offer the highest
	// networking performance for containers because they use the EC2 network stack
	// instead of the virtualized network stack provided by the bridge mode. With the
	// host and awsvpc network modes, exposed container ports are mapped directly to
	// the corresponding host port (for the host network mode) or the attached elastic
	// network interface port (for the awsvpc network mode), so you cannot take
	// advantage of dynamic host port mappings. When using the host network mode, you
	// should not run containers using the root user (UID 0). It is considered best
	// practice to use a non-root user. If the network mode is awsvpc , the task is
	// allocated an elastic network interface, and you must specify a
	// NetworkConfiguration value when you create a service or run a task with the task
	// definition. For more information, see Task Networking (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html)
	// in the Amazon Elastic Container Service Developer Guide. If the network mode is
	// host , you cannot run multiple instantiations of the same task on a single
	// container instance when port mappings are used. For more information, see
	// Network settings (https://docs.docker.com/engine/reference/run/#network-settings)
	// in the Docker run reference.
	NetworkMode NetworkMode

	// The process namespace to use for the containers in the task. The valid values
	// are host or task . If host is specified, then all containers within the tasks
	// that specified the host PID mode on the same container instance share the same
	// process namespace with the host Amazon EC2 instance. If task is specified, all
	// containers within the specified task share the same process namespace. If no
	// value is specified, the default is a private namespace. For more information,
	// see PID settings (https://docs.docker.com/engine/reference/run/#pid-settings---pid)
	// in the Docker run reference. If the host PID mode is used, be aware that there
	// is a heightened risk of undesired process namespace expose. For more
	// information, see Docker security (https://docs.docker.com/engine/security/security/)
	// . This parameter is not supported for Windows containers or tasks run on
	// Fargate.
	PidMode PidMode

	// An array of placement constraint objects to use for tasks. This parameter isn't
	// supported for tasks run on Fargate.
	PlacementConstraints []TaskDefinitionPlacementConstraint

	// The configuration details for the App Mesh proxy. Your Amazon ECS container
	// instances require at least version 1.26.0 of the container agent and at least
	// version 1.26.0-1 of the ecs-init package to use a proxy configuration. If your
	// container instances are launched from the Amazon ECS optimized AMI version
	// 20190301 or later, they contain the required versions of the container agent and
	// ecs-init . For more information, see Amazon ECS-optimized Linux AMI (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-optimized_AMI.html)
	// in the Amazon Elastic Container Service Developer Guide.
	ProxyConfiguration *ProxyConfiguration

	// The Unix timestamp for the time when the task definition was registered.
	RegisteredAt *time.Time

	// The principal that registered the task definition.
	RegisteredBy *string

	// The container instance attributes required by your task. When an Amazon EC2
	// instance is registered to your cluster, the Amazon ECS container agent assigns
	// some standard attributes to the instance. You can apply custom attributes. These
	// are specified as key-value pairs using the Amazon ECS console or the
	// PutAttributes API. These attributes are used when determining task placement for
	// tasks hosted on Amazon EC2 instances. For more information, see Attributes (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html#attributes)
	// in the Amazon Elastic Container Service Developer Guide. This parameter isn't
	// supported for tasks run on Fargate.
	RequiresAttributes []Attribute

	// The task launch types the task definition was validated against. For more
	// information, see Amazon ECS launch types (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/launch_types.html)
	// in the Amazon Elastic Container Service Developer Guide.
	RequiresCompatibilities []Compatibility

	// The revision of the task in a particular family. The revision is a version
	// number of a task definition in a family. When you register a task definition for
	// the first time, the revision is 1 . Each time that you register a new revision
	// of a task definition in the same family, the revision value always increases by
	// one. This is even if you deregistered previous revisions in this family.
	Revision int32

	// The operating system that your task definitions are running on. A platform
	// family is specified only for tasks using the Fargate launch type. When you
	// specify a task in a service, this value must match the runtimePlatform value of
	// the service.
	RuntimePlatform *RuntimePlatform

	// The status of the task definition.
	Status TaskDefinitionStatus

	// The full Amazon Resource Name (ARN) of the task definition.
	TaskDefinitionArn *string

