/*
 * Copyright 2018-2023 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 * 
 * Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
 * the License. A copy of the License is located at
 * 
 * http://aws.amazon.com/apache2.0
 * 
 * or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
 * CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
 * and limitations under the License.
 */
package com.amazonaws.services.apigateway.model;

import java.io.Serializable;
import javax.annotation.Generated;

/**
 * <p>
 * Represents an HTTP, HTTP_PROXY, AWS, AWS_PROXY, or Mock integration.
 * </p>
 */
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class UpdateIntegrationResult extends com.amazonaws.AmazonWebServiceResult<com.amazonaws.ResponseMetadata> implements Serializable, Cloneable {

    /**
     * <p>
     * Specifies an API method integration type. The valid value is one of the following:
     * </p>
     * <p>
     * For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>), port
     * and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy
     * integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a private integration
     * and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * </p>
     */
    private String type;
    /**
     * <p>
     * Specifies the integration's HTTP method type.
     * </p>
     */
    private String httpMethod;
    /**
     * <p>
     * Specifies Uniform Resource Identifier (URI) of the integration endpoint.
     * </p>
     * <p>
     * For <code>HTTP</code> or <code>HTTP_PROXY</code> integrations, the URI must be a fully formed, encoded HTTP(S)
     * URL according to the RFC-3986 specification, for either standard integration, where <code>connectionType</code>
     * is not <code>VPC_LINK</code>, or private integration, where <code>connectionType</code> is <code>VPC_LINK</code>.
     * For a private HTTP integration, the URI is not used for routing. For <code>AWS</code> or <code>AWS_PROXY</code>
     * integrations, the URI is of the form
     * <code>arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}</code>. Here, {Region} is
     * the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service
     * (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast
     * host-name lookup. action can be used for an Amazon Web Services service action-based API, using an
     * Action={name}&amp;{p1}={v1}&amp;p2={v2}... query string. The ensuing {service_api} refers to a supported action
     * {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The
     * ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the
     * integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject,
     * the uri can be either
     * <code>arn:aws:apigateway:us-west-2:s3:action/GetObject&amp;Bucket={bucket}&amp;Key={key}</code> or
     * <code>arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}</code>
     * </p>
     */
    private String uri;
    /**
     * <p>
     * The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code> for
     * connections through the public routable internet or <code>VPC_LINK</code> for private connections between API
     * Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * </p>
     */
    private String connectionType;
    /**
     * <p>
     * The ID of the VpcLink used for the integration when <code>connectionType=VPC_LINK</code> and undefined,
     * otherwise.
     * </p>
     */
    private String connectionId;
    /**
     * <p>
     * Specifies the credentials required for the integration, if any. For AWS integrations, three options are
     * available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To
     * require that the caller's identity be passed through from the request, specify the string
     * <code>arn:aws:iam::\*:user/\*</code>. To use resource-based permissions on supported AWS services, specify null.
     * </p>
     */
    private String credentials;
    /**
     * <p>
     * A key-value map specifying request parameters that are passed from the method request to the back end. The key is
     * an integration request parameter name and the associated value is a method request parameter value or static
     * value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request
     * parameter value must match the pattern of <code>method.request.{location}.{name}</code>, where
     * <code>location</code> is <code>querystring</code>, <code>path</code>, or <code>header</code> and
     * <code>name</code> must be a valid and unique method request parameter name.
     * </p>
     */
    private java.util.Map<String, String> requestParameters;
    /**
     * <p>
     * Represents a map of Velocity templates that are applied on the request payload based on the value of the
     * Content-Type header sent by the client. The content type value is the key in this map, and the template (as a
     * String) is the value.
     * </p>
     */
    private java.util.Map<String, String> requestTemplates;
    /**
     * <p>
     * Specifies how the method request body of an unmapped content type will be passed through the integration request
     * to the back end without transformation. A content type is unmapped if no mapping template is defined in the
     * integration or the content type does not match any of the mapped content types, as specified in
     * <code>requestTemplates</code>. The valid value is one of the following: <code>WHEN_NO_MATCH</code>: passes the
     * method request body through the integration request to the back end without transformation when the method
     * request content type does not match any content type associated with the mapping templates defined in the
     * integration request. <code>WHEN_NO_TEMPLATES</code>: passes the method request body through the integration
     * request to the back end without transformation when no mapping template is defined in the integration request. If
     * a template is defined when this option is selected, the method request of an unmapped content-type will be
     * rejected with an HTTP 415 Unsupported Media Type response. <code>NEVER</code>: rejects the method request with an
     * HTTP 415 Unsupported Media Type response when either the method request content type does not match any content
     * type associated with the mapping templates defined in the integration request or no mapping template is defined
     * in the integration request.
     * </p>
     */
    private String passthroughBehavior;
    /**
     * <p>
     * Specifies how to handle request payload content type conversions. Supported values are
     * <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:
     * </p>
     * <p>
     * If this property is not defined, the request payload will be passed through from the method request to
     * integration request without modification, provided that the <code>passthroughBehavior</code> is configured to
     * support payload pass-through.
     * </p>
     */
    private String contentHandling;
    /**
     * <p>
     * Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.
     * </p>
     */
    private Integer timeoutInMillis;
    /**
     * <p>
     * Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the
     * <code>cacheNamespace</code>. You can specify the same <code>cacheNamespace</code> across resources to return the
     * same cached data for requests to different resources.
     * </p>
     */
    private String cacheNamespace;
    /**
     * <p>
     * A list of request parameters whose values API Gateway caches. To be valid values for
     * <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     * <code>requestParameters</code>.
     * </p>
     */
    private java.util.List<String> cacheKeyParameters;
    /**
     * <p>
     * Specifies the integration's responses.
     * </p>
     */
    private java.util.Map<String, IntegrationResponse> integrationResponses;
    /**
     * <p>
     * Specifies the TLS configuration for an integration.
     * </p>
     */
    private TlsConfig tlsConfig;

    /**
     * <p>
     * Specifies an API method integration type. The valid value is one of the following:
     * </p>
     * <p>
     * For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>), port
     * and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy
     * integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a private integration
     * and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * </p>
     * 
     * @param type
     *        Specifies an API method integration type. The valid value is one of the following:</p>
     *        <p>
     *        For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>
     *        ), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or
     *        HTTP proxy integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a
     *        private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * @see IntegrationType
     */

    public void setType(String type) {
        this.type = type;
    }

    /**
     * <p>
     * Specifies an API method integration type. The valid value is one of the following:
     * </p>
     * <p>
     * For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>), port
     * and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy
     * integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a private integration
     * and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * </p>
     * 
     * @return Specifies an API method integration type. The valid value is one of the following:</p>
     *         <p>
     *         For the HTTP and HTTP proxy integrations, each integration can specify a protocol (
     *         <code>http/https</code>), port and path. Standard 80 and 443 ports are supported as well as custom ports
     *         above 1024. An HTTP or HTTP proxy integration with a <code>connectionType</code> of <code>VPC_LINK</code>
     *         is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load
     *         balancer of a VPC.
     * @see IntegrationType
     */

    public String getType() {
        return this.type;
    }

    /**
     * <p>
     * Specifies an API method integration type. The valid value is one of the following:
     * </p>
     * <p>
     * For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>), port
     * and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy
     * integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a private integration
     * and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * </p>
     * 
     * @param type
     *        Specifies an API method integration type. The valid value is one of the following:</p>
     *        <p>
     *        For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>
     *        ), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or
     *        HTTP proxy integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a
     *        private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * @return Returns a reference to this object so that method calls can be chained together.
     * @see IntegrationType
     */

    public UpdateIntegrationResult withType(String type) {
        setType(type);
        return this;
    }

