// Code generated by smithy-go-codegen DO NOT EDIT.

package ses

import (
	"context"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/aws/signer/v4"
	"github.com/aws/aws-sdk-go-v2/service/ses/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Composes an email message and immediately queues it for sending. In order to
// send email using the SendEmail operation, your message must meet the following
// requirements:
//   - The message must be sent from a verified email address or domain. If you
//     attempt to send email using a non-verified address or domain, the operation will
//     result in an "Email address not verified" error.
//   - If your account is still in the Amazon SES sandbox, you may only send to
//     verified addresses or domains, or to email addresses associated with the Amazon
//     SES Mailbox Simulator. For more information, see Verifying Email Addresses
//     and Domains (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html)
//     in the Amazon SES Developer Guide.
//   - The maximum message size is 10 MB.
//   - The message must include at least one recipient email address. The
//     recipient address can be a To: address, a CC: address, or a BCC: address. If a
//     recipient email address is invalid (that is, it is not in the format
//     UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be
//     rejected, even if the message contains other recipients that are valid.
//   - The message may not include more than 50 recipients, across the To:, CC:
//     and BCC: fields. If you need to send an email message to a larger audience, you
//     can divide your recipient list into groups of 50 or fewer, and then call the
//     SendEmail operation several times to send the message to each group.
//
// For every message that you send, the total number of recipients (including each
// recipient in the To:, CC: and BCC: fields) is counted against the maximum number
// of emails you can send in a 24-hour period (your sending quota). For more
// information about sending quotas in Amazon SES, see Managing Your Amazon SES
// Sending Limits (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/manage-sending-limits.html)
// in the Amazon SES Developer Guide.
func (c *Client) SendEmail(ctx context.Context, params *SendEmailInput, optFns ...func(*Options)) (*SendEmailOutput, error) {
	if params == nil {
		params = &SendEmailInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "SendEmail", params, optFns, c.addOperationSendEmailMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*SendEmailOutput)
	out.ResultMetadata = metadata
	return out, nil
}

// Represents a request to send a single formatted email using Amazon SES. For
// more information, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-formatted.html)
// .
type SendEmailInput struct {

	// The destination for this email, composed of To:, CC:, and BCC: fields.
	//
	// This member is required.
	Destination *types.Destination

	// The message to be sent.
	//
	// This member is required.
	Message *types.Message

	// The email address that is sending the email. This email address must be either
	// individually verified with Amazon SES, or from a domain that has been verified
	// with Amazon SES. For information about verifying identities, see the Amazon SES
	// Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html)
	// . If you are sending on behalf of another user and have been permitted to do so
	// by a sending authorization policy, then you must also specify the SourceArn
	// parameter. For more information about sending authorization, see the Amazon SES
	// Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html)
	// . Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531 (https://tools.ietf.org/html/rfc6531)
	// . For this reason, the local part of a source email address (the part of the
	// email address that precedes the @ sign) may only contain 7-bit ASCII characters (https://en.wikipedia.org/wiki/Email_address#Local-part)
	// . If the domain part of an address (the part after the @ sign) contains
	// non-ASCII characters, they must be encoded using Punycode, as described in
	// RFC3492 (https://tools.ietf.org/html/rfc3492.html) . The sender name (also known
	// as the friendly name) may contain non-ASCII characters. These characters must be
	// encoded using MIME encoded-word syntax, as described in RFC 2047 (https://tools.ietf.org/html/rfc2047)
	// . MIME encoded-word syntax uses the following form:
	// =?charset?encoding?encoded-text?= .
	//
	// This member is required.
	Source *string

	// The name of the configuration set to use when you send an email using SendEmail .
	ConfigurationSetName *string

	// The reply-to email address(es) for the message. If the recipient replies to the
	// message, each reply-to address will receive the reply.
	ReplyToAddresses []string

	// The email address that bounces and complaints will be forwarded to when
	// feedback forwarding is enabled. If the message cannot be delivered to the
	// recipient, then an error message will be returned from the recipient's ISP; this
	// message will then be forwarded to the email address specified by the ReturnPath
	// parameter. The ReturnPath parameter is never overwritten. This email address
	// must be either individually verified with Amazon SES, or from a domain that has
	// been verified with Amazon SES.
	ReturnPath *string

	// This parameter is used only for sending authorization. It is the ARN of the
	// identity that is associated with the sending authorization policy that permits
	// you to use the email address specified in the ReturnPath parameter. For
	// example, if the owner of example.com (which has ARN
	// arn:aws:ses:us-east-1:123456789012:identity/example.com ) attaches a policy to
	// it that authorizes you to use feedback@example.com , then you would specify the
	// ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com ,
	// and the ReturnPath to be feedback@example.com . For more information about
	// sending authorization, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html)
	// .
	ReturnPathArn *string

	// This parameter is used only for sending authorization. It is the ARN of the
	// identity that is associated with the sending authorization policy that permits
	// you to send for the email address specified in the Source parameter. For
	// example, if the owner of example.com (which has ARN
	// arn:aws:ses:us-east-1:123456789012:identity/example.com ) attaches a policy to
	// it that authorizes you to send from user@example.com , then you would specify
	// the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com ,
	// and the Source to be user@example.com . For more information about sending
	// authorization, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html)
	// .
	SourceArn *string

	// A list of tags, in the form of name/value pairs, to apply to an email that you
	// send using SendEmail . Tags correspond to characteristics of the email that you
	// define, so that you can publish email sending events.
	Tags []types.MessageTag

	noSmithyDocumentSerde
}

// Represents a unique message ID.
type SendEmailOutput struct {

	// The unique message identifier returned from the SendEmail action.
	//
	// This member is required.
	MessageId *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationSendEmailMiddlewares(stack *middleware.Stack, options Options) (err error) {
	err = stack.Serialize.Add(&awsAwsquery_serializeOpSendEmail{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsAwsquery_deserializeOpSendEmail{}, middleware.After)
	if err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddClientRequestIDMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddComputeContentLengthMiddleware(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = v4.AddComputePayloadSHA256Middleware(stack); err != nil {
		return err
	}
	if err = addRetryMiddlewares(stack, options); err != nil {
		return err
	}
	if err = addHTTPSignerV4Middleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = awsmiddleware.AddRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addOpSendEmailValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opSendEmail(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = awsmiddleware.AddRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opSendEmail(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		SigningName:   "ses",
		OperationName: "SendEmail",
	}
}