	// The short name or full Amazon Resource Name (ARN) of the Identity and Access
	// Management role that grants containers in the task permission to call Amazon Web
	// Services APIs on your behalf. For more information, see Amazon ECS Task Role (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html)
	// in the Amazon Elastic Container Service Developer Guide. IAM roles for tasks on
	// Windows require that the -EnableTaskIAMRole option is set when you launch the
	// Amazon ECS-optimized Windows AMI. Your containers must also run some
	// configuration code to use the feature. For more information, see Windows IAM
	// roles for tasks (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/windows_task_IAM_roles.html)
	// in the Amazon Elastic Container Service Developer Guide.
	TaskRoleArn *string

	// The list of data volume definitions for the task. For more information, see
	// Using data volumes in tasks (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_data_volumes.html)
	// in the Amazon Elastic Container Service Developer Guide. The host and sourcePath
	// parameters aren't supported for tasks run on Fargate.
	Volumes []Volume

	noSmithyDocumentSerde
}

// The constraint on task placement in the task definition. For more information,
// see Task placement constraints (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html)
// in the Amazon Elastic Container Service Developer Guide. Task placement
// constraints aren't supported for tasks run on Fargate.
type TaskDefinitionPlacementConstraint struct {

	// A cluster query language expression to apply to the constraint. For more
	// information, see Cluster query language (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/cluster-query-language.html)
	// in the Amazon Elastic Container Service Developer Guide.
	Expression *string

	// The type of constraint. The MemberOf constraint restricts selection to be from
	// a group of valid candidates.
	Type TaskDefinitionPlacementConstraintType

	noSmithyDocumentSerde
}

// The overrides that are associated with a task.
type TaskOverride struct {

	// One or more container overrides that are sent to a task.
	ContainerOverrides []ContainerOverride

	// The CPU override for the task.
	Cpu *string

	// The ephemeral storage setting override for the task. This parameter is only
	// supported for tasks hosted on Fargate that use the following platform versions:
	//   - Linux platform version 1.4.0 or later.
	//   - Windows platform version 1.0.0 or later.
	EphemeralStorage *EphemeralStorage

	// The Amazon Resource Name (ARN) of the task execution role override for the
	// task. For more information, see Amazon ECS task execution IAM role (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_execution_IAM_role.html)
	// in the Amazon Elastic Container Service Developer Guide.
	ExecutionRoleArn *string

	// The Elastic Inference accelerator override for the task.
	InferenceAcceleratorOverrides []InferenceAcceleratorOverride

	// The memory override for the task.
	Memory *string

	// The Amazon Resource Name (ARN) of the role that containers in this task can
	// assume. All containers in this task are granted the permissions that are
	// specified in this role. For more information, see IAM Role for Tasks (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html)
	// in the Amazon Elastic Container Service Developer Guide.
	TaskRoleArn *string

	noSmithyDocumentSerde
}

// Information about a set of Amazon ECS tasks in either an CodeDeploy or an
// EXTERNAL deployment. An Amazon ECS task set includes details such as the desired
// number of tasks, how many tasks are running, and whether the task set serves
// production traffic.
type TaskSet struct {

	// The capacity provider strategy that are associated with the task set.
	CapacityProviderStrategy []CapacityProviderStrategyItem

	// The Amazon Resource Name (ARN) of the cluster that the service that hosts the
	// task set exists in.
	ClusterArn *string

	// The computed desired count for the task set. This is calculated by multiplying
	// the service's desiredCount by the task set's scale percentage. The result is
	// always rounded up. For example, if the computed desired count is 1.2, it rounds
	// up to 2 tasks.
	ComputedDesiredCount int32

	// The Unix timestamp for the time when the task set was created.
	CreatedAt *time.Time

	// The external ID associated with the task set. If an CodeDeploy deployment
	// created a task set, the externalId parameter contains the CodeDeploy deployment
	// ID. If a task set is created for an external deployment and is associated with a
	// service discovery registry, the externalId parameter contains the
	// ECS_TASK_SET_EXTERNAL_ID Cloud Map attribute.
	ExternalId *string

	// The ID of the task set.
	Id *string

	// The launch type the tasks in the task set are using. For more information, see
	// Amazon ECS launch types (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/launch_types.html)
	// in the Amazon Elastic Container Service Developer Guide.
	LaunchType LaunchType

	// Details on a load balancer that are used with a task set.
	LoadBalancers []LoadBalancer