    /**
     * <p>
     * Specifies an API method integration type. The valid value is one of the following:
     * </p>
     * <p>
     * For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>), port
     * and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy
     * integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a private integration
     * and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * </p>
     * 
     * @param type
     *        Specifies an API method integration type. The valid value is one of the following:</p>
     *        <p>
     *        For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>
     *        ), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or
     *        HTTP proxy integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a
     *        private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * @see IntegrationType
     */

    public void setType(IntegrationType type) {
        withType(type);
    }

    /**
     * <p>
     * Specifies an API method integration type. The valid value is one of the following:
     * </p>
     * <p>
     * For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>), port
     * and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy
     * integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a private integration
     * and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * </p>
     * 
     * @param type
     *        Specifies an API method integration type. The valid value is one of the following:</p>
     *        <p>
     *        For the HTTP and HTTP proxy integrations, each integration can specify a protocol (<code>http/https</code>
     *        ), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or
     *        HTTP proxy integration with a <code>connectionType</code> of <code>VPC_LINK</code> is referred to as a
     *        private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.
     * @return Returns a reference to this object so that method calls can be chained together.
     * @see IntegrationType
     */

    public UpdateIntegrationResult withType(IntegrationType type) {
        this.type = type.toString();
        return this;
    }

    /**
     * <p>
     * Specifies the integration's HTTP method type.
     * </p>
     * 
     * @param httpMethod
     *        Specifies the integration's HTTP method type.
     */

    public void setHttpMethod(String httpMethod) {
        this.httpMethod = httpMethod;
    }

    /**
     * <p>
     * Specifies the integration's HTTP method type.
     * </p>
     * 
     * @return Specifies the integration's HTTP method type.
     */

    public String getHttpMethod() {
        return this.httpMethod;
    }

    /**
     * <p>
     * Specifies the integration's HTTP method type.
     * </p>
     * 
     * @param httpMethod
     *        Specifies the integration's HTTP method type.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withHttpMethod(String httpMethod) {
        setHttpMethod(httpMethod);
        return this;
    }

    /**
     * <p>
     * Specifies Uniform Resource Identifier (URI) of the integration endpoint.
     * </p>
     * <p>
     * For <code>HTTP</code> or <code>HTTP_PROXY</code> integrations, the URI must be a fully formed, encoded HTTP(S)
     * URL according to the RFC-3986 specification, for either standard integration, where <code>connectionType</code>
     * is not <code>VPC_LINK</code>, or private integration, where <code>connectionType</code> is <code>VPC_LINK</code>.
     * For a private HTTP integration, the URI is not used for routing. For <code>AWS</code> or <code>AWS_PROXY</code>
     * integrations, the URI is of the form
     * <code>arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}</code>. Here, {Region} is
     * the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service
     * (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast
     * host-name lookup. action can be used for an Amazon Web Services service action-based API, using an
     * Action={name}&amp;{p1}={v1}&amp;p2={v2}... query string. The ensuing {service_api} refers to a supported action
     * {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The
     * ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the
     * integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject,
     * the uri can be either
     * <code>arn:aws:apigateway:us-west-2:s3:action/GetObject&amp;Bucket={bucket}&amp;Key={key}</code> or
     * <code>arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}</code>
     * </p>
     * 
     * @param uri
     *        Specifies Uniform Resource Identifier (URI) of the integration endpoint.</p>
     *        <p>
     *        For <code>HTTP</code> or <code>HTTP_PROXY</code> integrations, the URI must be a fully formed, encoded
     *        HTTP(S) URL according to the RFC-3986 specification, for either standard integration, where
     *        <code>connectionType</code> is not <code>VPC_LINK</code>, or private integration, where
     *        <code>connectionType</code> is <code>VPC_LINK</code>. For a private HTTP integration, the URI is not used
     *        for routing. For <code>AWS</code> or <code>AWS_PROXY</code> integrations, the URI is of the form
     *        <code>arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}</code>. Here,
     *        {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web
     *        Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web
     *        Services service for fast host-name lookup. action can be used for an Amazon Web Services service
     *        action-based API, using an Action={name}&amp;{p1}={v1}&amp;p2={v2}... query string. The ensuing
     *        {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path
     *        can be used for an AWS service path-based API. The ensuing service_api refers to the path to an Amazon Web
     *        Services service resource, including the region of the integrated Amazon Web Services service, if
     *        applicable. For example, for integration with the S3 API of GetObject, the uri can be either
     *        <code>arn:aws:apigateway:us-west-2:s3:action/GetObject&amp;Bucket={bucket}&amp;Key={key}</code> or
     *        <code>arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}</code>
     */

    public void setUri(String uri) {
        this.uri = uri;
    }

    /**
     * <p>
     * Specifies Uniform Resource Identifier (URI) of the integration endpoint.
     * </p>
     * <p>
     * For <code>HTTP</code> or <code>HTTP_PROXY</code> integrations, the URI must be a fully formed, encoded HTTP(S)
     * URL according to the RFC-3986 specification, for either standard integration, where <code>connectionType</code>
     * is not <code>VPC_LINK</code>, or private integration, where <code>connectionType</code> is <code>VPC_LINK</code>.
     * For a private HTTP integration, the URI is not used for routing. For <code>AWS</code> or <code>AWS_PROXY</code>
     * integrations, the URI is of the form
     * <code>arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}</code>. Here, {Region} is
     * the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service
     * (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast
     * host-name lookup. action can be used for an Amazon Web Services service action-based API, using an
     * Action={name}&amp;{p1}={v1}&amp;p2={v2}... query string. The ensuing {service_api} refers to a supported action
     * {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The
     * ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the
     * integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject,
     * the uri can be either
     * <code>arn:aws:apigateway:us-west-2:s3:action/GetObject&amp;Bucket={bucket}&amp;Key={key}</code> or
     * <code>arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}</code>
     * </p>
     * 
     * @return Specifies Uniform Resource Identifier (URI) of the integration endpoint.</p>
     *         <p>
     *         For <code>HTTP</code> or <code>HTTP_PROXY</code> integrations, the URI must be a fully formed, encoded
     *         HTTP(S) URL according to the RFC-3986 specification, for either standard integration, where
     *         <code>connectionType</code> is not <code>VPC_LINK</code>, or private integration, where
     *         <code>connectionType</code> is <code>VPC_LINK</code>. For a private HTTP integration, the URI is not used
     *         for routing. For <code>AWS</code> or <code>AWS_PROXY</code> integrations, the URI is of the form
     *         <code>arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}</code>. Here,
     *         {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web
     *         Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web
     *         Services service for fast host-name lookup. action can be used for an Amazon Web Services service
     *         action-based API, using an Action={name}&amp;{p1}={v1}&amp;p2={v2}... query string. The ensuing
     *         {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path
     *         can be used for an AWS service path-based API. The ensuing service_api refers to the path to an Amazon
     *         Web Services service resource, including the region of the integrated Amazon Web Services service, if
     *         applicable. For example, for integration with the S3 API of GetObject, the uri can be either
     *         <code>arn:aws:apigateway:us-west-2:s3:action/GetObject&amp;Bucket={bucket}&amp;Key={key}</code> or
     *         <code>arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}</code>
     */

