// Code generated by smithy-go-codegen DO NOT EDIT.

package transfer

import (
	"context"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/aws/signer/v4"
	"github.com/aws/aws-sdk-go-v2/service/transfer/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Updates the file transfer protocol-enabled server's properties after that
// server has been created. The UpdateServer call returns the ServerId of the
// server you updated.
func (c *Client) UpdateServer(ctx context.Context, params *UpdateServerInput, optFns ...func(*Options)) (*UpdateServerOutput, error) {
	if params == nil {
		params = &UpdateServerInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "UpdateServer", params, optFns, c.addOperationUpdateServerMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*UpdateServerOutput)
	out.ResultMetadata = metadata
	return out, nil
}

type UpdateServerInput struct {

	// A system-assigned unique identifier for a server instance that the Transfer
	// Family user is assigned to.
	//
	// This member is required.
	ServerId *string

	// The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate Manager
	// (ACM) certificate. Required when Protocols is set to FTPS . To request a new
	// public certificate, see Request a public certificate (https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-public.html)
	// in the Amazon Web ServicesCertificate Manager User Guide. To import an existing
	// certificate into ACM, see Importing certificates into ACM (https://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html)
	// in the Amazon Web ServicesCertificate Manager User Guide. To request a private
	// certificate to use FTPS through private IP addresses, see Request a private
	// certificate (https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-private.html)
	// in the Amazon Web ServicesCertificate Manager User Guide. Certificates with the
	// following cryptographic algorithms and key sizes are supported:
	//   - 2048-bit RSA (RSA_2048)
	//   - 4096-bit RSA (RSA_4096)
	//   - Elliptic Prime Curve 256 bit (EC_prime256v1)
	//   - Elliptic Prime Curve 384 bit (EC_secp384r1)
	//   - Elliptic Prime Curve 521 bit (EC_secp521r1)
	// The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN
	// or IP address specified and information about the issuer.
	Certificate *string

	// The virtual private cloud (VPC) endpoint settings that are configured for your
	// server. When you host your endpoint within your VPC, you can make your endpoint
	// accessible only to resources within your VPC, or you can attach Elastic IP
	// addresses and make your endpoint accessible to clients over the internet. Your
	// VPC's default security groups are automatically assigned to your endpoint.
	EndpointDetails *types.EndpointDetails

	// The type of endpoint that you want your server to use. You can choose to make
	// your server's endpoint publicly accessible (PUBLIC) or host it inside your VPC.
	// With an endpoint that is hosted in a VPC, you can restrict access to your server
	// and resources only within your VPC or choose to make it internet facing by
	// attaching Elastic IP addresses directly to it. After May 19, 2021, you won't be
	// able to create a server using EndpointType=VPC_ENDPOINT in your Amazon Web
	// Servicesaccount if your account hasn't already done so before May 19, 2021. If
	// you have already created servers with EndpointType=VPC_ENDPOINT in your Amazon
	// Web Servicesaccount on or before May 19, 2021, you will not be affected. After
	// this date, use EndpointType = VPC . For more information, see
	// https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.
	// It is recommended that you use VPC as the EndpointType . With this endpoint
	// type, you have the option to directly associate up to three Elastic IPv4
	// addresses (BYO IP included) with your server's endpoint and use VPC security
	// groups to restrict traffic by the client's public IP address. This is not
	// possible with EndpointType set to VPC_ENDPOINT .
	EndpointType types.EndpointType

	// The RSA, ECDSA, or ED25519 private key to use for your SFTP-enabled server. You
	// can add multiple host keys, in case you want to rotate keys, or have a set of
	// active keys that use different algorithms. Use the following command to generate
	// an RSA 2048 bit key with no passphrase: ssh-keygen -t rsa -b 2048 -N "" -m PEM
	// -f my-new-server-key . Use a minimum value of 2048 for the -b option. You can
	// create a stronger key by using 3072 or 4096. Use the following command to
	// generate an ECDSA 256 bit key with no passphrase: ssh-keygen -t ecdsa -b 256 -N
	// "" -m PEM -f my-new-server-key . Valid values for the -b option for ECDSA are
	// 256, 384, and 521. Use the following command to generate an ED25519 key with no
	// passphrase: ssh-keygen -t ed25519 -N "" -f my-new-server-key . For all of these
	// commands, you can replace my-new-server-key with a string of your choice. If you
	// aren't planning to migrate existing users from an existing SFTP-enabled server
	// to a new server, don't update the host key. Accidentally changing a server's
	// host key can be disruptive. For more information, see Manage host keys for your
	// SFTP-enabled server (https://docs.aws.amazon.com/transfer/latest/userguide/edit-server-config.html#configuring-servers-change-host-key)
	// in the Transfer Family User Guide.
	HostKey *string

	// An array containing all of the information required to call a customer's
	// authentication API method.
	IdentityProviderDetails *types.IdentityProviderDetails

	// The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role
	// that allows a server to turn on Amazon CloudWatch logging for Amazon S3 or
	// Amazon EFSevents. When set, you can view user activity in your CloudWatch logs.
	LoggingRole *string

	// Specifies a string to display when users connect to a server. This string is
	// displayed after the user authenticates. The SFTP protocol does not support
	// post-authentication display banners.
	PostAuthenticationLoginBanner *string

