/*
* Copyright 2018-2023 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.mediaconvert.model;
import java.io.Serializable;
import javax.annotation.Generated;
import com.amazonaws.protocol.StructuredPojo;
import com.amazonaws.protocol.ProtocolMarshaller;
/**
* These settings relate to the fragmented MP4 container for the segments in your DASH outputs.
*
* @see AWS API
* Documentation
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class MpdSettings implements Serializable, Cloneable, StructuredPojo {
/**
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover and
* play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you enable this
* setting, this is the markup that MediaConvert includes in your manifest:
*/
private String accessibilityCaptionHints;
/**
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match video
* duration. In all other cases, keep the default value, Default codec duration. When you choose Match video
* duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration
* of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the
* audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding
* or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding
* only to the end of the file. When you keep the default value, any minor discrepancies between audio and video
* duration will depend on your output audio codec.
*/
private String audioDuration;
/**
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar
* captions in a separate output from your audio and video. Choose Raw for captions in a single XML file in a raw
* container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented MP4 files. This set of
* fragmented MP4 files is separate from your video and audio fragmented MP4 files.
*/
private String captionContainerType;
/**
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert
* reads KLV metadata present in your input and writes each instance to a separate event message box in the output,
* according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.
*/
private String klvMetadata;
/**
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest
* metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same
* value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element
* schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set
* Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source
* to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.
*/
private String manifestMetadataSignaling;
/**
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this
* output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC
* XML.
*/
private String scte35Esam;
/**
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want
* SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those
* SCTE-35 markers in this output.
*/
private String scte35Source;
/**
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3
* metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To
* exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
*/
private String timedMetadata;
/**
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify
* Version 1, you must also set ID3 metadata to Passthrough.
*/
private String timedMetadataBoxVersion;
/**
* Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value:
* https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3
* metadata to Passthrough.
*/
private String timedMetadataSchemeIdUri;
/**
* Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also
* set ID3 metadata to Passthrough.
*/
private String timedMetadataValue;
/**
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover and
* play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you enable this
* setting, this is the markup that MediaConvert includes in your manifest:
*
* @param accessibilityCaptionHints
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover
* and play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you
* enable this setting, this is the markup that MediaConvert includes in your manifest:
* @see MpdAccessibilityCaptionHints
*/
public void setAccessibilityCaptionHints(String accessibilityCaptionHints) {
this.accessibilityCaptionHints = accessibilityCaptionHints;
}
/**
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover and
* play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you enable this
* setting, this is the markup that MediaConvert includes in your manifest:
*
* @return Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements
* for embedded 608 captions. This markup isn't generally required, but some video players require it to
* discover and play embedded 608 captions. Keep the default value, Exclude, to leave these elements out.
* When you enable this setting, this is the markup that MediaConvert includes in your manifest:
*
* @see MpdAccessibilityCaptionHints
*/
public String getAccessibilityCaptionHints() {
return this.accessibilityCaptionHints;
}
/**
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover and
* play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you enable this
* setting, this is the markup that MediaConvert includes in your manifest:
*
* @param accessibilityCaptionHints
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover
* and play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you
* enable this setting, this is the markup that MediaConvert includes in your manifest:
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdAccessibilityCaptionHints
*/
public MpdSettings withAccessibilityCaptionHints(String accessibilityCaptionHints) {
setAccessibilityCaptionHints(accessibilityCaptionHints);
return this;
}
/**
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover and
* play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you enable this
* setting, this is the markup that MediaConvert includes in your manifest:
*
* @param accessibilityCaptionHints
* Optional. Choose Include to have MediaConvert mark up your DASH manifest with elements for
* embedded 608 captions. This markup isn't generally required, but some video players require it to discover
* and play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you
* enable this setting, this is the markup that MediaConvert includes in your manifest:
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdAccessibilityCaptionHints
*/
public MpdSettings withAccessibilityCaptionHints(MpdAccessibilityCaptionHints accessibilityCaptionHints) {
this.accessibilityCaptionHints = accessibilityCaptionHints.toString();
return this;
}
/**
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match video
* duration. In all other cases, keep the default value, Default codec duration. When you choose Match video
* duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration
* of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the
* audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding
* or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding
* only to the end of the file. When you keep the default value, any minor discrepancies between audio and video
* duration will depend on your output audio codec.
*
* @param audioDuration
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match
* video duration. In all other cases, keep the default value, Default codec duration. When you choose Match
* video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the
* total duration of each audio stream is at least as long as the total duration of the video stream. After
* padding or trimming, the audio stream duration is no more than one frame longer than the video stream.
* MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For
* unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default
* value, any minor discrepancies between audio and video duration will depend on your output audio codec.