    public String getUri() {
        return this.uri;
    }

    /**
     * <p>
     * Specifies Uniform Resource Identifier (URI) of the integration endpoint.
     * </p>
     * <p>
     * For <code>HTTP</code> or <code>HTTP_PROXY</code> integrations, the URI must be a fully formed, encoded HTTP(S)
     * URL according to the RFC-3986 specification, for either standard integration, where <code>connectionType</code>
     * is not <code>VPC_LINK</code>, or private integration, where <code>connectionType</code> is <code>VPC_LINK</code>.
     * For a private HTTP integration, the URI is not used for routing. For <code>AWS</code> or <code>AWS_PROXY</code>
     * integrations, the URI is of the form
     * <code>arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}</code>. Here, {Region} is
     * the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service
     * (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast
     * host-name lookup. action can be used for an Amazon Web Services service action-based API, using an
     * Action={name}&amp;{p1}={v1}&amp;p2={v2}... query string. The ensuing {service_api} refers to a supported action
     * {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The
     * ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the
     * integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject,
     * the uri can be either
     * <code>arn:aws:apigateway:us-west-2:s3:action/GetObject&amp;Bucket={bucket}&amp;Key={key}</code> or
     * <code>arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}</code>
     * </p>
     * 
     * @param uri
     *        Specifies Uniform Resource Identifier (URI) of the integration endpoint.</p>
     *        <p>
     *        For <code>HTTP</code> or <code>HTTP_PROXY</code> integrations, the URI must be a fully formed, encoded
     *        HTTP(S) URL according to the RFC-3986 specification, for either standard integration, where
     *        <code>connectionType</code> is not <code>VPC_LINK</code>, or private integration, where
     *        <code>connectionType</code> is <code>VPC_LINK</code>. For a private HTTP integration, the URI is not used
     *        for routing. For <code>AWS</code> or <code>AWS_PROXY</code> integrations, the URI is of the form
     *        <code>arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}</code>. Here,
     *        {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web
     *        Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web
     *        Services service for fast host-name lookup. action can be used for an Amazon Web Services service
     *        action-based API, using an Action={name}&amp;{p1}={v1}&amp;p2={v2}... query string. The ensuing
     *        {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path
     *        can be used for an AWS service path-based API. The ensuing service_api refers to the path to an Amazon Web
     *        Services service resource, including the region of the integrated Amazon Web Services service, if
     *        applicable. For example, for integration with the S3 API of GetObject, the uri can be either
     *        <code>arn:aws:apigateway:us-west-2:s3:action/GetObject&amp;Bucket={bucket}&amp;Key={key}</code> or
     *        <code>arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}</code>
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withUri(String uri) {
        setUri(uri);
        return this;
    }

    /**
     * <p>
     * The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code> for
     * connections through the public routable internet or <code>VPC_LINK</code> for private connections between API
     * Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * </p>
     * 
     * @param connectionType
     *        The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code>
     *        for connections through the public routable internet or <code>VPC_LINK</code> for private connections
     *        between API Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * @see ConnectionType
     */

    public void setConnectionType(String connectionType) {
        this.connectionType = connectionType;
    }

    /**
     * <p>
     * The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code> for
     * connections through the public routable internet or <code>VPC_LINK</code> for private connections between API
     * Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * </p>
     * 
     * @return The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code>
     *         for connections through the public routable internet or <code>VPC_LINK</code> for private connections
     *         between API Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * @see ConnectionType
     */

    public String getConnectionType() {
        return this.connectionType;
    }

    /**
     * <p>
     * The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code> for
     * connections through the public routable internet or <code>VPC_LINK</code> for private connections between API
     * Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * </p>
     * 
     * @param connectionType
     *        The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code>
     *        for connections through the public routable internet or <code>VPC_LINK</code> for private connections
     *        between API Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * @return Returns a reference to this object so that method calls can be chained together.
     * @see ConnectionType
     */

    public UpdateIntegrationResult withConnectionType(String connectionType) {
        setConnectionType(connectionType);
        return this;
    }

    /**
     * <p>
     * The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code> for
     * connections through the public routable internet or <code>VPC_LINK</code> for private connections between API
     * Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * </p>
     * 
     * @param connectionType
     *        The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code>
     *        for connections through the public routable internet or <code>VPC_LINK</code> for private connections
     *        between API Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * @see ConnectionType
     */

    public void setConnectionType(ConnectionType connectionType) {
        withConnectionType(connectionType);
    }

    /**
     * <p>
     * The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code> for
     * connections through the public routable internet or <code>VPC_LINK</code> for private connections between API
     * Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * </p>
     * 
     * @param connectionType
     *        The type of the network connection to the integration endpoint. The valid value is <code>INTERNET</code>
     *        for connections through the public routable internet or <code>VPC_LINK</code> for private connections
     *        between API Gateway and a network load balancer in a VPC. The default value is <code>INTERNET</code>.
     * @return Returns a reference to this object so that method calls can be chained together.
     * @see ConnectionType
     */

    public UpdateIntegrationResult withConnectionType(ConnectionType connectionType) {
        this.connectionType = connectionType.toString();
        return this;
    }

    /**
     * <p>
     * The ID of the VpcLink used for the integration when <code>connectionType=VPC_LINK</code> and undefined,
     * otherwise.
     * </p>
     * 
     * @param connectionId
     *        The ID of the VpcLink used for the integration when <code>connectionType=VPC_LINK</code> and undefined,
     *        otherwise.
     */

    public void setConnectionId(String connectionId) {
        this.connectionId = connectionId;
    }