	// Specifies a string to display when users connect to a server. This string is
	// displayed before the user authenticates. For example, the following banner
	// displays details about using the system: This system is for the use of
	// authorized users only. Individuals using this computer system without authority,
	// or in excess of their authority, are subject to having all of their activities
	// on this system monitored and recorded by system personnel.
	PreAuthenticationLoginBanner *string

	// The protocol settings that are configured for your server.
	//   - To indicate passive mode (for FTP and FTPS protocols), use the PassiveIp
	//   parameter. Enter a single dotted-quad IPv4 address, such as the external IP
	//   address of a firewall, router, or load balancer.
	//   - To ignore the error that is generated when the client attempts to use the
	//   SETSTAT command on a file that you are uploading to an Amazon S3 bucket, use
	//   the SetStatOption parameter. To have the Transfer Family server ignore the
	//   SETSTAT command and upload files without needing to make any changes to your
	//   SFTP client, set the value to ENABLE_NO_OP . If you set the SetStatOption
	//   parameter to ENABLE_NO_OP , Transfer Family generates a log entry to Amazon
	//   CloudWatch Logs, so that you can determine when the client is making a SETSTAT
	//   call.
	//   - To determine whether your Transfer Family server resumes recent, negotiated
	//   sessions through a unique session ID, use the TlsSessionResumptionMode
	//   parameter.
	//   - As2Transports indicates the transport method for the AS2 messages.
	//   Currently, only HTTP is supported.
	ProtocolDetails *types.ProtocolDetails

	// Specifies the file transfer protocol or protocols over which your file transfer
	// protocol client can connect to your server's endpoint. The available protocols
	// are:
	//   - SFTP (Secure Shell (SSH) File Transfer Protocol): File transfer over SSH
	//   - FTPS (File Transfer Protocol Secure): File transfer with TLS encryption
	//   - FTP (File Transfer Protocol): Unencrypted file transfer
	//   - AS2 (Applicability Statement 2): used for transporting structured
	//   business-to-business data
	//
	//   - If you select FTPS , you must choose a certificate stored in Certificate
	//   Manager (ACM) which is used to identify your server when clients connect to it
	//   over FTPS.
	//   - If Protocol includes either FTP or FTPS , then the EndpointType must be VPC
	//   and the IdentityProviderType must be either AWS_DIRECTORY_SERVICE , AWS_LAMBDA
	//   , or API_GATEWAY .
	//   - If Protocol includes FTP , then AddressAllocationIds cannot be associated.
	//   - If Protocol is set only to SFTP , the EndpointType can be set to PUBLIC and
	//   the IdentityProviderType can be set any of the supported identity types:
	//   SERVICE_MANAGED , AWS_DIRECTORY_SERVICE , AWS_LAMBDA , or API_GATEWAY .
	//   - If Protocol includes AS2 , then the EndpointType must be VPC , and domain
	//   must be Amazon S3.
	Protocols []types.Protocol

	// Specifies the name of the security policy that is attached to the server.
	SecurityPolicyName *string

	// Specifies the log groups to which your server logs are sent. To specify a log
	// group, you must provide the ARN for an existing log group. In this case, the
	// format of the log group is as follows:
	// arn:aws:logs:region-name:amazon-account-id:log-group:log-group-name:* For
	// example, arn:aws:logs:us-east-1:111122223333:log-group:mytestgroup:* If you
	// have previously specified a log group for a server, you can clear it, and in
	// effect turn off structured logging, by providing an empty value for this
	// parameter in an update-server call. For example: update-server --server-id
	// s-1234567890abcdef0 --structured-log-destinations
	StructuredLogDestinations []string

	// Specifies the workflow ID for the workflow to assign and the execution role
	// that's used for executing the workflow. In addition to a workflow to execute
	// when a file is uploaded completely, WorkflowDetails can also contain a workflow
	// ID (and execution role) for a workflow to execute on partial upload. A partial
	// upload occurs when the server session disconnects while the file is still being
	// uploaded. To remove an associated workflow from a server, you can provide an
	// empty OnUpload object, as in the following example. aws transfer update-server
	// --server-id s-01234567890abcdef --workflow-details '{"OnUpload":[]}'
	WorkflowDetails *types.WorkflowDetails

	noSmithyDocumentSerde
}

type UpdateServerOutput struct {

	// A system-assigned unique identifier for a server that the Transfer Family user
	// is assigned to.
	//
	// This member is required.
	ServerId *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationUpdateServerMiddlewares(stack *middleware.Stack, options Options) (err error) {
	err = stack.Serialize.Add(&awsAwsjson11_serializeOpUpdateServer{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsAwsjson11_deserializeOpUpdateServer{}, middleware.After)
	if err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddClientRequestIDMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddComputeContentLengthMiddleware(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = v4.AddComputePayloadSHA256Middleware(stack); err != nil {
		return err
	}
	if err = addRetryMiddlewares(stack, options); err != nil {
		return err
	}
	if err = addHTTPSignerV4Middleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = awsmiddleware.AddRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addOpUpdateServerValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opUpdateServer(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = awsmiddleware.AddRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opUpdateServer(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		SigningName:   "transfer",
		OperationName: "UpdateServer",
	}
}