* @see MpdAudioDuration
*/
public void setAudioDuration(String audioDuration) {
this.audioDuration = audioDuration;
}
/**
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match video
* duration. In all other cases, keep the default value, Default codec duration. When you choose Match video
* duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration
* of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the
* audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding
* or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding
* only to the end of the file. When you keep the default value, any minor discrepancies between audio and video
* duration will depend on your output audio codec.
*
* @return Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match
* video duration. In all other cases, keep the default value, Default codec duration. When you choose Match
* video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the
* total duration of each audio stream is at least as long as the total duration of the video stream. After
* padding or trimming, the audio stream duration is no more than one frame longer than the video stream.
* MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For
* unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default
* value, any minor discrepancies between audio and video duration will depend on your output audio codec.
* @see MpdAudioDuration
*/
public String getAudioDuration() {
return this.audioDuration;
}
/**
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match video
* duration. In all other cases, keep the default value, Default codec duration. When you choose Match video
* duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration
* of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the
* audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding
* or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding
* only to the end of the file. When you keep the default value, any minor discrepancies between audio and video
* duration will depend on your output audio codec.
*
* @param audioDuration
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match
* video duration. In all other cases, keep the default value, Default codec duration. When you choose Match
* video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the
* total duration of each audio stream is at least as long as the total duration of the video stream. After
* padding or trimming, the audio stream duration is no more than one frame longer than the video stream.
* MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For
* unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default
* value, any minor discrepancies between audio and video duration will depend on your output audio codec.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdAudioDuration
*/
public MpdSettings withAudioDuration(String audioDuration) {
setAudioDuration(audioDuration);
return this;
}
/**
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match video
* duration. In all other cases, keep the default value, Default codec duration. When you choose Match video
* duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration
* of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the
* audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding
* or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding
* only to the end of the file. When you keep the default value, any minor discrepancies between audio and video
* duration will depend on your output audio codec.
*
* @param audioDuration
* Specify this setting only when your output will be consumed by a downstream repackaging workflow that is
* sensitive to very small duration differences between video and audio. For this situation, choose Match
* video duration. In all other cases, keep the default value, Default codec duration. When you choose Match
* video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the
* total duration of each audio stream is at least as long as the total duration of the video stream. After
* padding or trimming, the audio stream duration is no more than one frame longer than the video stream.
* MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For
* unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default
* value, any minor discrepancies between audio and video duration will depend on your output audio codec.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdAudioDuration
*/
public MpdSettings withAudioDuration(MpdAudioDuration audioDuration) {
this.audioDuration = audioDuration.toString();
return this;
}
/**
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar
* captions in a separate output from your audio and video. Choose Raw for captions in a single XML file in a raw
* container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented MP4 files. This set of
* fragmented MP4 files is separate from your video and audio fragmented MP4 files.
*
* @param captionContainerType
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify
* sidecar captions in a separate output from your audio and video. Choose Raw for captions in a single XML
* file in a raw container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented
* MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
* @see MpdCaptionContainerType
*/
public void setCaptionContainerType(String captionContainerType) {
this.captionContainerType = captionContainerType;
}
/**
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar
* captions in a separate output from your audio and video. Choose Raw for captions in a single XML file in a raw
* container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented MP4 files. This set of
* fragmented MP4 files is separate from your video and audio fragmented MP4 files.
*
* @return Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify
* sidecar captions in a separate output from your audio and video. Choose Raw for captions in a single XML
* file in a raw container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented
* MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
* @see MpdCaptionContainerType
*/
public String getCaptionContainerType() {
return this.captionContainerType;
}
/**
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar
* captions in a separate output from your audio and video. Choose Raw for captions in a single XML file in a raw
* container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented MP4 files. This set of
* fragmented MP4 files is separate from your video and audio fragmented MP4 files.
*
* @param captionContainerType
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify
* sidecar captions in a separate output from your audio and video. Choose Raw for captions in a single XML
* file in a raw container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented
* MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdCaptionContainerType
*/
public MpdSettings withCaptionContainerType(String captionContainerType) {
setCaptionContainerType(captionContainerType);
return this;
}
/**
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar
* captions in a separate output from your audio and video. Choose Raw for captions in a single XML file in a raw
* container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented MP4 files. This set of
* fragmented MP4 files is separate from your video and audio fragmented MP4 files.
*
* @param captionContainerType
* Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify
* sidecar captions in a separate output from your audio and video. Choose Raw for captions in a single XML
* file in a raw container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented
* MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdCaptionContainerType
*/
public MpdSettings withCaptionContainerType(MpdCaptionContainerType captionContainerType) {
this.captionContainerType = captionContainerType.toString();
return this;
}
/**
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert
* reads KLV metadata present in your input and writes each instance to a separate event message box in the output,
* according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.
*
* @param klvMetadata
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough.
* MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message
* box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to
* None or leave blank.