    /**
     * <p>
     * The ID of the VpcLink used for the integration when <code>connectionType=VPC_LINK</code> and undefined,
     * otherwise.
     * </p>
     * 
     * @return The ID of the VpcLink used for the integration when <code>connectionType=VPC_LINK</code> and undefined,
     *         otherwise.
     */

    public String getConnectionId() {
        return this.connectionId;
    }

    /**
     * <p>
     * The ID of the VpcLink used for the integration when <code>connectionType=VPC_LINK</code> and undefined,
     * otherwise.
     * </p>
     * 
     * @param connectionId
     *        The ID of the VpcLink used for the integration when <code>connectionType=VPC_LINK</code> and undefined,
     *        otherwise.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withConnectionId(String connectionId) {
        setConnectionId(connectionId);
        return this;
    }

    /**
     * <p>
     * Specifies the credentials required for the integration, if any. For AWS integrations, three options are
     * available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To
     * require that the caller's identity be passed through from the request, specify the string
     * <code>arn:aws:iam::\*:user/\*</code>. To use resource-based permissions on supported AWS services, specify null.
     * </p>
     * 
     * @param credentials
     *        Specifies the credentials required for the integration, if any. For AWS integrations, three options are
     *        available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To
     *        require that the caller's identity be passed through from the request, specify the string
     *        <code>arn:aws:iam::\*:user/\*</code>. To use resource-based permissions on supported AWS services, specify
     *        null.
     */

    public void setCredentials(String credentials) {
        this.credentials = credentials;
    }

    /**
     * <p>
     * Specifies the credentials required for the integration, if any. For AWS integrations, three options are
     * available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To
     * require that the caller's identity be passed through from the request, specify the string
     * <code>arn:aws:iam::\*:user/\*</code>. To use resource-based permissions on supported AWS services, specify null.
     * </p>
     * 
     * @return Specifies the credentials required for the integration, if any. For AWS integrations, three options are
     *         available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN).
     *         To require that the caller's identity be passed through from the request, specify the string
     *         <code>arn:aws:iam::\*:user/\*</code>. To use resource-based permissions on supported AWS services,
     *         specify null.
     */

    public String getCredentials() {
        return this.credentials;
    }

    /**
     * <p>
     * Specifies the credentials required for the integration, if any. For AWS integrations, three options are
     * available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To
     * require that the caller's identity be passed through from the request, specify the string
     * <code>arn:aws:iam::\*:user/\*</code>. To use resource-based permissions on supported AWS services, specify null.
     * </p>
     * 
     * @param credentials
     *        Specifies the credentials required for the integration, if any. For AWS integrations, three options are
     *        available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To
     *        require that the caller's identity be passed through from the request, specify the string
     *        <code>arn:aws:iam::\*:user/\*</code>. To use resource-based permissions on supported AWS services, specify
     *        null.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withCredentials(String credentials) {
        setCredentials(credentials);
        return this;
    }

    /**
     * <p>
     * A key-value map specifying request parameters that are passed from the method request to the back end. The key is
     * an integration request parameter name and the associated value is a method request parameter value or static
     * value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request
     * parameter value must match the pattern of <code>method.request.{location}.{name}</code>, where
     * <code>location</code> is <code>querystring</code>, <code>path</code>, or <code>header</code> and
     * <code>name</code> must be a valid and unique method request parameter name.
     * </p>
     * 
     * @return A key-value map specifying request parameters that are passed from the method request to the back end.
     *         The key is an integration request parameter name and the associated value is a method request parameter
     *         value or static value that must be enclosed within single quotes and pre-encoded as required by the back
     *         end. The method request parameter value must match the pattern of
     *         <code>method.request.{location}.{name}</code>, where <code>location</code> is <code>querystring</code>,
     *         <code>path</code>, or <code>header</code> and <code>name</code> must be a valid and unique method request
     *         parameter name.
     */

    public java.util.Map<String, String> getRequestParameters() {
        return requestParameters;
    }

    /**
     * <p>
     * A key-value map specifying request parameters that are passed from the method request to the back end. The key is
     * an integration request parameter name and the associated value is a method request parameter value or static
     * value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request
     * parameter value must match the pattern of <code>method.request.{location}.{name}</code>, where
     * <code>location</code> is <code>querystring</code>, <code>path</code>, or <code>header</code> and
     * <code>name</code> must be a valid and unique method request parameter name.
     * </p>
     * 
     * @param requestParameters
     *        A key-value map specifying request parameters that are passed from the method request to the back end. The
     *        key is an integration request parameter name and the associated value is a method request parameter value
     *        or static value that must be enclosed within single quotes and pre-encoded as required by the back end.
     *        The method request parameter value must match the pattern of <code>method.request.{location}.{name}</code>
     *        , where <code>location</code> is <code>querystring</code>, <code>path</code>, or <code>header</code> and
     *        <code>name</code> must be a valid and unique method request parameter name.
     */

    public void setRequestParameters(java.util.Map<String, String> requestParameters) {
        this.requestParameters = requestParameters;
    }

    /**
     * <p>
     * A key-value map specifying request parameters that are passed from the method request to the back end. The key is
     * an integration request parameter name and the associated value is a method request parameter value or static
     * value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request
     * parameter value must match the pattern of <code>method.request.{location}.{name}</code>, where
     * <code>location</code> is <code>querystring</code>, <code>path</code>, or <code>header</code> and
     * <code>name</code> must be a valid and unique method request parameter name.
     * </p>
     * 
     * @param requestParameters
     *        A key-value map specifying request parameters that are passed from the method request to the back end. The
     *        key is an integration request parameter name and the associated value is a method request parameter value
     *        or static value that must be enclosed within single quotes and pre-encoded as required by the back end.
     *        The method request parameter value must match the pattern of <code>method.request.{location}.{name}</code>
     *        , where <code>location</code> is <code>querystring</code>, <code>path</code>, or <code>header</code> and
     *        <code>name</code> must be a valid and unique method request parameter name.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withRequestParameters(java.util.Map<String, String> requestParameters) {
        setRequestParameters(requestParameters);
        return this;
    }

    /**
     * Add a single RequestParameters entry
     *
     * @see UpdateIntegrationResult#withRequestParameters
     * @returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult addRequestParametersEntry(String key, String value) {
        if (null == this.requestParameters) {
            this.requestParameters = new java.util.HashMap<String, String>();
        }
        if (this.requestParameters.containsKey(key))
            throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
        this.requestParameters.put(key, value);
        return this;
    }

    /**
     * Removes all the entries added into RequestParameters.
     *
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult clearRequestParametersEntries() {
        this.requestParameters = null;
        return this;
    }

    /**
     * <p>
     * Represents a map of Velocity templates that are applied on the request payload based on the value of the
     * Content-Type header sent by the client. The content type value is the key in this map, and the template (as a
     * String) is the value.
     * </p>
     * 
     * @return Represents a map of Velocity templates that are applied on the request payload based on the value of the
     *         Content-Type header sent by the client. The content type value is the key in this map, and the template
     *         (as a String) is the value.
     */

    public java.util.Map<String, String> getRequestTemplates() {
        return requestTemplates;
    }