	// The network configuration for the task set.
	NetworkConfiguration *NetworkConfiguration

	// The number of tasks in the task set that are in the PENDING status during a
	// deployment. A task in the PENDING state is preparing to enter the RUNNING
	// state. A task set enters the PENDING status when it launches for the first time
	// or when it's restarted after being in the STOPPED state.
	PendingCount int32

	// The operating system that your tasks in the set are running on. A platform
	// family is specified only for tasks that use the Fargate launch type. All tasks
	// in the set must have the same value.
	PlatformFamily *string

	// The Fargate platform version where the tasks in the task set are running. A
	// platform version is only specified for tasks run on Fargate. For more
	// information, see Fargate platform versions (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/platform_versions.html)
	// in the Amazon Elastic Container Service Developer Guide.
	PlatformVersion *string

	// The number of tasks in the task set that are in the RUNNING status during a
	// deployment. A task in the RUNNING state is running and ready for use.
	RunningCount int32

	// A floating-point percentage of your desired number of tasks to place and keep
	// running in the task set.
	Scale *Scale

	// The Amazon Resource Name (ARN) of the service the task set exists in.
	ServiceArn *string

	// The details for the service discovery registries to assign to this task set.
	// For more information, see Service discovery (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-discovery.html)
	// .
	ServiceRegistries []ServiceRegistry

	// The stability status. This indicates whether the task set has reached a steady
	// state. If the following conditions are met, the task set are in STEADY_STATE :
	//   - The task runningCount is equal to the computedDesiredCount .
	//   - The pendingCount is 0 .
	//   - There are no tasks that are running on container instances in the DRAINING
	//   status.
	//   - All tasks are reporting a healthy status from the load balancers, service
	//   discovery, and container health checks.
	// If any of those conditions aren't met, the stability status returns STABILIZING .
	StabilityStatus StabilityStatus

	// The Unix timestamp for the time when the task set stability status was
	// retrieved.
	StabilityStatusAt *time.Time

	// The tag specified when a task set is started. If an CodeDeploy deployment
	// created the task set, the startedBy parameter is CODE_DEPLOY . If an external
	// deployment created the task set, the startedBy field isn't used.
	StartedBy *string

	// The status of the task set. The following describes each state. PRIMARY The
	// task set is serving production traffic. ACTIVE The task set isn't serving
	// production traffic. DRAINING The tasks in the task set are being stopped, and
	// their corresponding targets are being deregistered from their target group.
	Status *string

	// The metadata that you apply to the task set to help you categorize and organize
	// them. Each tag consists of a key and an optional value. You define both. The
	// following basic restrictions apply to tags:
	//   - Maximum number of tags per resource - 50
	//   - For each resource, each tag key must be unique, and each tag key can have
	//   only one value.
	//   - Maximum key length - 128 Unicode characters in UTF-8
	//   - Maximum value length - 256 Unicode characters in UTF-8
	//   - If your tagging schema is used across multiple services and resources,
	//   remember that other services may have restrictions on allowed characters.
	//   Generally allowed characters are: letters, numbers, and spaces representable in
	//   UTF-8, and the following characters: + - = . _ : / @.
	//   - Tag keys and values are case-sensitive.
	//   - Do not use aws: , AWS: , or any upper or lowercase combination of such as a
	//   prefix for either keys or values as it is reserved for Amazon Web Services use.
	//   You cannot edit or delete tag keys or values with this prefix. Tags with this
	//   prefix do not count against your tags per resource limit.
	Tags []Tag

	// The task definition that the task set is using.
	TaskDefinition *string

	// The Amazon Resource Name (ARN) of the task set.
	TaskSetArn *string

	// The Unix timestamp for the time when the task set was last updated.
	UpdatedAt *time.Time

	noSmithyDocumentSerde
}

// The container path, mount options, and size of the tmpfs mount.
type Tmpfs struct {

	// The absolute file path where the tmpfs volume is to be mounted.
	//
	// This member is required.
	ContainerPath *string

	// The maximum size (in MiB) of the tmpfs volume.
	//
	// This member is required.
	Size int32