    /**
     * <p>
     * Represents a map of Velocity templates that are applied on the request payload based on the value of the
     * Content-Type header sent by the client. The content type value is the key in this map, and the template (as a
     * String) is the value.
     * </p>
     * 
     * @param requestTemplates
     *        Represents a map of Velocity templates that are applied on the request payload based on the value of the
     *        Content-Type header sent by the client. The content type value is the key in this map, and the template
     *        (as a String) is the value.
     */

    public void setRequestTemplates(java.util.Map<String, String> requestTemplates) {
        this.requestTemplates = requestTemplates;
    }

    /**
     * <p>
     * Represents a map of Velocity templates that are applied on the request payload based on the value of the
     * Content-Type header sent by the client. The content type value is the key in this map, and the template (as a
     * String) is the value.
     * </p>
     * 
     * @param requestTemplates
     *        Represents a map of Velocity templates that are applied on the request payload based on the value of the
     *        Content-Type header sent by the client. The content type value is the key in this map, and the template
     *        (as a String) is the value.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withRequestTemplates(java.util.Map<String, String> requestTemplates) {
        setRequestTemplates(requestTemplates);
        return this;
    }

    /**
     * Add a single RequestTemplates entry
     *
     * @see UpdateIntegrationResult#withRequestTemplates
     * @returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult addRequestTemplatesEntry(String key, String value) {
        if (null == this.requestTemplates) {
            this.requestTemplates = new java.util.HashMap<String, String>();
        }
        if (this.requestTemplates.containsKey(key))
            throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
        this.requestTemplates.put(key, value);
        return this;
    }

    /**
     * Removes all the entries added into RequestTemplates.
     *
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult clearRequestTemplatesEntries() {
        this.requestTemplates = null;
        return this;
    }

    /**
     * <p>
     * Specifies how the method request body of an unmapped content type will be passed through the integration request
     * to the back end without transformation. A content type is unmapped if no mapping template is defined in the
     * integration or the content type does not match any of the mapped content types, as specified in
     * <code>requestTemplates</code>. The valid value is one of the following: <code>WHEN_NO_MATCH</code>: passes the
     * method request body through the integration request to the back end without transformation when the method
     * request content type does not match any content type associated with the mapping templates defined in the
     * integration request. <code>WHEN_NO_TEMPLATES</code>: passes the method request body through the integration
     * request to the back end without transformation when no mapping template is defined in the integration request. If
     * a template is defined when this option is selected, the method request of an unmapped content-type will be
     * rejected with an HTTP 415 Unsupported Media Type response. <code>NEVER</code>: rejects the method request with an
     * HTTP 415 Unsupported Media Type response when either the method request content type does not match any content
     * type associated with the mapping templates defined in the integration request or no mapping template is defined
     * in the integration request.
     * </p>
     * 
     * @param passthroughBehavior
     *        Specifies how the method request body of an unmapped content type will be passed through the integration
     *        request to the back end without transformation. A content type is unmapped if no mapping template is
     *        defined in the integration or the content type does not match any of the mapped content types, as
     *        specified in <code>requestTemplates</code>. The valid value is one of the following:
     *        <code>WHEN_NO_MATCH</code>: passes the method request body through the integration request to the back end
     *        without transformation when the method request content type does not match any content type associated
     *        with the mapping templates defined in the integration request. <code>WHEN_NO_TEMPLATES</code>: passes the
     *        method request body through the integration request to the back end without transformation when no mapping
     *        template is defined in the integration request. If a template is defined when this option is selected, the
     *        method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type
     *        response. <code>NEVER</code>: rejects the method request with an HTTP 415 Unsupported Media Type response
     *        when either the method request content type does not match any content type associated with the mapping
     *        templates defined in the integration request or no mapping template is defined in the integration request.
     */

    public void setPassthroughBehavior(String passthroughBehavior) {
        this.passthroughBehavior = passthroughBehavior;
    }

    /**
     * <p>
     * Specifies how the method request body of an unmapped content type will be passed through the integration request
     * to the back end without transformation. A content type is unmapped if no mapping template is defined in the
     * integration or the content type does not match any of the mapped content types, as specified in
     * <code>requestTemplates</code>. The valid value is one of the following: <code>WHEN_NO_MATCH</code>: passes the
     * method request body through the integration request to the back end without transformation when the method
     * request content type does not match any content type associated with the mapping templates defined in the
     * integration request. <code>WHEN_NO_TEMPLATES</code>: passes the method request body through the integration
     * request to the back end without transformation when no mapping template is defined in the integration request. If
     * a template is defined when this option is selected, the method request of an unmapped content-type will be
     * rejected with an HTTP 415 Unsupported Media Type response. <code>NEVER</code>: rejects the method request with an
     * HTTP 415 Unsupported Media Type response when either the method request content type does not match any content
     * type associated with the mapping templates defined in the integration request or no mapping template is defined
     * in the integration request.
     * </p>
     * 
     * @return Specifies how the method request body of an unmapped content type will be passed through the integration
     *         request to the back end without transformation. A content type is unmapped if no mapping template is
     *         defined in the integration or the content type does not match any of the mapped content types, as
     *         specified in <code>requestTemplates</code>. The valid value is one of the following:
     *         <code>WHEN_NO_MATCH</code>: passes the method request body through the integration request to the back
     *         end without transformation when the method request content type does not match any content type
     *         associated with the mapping templates defined in the integration request. <code>WHEN_NO_TEMPLATES</code>:
     *         passes the method request body through the integration request to the back end without transformation
     *         when no mapping template is defined in the integration request. If a template is defined when this option
     *         is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported
     *         Media Type response. <code>NEVER</code>: rejects the method request with an HTTP 415 Unsupported Media
     *         Type response when either the method request content type does not match any content type associated with
     *         the mapping templates defined in the integration request or no mapping template is defined in the
     *         integration request.
     */

    public String getPassthroughBehavior() {
        return this.passthroughBehavior;
    }

    /**
     * <p>
     * Specifies how the method request body of an unmapped content type will be passed through the integration request
     * to the back end without transformation. A content type is unmapped if no mapping template is defined in the
     * integration or the content type does not match any of the mapped content types, as specified in
     * <code>requestTemplates</code>. The valid value is one of the following: <code>WHEN_NO_MATCH</code>: passes the
     * method request body through the integration request to the back end without transformation when the method
     * request content type does not match any content type associated with the mapping templates defined in the
     * integration request. <code>WHEN_NO_TEMPLATES</code>: passes the method request body through the integration
     * request to the back end without transformation when no mapping template is defined in the integration request. If
     * a template is defined when this option is selected, the method request of an unmapped content-type will be
     * rejected with an HTTP 415 Unsupported Media Type response. <code>NEVER</code>: rejects the method request with an
     * HTTP 415 Unsupported Media Type response when either the method request content type does not match any content
     * type associated with the mapping templates defined in the integration request or no mapping template is defined
     * in the integration request.
     * </p>
     * 
     * @param passthroughBehavior
     *        Specifies how the method request body of an unmapped content type will be passed through the integration
     *        request to the back end without transformation. A content type is unmapped if no mapping template is
     *        defined in the integration or the content type does not match any of the mapped content types, as
     *        specified in <code>requestTemplates</code>. The valid value is one of the following:
     *        <code>WHEN_NO_MATCH</code>: passes the method request body through the integration request to the back end
     *        without transformation when the method request content type does not match any content type associated
     *        with the mapping templates defined in the integration request. <code>WHEN_NO_TEMPLATES</code>: passes the
     *        method request body through the integration request to the back end without transformation when no mapping
     *        template is defined in the integration request. If a template is defined when this option is selected, the
     *        method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type
     *        response. <code>NEVER</code>: rejects the method request with an HTTP 415 Unsupported Media Type response
     *        when either the method request content type does not match any content type associated with the mapping
     *        templates defined in the integration request or no mapping template is defined in the integration request.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withPassthroughBehavior(String passthroughBehavior) {
        setPassthroughBehavior(passthroughBehavior);
        return this;
    }

    /**
     * <p>
     * Specifies how to handle request payload content type conversions. Supported values are
     * <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:
     * </p>
     * <p>
     * If this property is not defined, the request payload will be passed through from the method request to
     * integration request without modification, provided that the <code>passthroughBehavior</code> is configured to
     * support payload pass-through.
     * </p>
     * 
     * @param contentHandling
     *        Specifies how to handle request payload content type conversions. Supported values are
     *        <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:</p>
     *        <p>
     *        If this property is not defined, the request payload will be passed through from the method request to
     *        integration request without modification, provided that the <code>passthroughBehavior</code> is configured
     *        to support payload pass-through.
     * @see ContentHandlingStrategy
     */

    public void setContentHandling(String contentHandling) {
        this.contentHandling = contentHandling;
    }

    /**
     * <p>
     * Specifies how to handle request payload content type conversions. Supported values are
     * <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:
     * </p>
     * <p>
     * If this property is not defined, the request payload will be passed through from the method request to
     * integration request without modification, provided that the <code>passthroughBehavior</code> is configured to
     * support payload pass-through.
     * </p>
     * 
     * @return Specifies how to handle request payload content type conversions. Supported values are
     *         <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:</p>
     *         <p>
     *         If this property is not defined, the request payload will be passed through from the method request to
     *         integration request without modification, provided that the <code>passthroughBehavior</code> is
     *         configured to support payload pass-through.
     * @see ContentHandlingStrategy
     */

    public String getContentHandling() {
        return this.contentHandling;
    }

    /**
     * <p>
     * Specifies how to handle request payload content type conversions. Supported values are
     * <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:
     * </p>
     * <p>
     * If this property is not defined, the request payload will be passed through from the method request to
     * integration request without modification, provided that the <code>passthroughBehavior</code> is configured to
     * support payload pass-through.
     * </p>
     * 
     * @param contentHandling
     *        Specifies how to handle request payload content type conversions. Supported values are
     *        <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:</p>
     *        <p>
     *        If this property is not defined, the request payload will be passed through from the method request to
     *        integration request without modification, provided that the <code>passthroughBehavior</code> is configured
     *        to support payload pass-through.
     * @return Returns a reference to this object so that method calls can be chained together.
     * @see ContentHandlingStrategy
     */

    public UpdateIntegrationResult withContentHandling(String contentHandling) {
        setContentHandling(contentHandling);
        return this;
    }

    /**
     * <p>
     * Specifies how to handle request payload content type conversions. Supported values are
     * <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:
     * </p>
     * <p>
     * If this property is not defined, the request payload will be passed through from the method request to
     * integration request without modification, provided that the <code>passthroughBehavior</code> is configured to
     * support payload pass-through.
     * </p>
     * 
     * @param contentHandling
     *        Specifies how to handle request payload content type conversions. Supported values are
     *        <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:</p>
     *        <p>
     *        If this property is not defined, the request payload will be passed through from the method request to
     *        integration request without modification, provided that the <code>passthroughBehavior</code> is configured
     *        to support payload pass-through.
     * @see ContentHandlingStrategy
     */

    public void setContentHandling(ContentHandlingStrategy contentHandling) {
        withContentHandling(contentHandling);
    }

    /**
     * <p>
     * Specifies how to handle request payload content type conversions. Supported values are
     * <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:
     * </p>
     * <p>
     * If this property is not defined, the request payload will be passed through from the method request to
     * integration request without modification, provided that the <code>passthroughBehavior</code> is configured to
     * support payload pass-through.
     * </p>
     * 
     * @param contentHandling
     *        Specifies how to handle request payload content type conversions. Supported values are
     *        <code>CONVERT_TO_BINARY</code> and <code>CONVERT_TO_TEXT</code>, with the following behaviors:</p>
     *        <p>
     *        If this property is not defined, the request payload will be passed through from the method request to
     *        integration request without modification, provided that the <code>passthroughBehavior</code> is configured
     *        to support payload pass-through.
     * @return Returns a reference to this object so that method calls can be chained together.
     * @see ContentHandlingStrategy
     */

    public UpdateIntegrationResult withContentHandling(ContentHandlingStrategy contentHandling) {
        this.contentHandling = contentHandling.toString();
        return this;
    }

    /**
     * <p>
     * Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.
     * </p>
     * 
     * @param timeoutInMillis
     *        Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.
     */

    public void setTimeoutInMillis(Integer timeoutInMillis) {
        this.timeoutInMillis = timeoutInMillis;
    }

    /**
     * <p>
     * Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.
     * </p>
     * 
     * @return Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29
     *         seconds.
     */

    public Integer getTimeoutInMillis() {
        return this.timeoutInMillis;
    }

    /**
     * <p>
     * Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.
     * </p>
     * 
     * @param timeoutInMillis
     *        Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withTimeoutInMillis(Integer timeoutInMillis) {
        setTimeoutInMillis(timeoutInMillis);
        return this;
    }

    /**
     * <p>
     * Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the
     * <code>cacheNamespace</code>. You can specify the same <code>cacheNamespace</code> across resources to return the
     * same cached data for requests to different resources.
     * </p>
     * 
     * @param cacheNamespace
     *        Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the
     *        <code>cacheNamespace</code>. You can specify the same <code>cacheNamespace</code> across resources to
     *        return the same cached data for requests to different resources.
     */

    public void setCacheNamespace(String cacheNamespace) {
        this.cacheNamespace = cacheNamespace;
    }