	// The list of tmpfs volume mount options. Valid values: "defaults" | "ro" | "rw"
	// | "suid" | "nosuid" | "dev" | "nodev" | "exec" | "noexec" | "sync" | "async" |
	// "dirsync" | "remount" | "mand" | "nomand" | "atime" | "noatime" | "diratime" |
	// "nodiratime" | "bind" | "rbind" | "unbindable" | "runbindable" | "private" |
	// "rprivate" | "shared" | "rshared" | "slave" | "rslave" | "relatime" |
	// "norelatime" | "strictatime" | "nostrictatime" | "mode" | "uid" | "gid" |
	// "nr_inodes" | "nr_blocks" | "mpol"
	MountOptions []string

	noSmithyDocumentSerde
}

// The ulimit settings to pass to the container. Amazon ECS tasks hosted on
// Fargate use the default resource limit values set by the operating system with
// the exception of the nofile resource limit parameter which Fargate overrides.
// The nofile resource limit sets a restriction on the number of open files that a
// container can use. The default nofile soft limit is 1024 and the default hard
// limit is 4096 . You can specify the ulimit settings for a container in a task
// definition.
type Ulimit struct {

	// The hard limit for the ulimit type.
	//
	// This member is required.
	HardLimit int32

	// The type of the ulimit .
	//
	// This member is required.
	Name UlimitName

	// The soft limit for the ulimit type.
	//
	// This member is required.
	SoftLimit int32

	noSmithyDocumentSerde
}

// The Docker and Amazon ECS container agent version information about a container
// instance.
type VersionInfo struct {

	// The Git commit hash for the Amazon ECS container agent build on the
	// amazon-ecs-agent  (https://github.com/aws/amazon-ecs-agent/commits/master)
	// GitHub repository.
	AgentHash *string

	// The version number of the Amazon ECS container agent.
	AgentVersion *string

	// The Docker version that's running on the container instance.
	DockerVersion *string

	noSmithyDocumentSerde
}

// A data volume that's used in a task definition. For tasks that use the Amazon
// Elastic File System (Amazon EFS), specify an efsVolumeConfiguration . For
// Windows tasks that use Amazon FSx for Windows File Server file system, specify a
// fsxWindowsFileServerVolumeConfiguration . For tasks that use a Docker volume,
// specify a DockerVolumeConfiguration . For tasks that use a bind mount host
// volume, specify a host and optional sourcePath . For more information, see
// Using Data Volumes in Tasks (https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_data_volumes.html)
// .
type Volume struct {

	// This parameter is specified when you use Docker volumes. Windows containers
	// only support the use of the local driver. To use bind mounts, specify the host
	// parameter instead. Docker volumes aren't supported by tasks run on Fargate.
	DockerVolumeConfiguration *DockerVolumeConfiguration

	// This parameter is specified when you use an Amazon Elastic File System file
	// system for task storage.
	EfsVolumeConfiguration *EFSVolumeConfiguration

	// This parameter is specified when you use Amazon FSx for Windows File Server
	// file system for task storage.
	FsxWindowsFileServerVolumeConfiguration *FSxWindowsFileServerVolumeConfiguration

	// This parameter is specified when you use bind mount host volumes. The contents
	// of the host parameter determine whether your bind mount host volume persists on
	// the host container instance and where it's stored. If the host parameter is
	// empty, then the Docker daemon assigns a host path for your data volume. However,
	// the data isn't guaranteed to persist after the containers that are associated
	// with it stop running. Windows containers can mount whole directories on the same
	// drive as $env:ProgramData . Windows containers can't mount directories on a
	// different drive, and mount point can't be across drives. For example, you can
	// mount C:\my\path:C:\my\path and D:\:D:\ , but not D:\my\path:C:\my\path or
	// D:\:C:\my\path .
	Host *HostVolumeProperties

	// The name of the volume. Up to 255 letters (uppercase and lowercase), numbers,
	// underscores, and hyphens are allowed. This name is referenced in the
	// sourceVolume parameter of container definition mountPoints .
	Name *string

	noSmithyDocumentSerde
}

// Details on a data volume from another container in the same task definition.
type VolumeFrom struct {

	// If this value is true , the container has read-only access to the volume. If
	// this value is false , then the container can write to the volume. The default
	// value is false .
	ReadOnly *bool

	// The name of another container within the same task definition to mount volumes
	// from.
	SourceContainer *string

	noSmithyDocumentSerde
}

type noSmithyDocumentSerde = smithydocument.NoSerde