    /**
     * <p>
     * Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the
     * <code>cacheNamespace</code>. You can specify the same <code>cacheNamespace</code> across resources to return the
     * same cached data for requests to different resources.
     * </p>
     * 
     * @return Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the
     *         <code>cacheNamespace</code>. You can specify the same <code>cacheNamespace</code> across resources to
     *         return the same cached data for requests to different resources.
     */

    public String getCacheNamespace() {
        return this.cacheNamespace;
    }

    /**
     * <p>
     * Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the
     * <code>cacheNamespace</code>. You can specify the same <code>cacheNamespace</code> across resources to return the
     * same cached data for requests to different resources.
     * </p>
     * 
     * @param cacheNamespace
     *        Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the
     *        <code>cacheNamespace</code>. You can specify the same <code>cacheNamespace</code> across resources to
     *        return the same cached data for requests to different resources.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withCacheNamespace(String cacheNamespace) {
        setCacheNamespace(cacheNamespace);
        return this;
    }

    /**
     * <p>
     * A list of request parameters whose values API Gateway caches. To be valid values for
     * <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     * <code>requestParameters</code>.
     * </p>
     * 
     * @return A list of request parameters whose values API Gateway caches. To be valid values for
     *         <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     *         <code>requestParameters</code>.
     */

    public java.util.List<String> getCacheKeyParameters() {
        return cacheKeyParameters;
    }

    /**
     * <p>
     * A list of request parameters whose values API Gateway caches. To be valid values for
     * <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     * <code>requestParameters</code>.
     * </p>
     * 
     * @param cacheKeyParameters
     *        A list of request parameters whose values API Gateway caches. To be valid values for
     *        <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     *        <code>requestParameters</code>.
     */

    public void setCacheKeyParameters(java.util.Collection<String> cacheKeyParameters) {
        if (cacheKeyParameters == null) {
            this.cacheKeyParameters = null;
            return;
        }

        this.cacheKeyParameters = new java.util.ArrayList<String>(cacheKeyParameters);
    }

    /**
     * <p>
     * A list of request parameters whose values API Gateway caches. To be valid values for
     * <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     * <code>requestParameters</code>.
     * </p>
     * <p>
     * <b>NOTE:</b> This method appends the values to the existing list (if any). Use
     * {@link #setCacheKeyParameters(java.util.Collection)} or {@link #withCacheKeyParameters(java.util.Collection)} if
     * you want to override the existing values.
     * </p>
     * 
     * @param cacheKeyParameters
     *        A list of request parameters whose values API Gateway caches. To be valid values for
     *        <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     *        <code>requestParameters</code>.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withCacheKeyParameters(String... cacheKeyParameters) {
        if (this.cacheKeyParameters == null) {
            setCacheKeyParameters(new java.util.ArrayList<String>(cacheKeyParameters.length));
        }
        for (String ele : cacheKeyParameters) {
            this.cacheKeyParameters.add(ele);
        }
        return this;
    }

    /**
     * <p>
     * A list of request parameters whose values API Gateway caches. To be valid values for
     * <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     * <code>requestParameters</code>.
     * </p>
     * 
     * @param cacheKeyParameters
     *        A list of request parameters whose values API Gateway caches. To be valid values for
     *        <code>cacheKeyParameters</code>, these parameters must also be specified for Method
     *        <code>requestParameters</code>.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withCacheKeyParameters(java.util.Collection<String> cacheKeyParameters) {
        setCacheKeyParameters(cacheKeyParameters);
        return this;
    }

    /**
     * <p>
     * Specifies the integration's responses.
     * </p>
     * 
     * @return Specifies the integration's responses.
     */

    public java.util.Map<String, IntegrationResponse> getIntegrationResponses() {
        return integrationResponses;
    }

    /**
     * <p>
     * Specifies the integration's responses.
     * </p>
     * 
     * @param integrationResponses
     *        Specifies the integration's responses.
     */

    public void setIntegrationResponses(java.util.Map<String, IntegrationResponse> integrationResponses) {
        this.integrationResponses = integrationResponses;
    }

    /**
     * <p>
     * Specifies the integration's responses.
     * </p>
     * 
     * @param integrationResponses
     *        Specifies the integration's responses.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withIntegrationResponses(java.util.Map<String, IntegrationResponse> integrationResponses) {
        setIntegrationResponses(integrationResponses);
        return this;
    }

    /**
     * Add a single IntegrationResponses entry
     *
     * @see UpdateIntegrationResult#withIntegrationResponses
     * @returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult addIntegrationResponsesEntry(String key, IntegrationResponse value) {
        if (null == this.integrationResponses) {
            this.integrationResponses = new java.util.HashMap<String, IntegrationResponse>();
        }
        if (this.integrationResponses.containsKey(key))
            throw new IllegalArgumentException("Duplicated keys (" + key.toString() + ") are provided.");
        this.integrationResponses.put(key, value);
        return this;
    }

    /**
     * Removes all the entries added into IntegrationResponses.
     *
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult clearIntegrationResponsesEntries() {
        this.integrationResponses = null;
        return this;
    }

    /**
     * <p>
     * Specifies the TLS configuration for an integration.
     * </p>
     * 
     * @param tlsConfig
     *        Specifies the TLS configuration for an integration.
     */

    public void setTlsConfig(TlsConfig tlsConfig) {
        this.tlsConfig = tlsConfig;
    }

    /**
     * <p>
     * Specifies the TLS configuration for an integration.
     * </p>
     * 
     * @return Specifies the TLS configuration for an integration.
     */

    public TlsConfig getTlsConfig() {
        return this.tlsConfig;
    }

    /**
     * <p>
     * Specifies the TLS configuration for an integration.
     * </p>
     * 
     * @param tlsConfig
     *        Specifies the TLS configuration for an integration.
     * @return Returns a reference to this object so that method calls can be chained together.
     */

    public UpdateIntegrationResult withTlsConfig(TlsConfig tlsConfig) {
        setTlsConfig(tlsConfig);
        return this;
    }

    /**
     * Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be
     * redacted from this string using a placeholder value.
     *
     * @return A string representation of this object.
     *
     * @see java.lang.Object#toString()
     */
    @Override
    public String toString() {
        StringBuilder sb = new StringBuilder();
        sb.append("{");
        if (getType() != null)
            sb.append("Type: ").append(getType()).append(",");
        if (getHttpMethod() != null)
            sb.append("HttpMethod: ").append(getHttpMethod()).append(",");
        if (getUri() != null)
            sb.append("Uri: ").append(getUri()).append(",");
        if (getConnectionType() != null)
            sb.append("ConnectionType: ").append(getConnectionType()).append(",");
        if (getConnectionId() != null)
            sb.append("ConnectionId: ").append(getConnectionId()).append(",");
        if (getCredentials() != null)
            sb.append("Credentials: ").append(getCredentials()).append(",");
        if (getRequestParameters() != null)
            sb.append("RequestParameters: ").append(getRequestParameters()).append(",");
        if (getRequestTemplates() != null)
            sb.append("RequestTemplates: ").append(getRequestTemplates()).append(",");
        if (getPassthroughBehavior() != null)
            sb.append("PassthroughBehavior: ").append(getPassthroughBehavior()).append(",");
        if (getContentHandling() != null)
            sb.append("ContentHandling: ").append(getContentHandling()).append(",");
        if (getTimeoutInMillis() != null)
            sb.append("TimeoutInMillis: ").append(getTimeoutInMillis()).append(",");
        if (getCacheNamespace() != null)
            sb.append("CacheNamespace: ").append(getCacheNamespace()).append(",");
        if (getCacheKeyParameters() != null)
            sb.append("CacheKeyParameters: ").append(getCacheKeyParameters()).append(",");
        if (getIntegrationResponses() != null)
            sb.append("IntegrationResponses: ").append(getIntegrationResponses()).append(",");
        if (getTlsConfig() != null)
            sb.append("TlsConfig: ").append(getTlsConfig());
        sb.append("}");
        return sb.toString();
    }

    @Override
    public boolean equals(Object obj) {
        if (this == obj)
            return true;
        if (obj == null)
            return false;

        if (obj instanceof UpdateIntegrationResult == false)
            return false;
        UpdateIntegrationResult other = (UpdateIntegrationResult) obj;
        if (other.getType() == null ^ this.getType() == null)
            return false;
        if (other.getType() != null && other.getType().equals(this.getType()) == false)
            return false;
        if (other.getHttpMethod() == null ^ this.getHttpMethod() == null)
            return false;
        if (other.getHttpMethod() != null && other.getHttpMethod().equals(this.getHttpMethod()) == false)
            return false;
        if (other.getUri() == null ^ this.getUri() == null)
            return false;
        if (other.getUri() != null && other.getUri().equals(this.getUri()) == false)
            return false;
        if (other.getConnectionType() == null ^ this.getConnectionType() == null)
            return false;
        if (other.getConnectionType() != null && other.getConnectionType().equals(this.getConnectionType()) == false)
            return false;
        if (other.getConnectionId() == null ^ this.getConnectionId() == null)
            return false;
        if (other.getConnectionId() != null && other.getConnectionId().equals(this.getConnectionId()) == false)
            return false;
        if (other.getCredentials() == null ^ this.getCredentials() == null)
            return false;
        if (other.getCredentials() != null && other.getCredentials().equals(this.getCredentials()) == false)
            return false;
        if (other.getRequestParameters() == null ^ this.getRequestParameters() == null)
            return false;
        if (other.getRequestParameters() != null && other.getRequestParameters().equals(this.getRequestParameters()) == false)
            return false;
        if (other.getRequestTemplates() == null ^ this.getRequestTemplates() == null)
            return false;
        if (other.getRequestTemplates() != null && other.getRequestTemplates().equals(this.getRequestTemplates()) == false)
            return false;
        if (other.getPassthroughBehavior() == null ^ this.getPassthroughBehavior() == null)
            return false;
        if (other.getPassthroughBehavior() != null && other.getPassthroughBehavior().equals(this.getPassthroughBehavior()) == false)
            return false;
        if (other.getContentHandling() == null ^ this.getContentHandling() == null)
            return false;
        if (other.getContentHandling() != null && other.getContentHandling().equals(this.getContentHandling()) == false)
            return false;
        if (other.getTimeoutInMillis() == null ^ this.getTimeoutInMillis() == null)
            return false;
        if (other.getTimeoutInMillis() != null && other.getTimeoutInMillis().equals(this.getTimeoutInMillis()) == false)
            return false;
        if (other.getCacheNamespace() == null ^ this.getCacheNamespace() == null)
            return false;
        if (other.getCacheNamespace() != null && other.getCacheNamespace().equals(this.getCacheNamespace()) == false)
            return false;
        if (other.getCacheKeyParameters() == null ^ this.getCacheKeyParameters() == null)
            return false;
        if (other.getCacheKeyParameters() != null && other.getCacheKeyParameters().equals(this.getCacheKeyParameters()) == false)
            return false;
        if (other.getIntegrationResponses() == null ^ this.getIntegrationResponses() == null)
            return false;
        if (other.getIntegrationResponses() != null && other.getIntegrationResponses().equals(this.getIntegrationResponses()) == false)
            return false;
        if (other.getTlsConfig() == null ^ this.getTlsConfig() == null)
            return false;
        if (other.getTlsConfig() != null && other.getTlsConfig().equals(this.getTlsConfig()) == false)
            return false;
        return true;
    }

    @Override
    public int hashCode() {
        final int prime = 31;
        int hashCode = 1;

        hashCode = prime * hashCode + ((getType() == null) ? 0 : getType().hashCode());
        hashCode = prime * hashCode + ((getHttpMethod() == null) ? 0 : getHttpMethod().hashCode());
        hashCode = prime * hashCode + ((getUri() == null) ? 0 : getUri().hashCode());
        hashCode = prime * hashCode + ((getConnectionType() == null) ? 0 : getConnectionType().hashCode());
        hashCode = prime * hashCode + ((getConnectionId() == null) ? 0 : getConnectionId().hashCode());
        hashCode = prime * hashCode + ((getCredentials() == null) ? 0 : getCredentials().hashCode());
        hashCode = prime * hashCode + ((getRequestParameters() == null) ? 0 : getRequestParameters().hashCode());
        hashCode = prime * hashCode + ((getRequestTemplates() == null) ? 0 : getRequestTemplates().hashCode());
        hashCode = prime * hashCode + ((getPassthroughBehavior() == null) ? 0 : getPassthroughBehavior().hashCode());
        hashCode = prime * hashCode + ((getContentHandling() == null) ? 0 : getContentHandling().hashCode());
        hashCode = prime * hashCode + ((getTimeoutInMillis() == null) ? 0 : getTimeoutInMillis().hashCode());
        hashCode = prime * hashCode + ((getCacheNamespace() == null) ? 0 : getCacheNamespace().hashCode());
        hashCode = prime * hashCode + ((getCacheKeyParameters() == null) ? 0 : getCacheKeyParameters().hashCode());
        hashCode = prime * hashCode + ((getIntegrationResponses() == null) ? 0 : getIntegrationResponses().hashCode());
        hashCode = prime * hashCode + ((getTlsConfig() == null) ? 0 : getTlsConfig().hashCode());
        return hashCode;
    }

    @Override
    public UpdateIntegrationResult clone() {
        try {
            return (UpdateIntegrationResult) super.clone();
        } catch (CloneNotSupportedException e) {
            throw new IllegalStateException("Got a CloneNotSupportedException from Object.clone() " + "even though we're Cloneable!", e);
        }
    }

}