* @see MpdKlvMetadata
*/
public void setKlvMetadata(String klvMetadata) {
this.klvMetadata = klvMetadata;
}
/**
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert
* reads KLV metadata present in your input and writes each instance to a separate event message box in the output,
* according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.
*
* @return To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough.
* MediaConvert reads KLV metadata present in your input and writes each instance to a separate event
* message box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata
* insertion to None or leave blank.
* @see MpdKlvMetadata
*/
public String getKlvMetadata() {
return this.klvMetadata;
}
/**
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert
* reads KLV metadata present in your input and writes each instance to a separate event message box in the output,
* according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.
*
* @param klvMetadata
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough.
* MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message
* box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to
* None or leave blank.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdKlvMetadata
*/
public MpdSettings withKlvMetadata(String klvMetadata) {
setKlvMetadata(klvMetadata);
return this;
}
/**
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert
* reads KLV metadata present in your input and writes each instance to a separate event message box in the output,
* according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.
*
* @param klvMetadata
* To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough.
* MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message
* box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to
* None or leave blank.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdKlvMetadata
*/
public MpdSettings withKlvMetadata(MpdKlvMetadata klvMetadata) {
this.klvMetadata = klvMetadata.toString();
return this;
}
/**
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest
* metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same
* value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element
* schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set
* Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source
* to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.
*
* @param manifestMetadataSignaling
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set
* Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri
* will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the
* InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of
* your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata
* signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to
* Passthrough.
* @see MpdManifestMetadataSignaling
*/
public void setManifestMetadataSignaling(String manifestMetadataSignaling) {
this.manifestMetadataSignaling = manifestMetadataSignaling;
}
/**
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest
* metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same
* value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element
* schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set
* Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source
* to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.
*
* @return To add an InbandEventStream element in your output MPD manifest for each type of event message, set
* Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri
* will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the
* InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of
* your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata
* signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to
* Passthrough.
* @see MpdManifestMetadataSignaling
*/
public String getManifestMetadataSignaling() {
return this.manifestMetadataSignaling;
}
/**
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest
* metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same
* value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element
* schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set
* Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source
* to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.
*
* @param manifestMetadataSignaling
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set
* Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri
* will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the
* InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of
* your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata
* signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to
* Passthrough.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdManifestMetadataSignaling
*/
public MpdSettings withManifestMetadataSignaling(String manifestMetadataSignaling) {
setManifestMetadataSignaling(manifestMetadataSignaling);
return this;
}
/**
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest
* metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same
* value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element
* schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set
* Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source
* to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.
*
* @param manifestMetadataSignaling
* To add an InbandEventStream element in your output MPD manifest for each type of event message, set
* Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri
* will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the
* InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of
* your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata
* signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to
* Passthrough.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdManifestMetadataSignaling
*/
public MpdSettings withManifestMetadataSignaling(MpdManifestMetadataSignaling manifestMetadataSignaling) {
this.manifestMetadataSignaling = manifestMetadataSignaling.toString();
return this;
}
/**
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this
* output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC
* XML.
*
* @param scte35Esam
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in
* this output at the insertion points that you specify in an ESAM XML document. Provide the document in the
* setting SCC XML.
* @see MpdScte35Esam
*/
public void setScte35Esam(String scte35Esam) {
this.scte35Esam = scte35Esam;
}
/**
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this
* output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC
* XML.
*
* @return Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in
* this output at the insertion points that you specify in an ESAM XML document. Provide the document in the
* setting SCC XML.
* @see MpdScte35Esam
*/
public String getScte35Esam() {
return this.scte35Esam;
}
/**
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this
* output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC
* XML.
*
* @param scte35Esam
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in
* this output at the insertion points that you specify in an ESAM XML document. Provide the document in the
* setting SCC XML.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdScte35Esam
*/
public MpdSettings withScte35Esam(String scte35Esam) {
setScte35Esam(scte35Esam);
return this;
}
/**
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this
* output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC
* XML.
*
* @param scte35Esam
* Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in
* this output at the insertion points that you specify in an ESAM XML document. Provide the document in the
* setting SCC XML.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdScte35Esam
*/
public MpdSettings withScte35Esam(MpdScte35Esam scte35Esam) {
this.scte35Esam = scte35Esam.toString();
return this;
}
/**
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want
* SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those
* SCTE-35 markers in this output.
*
* @param scte35Source
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you
* want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't
* want those SCTE-35 markers in this output.
* @see MpdScte35Source
*/
public void setScte35Source(String scte35Source) {
this.scte35Source = scte35Source;
}
/**
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want
* SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those
* SCTE-35 markers in this output.
*
* @return Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you
* want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't
* want those SCTE-35 markers in this output.
* @see MpdScte35Source
*/
public String getScte35Source() {
return this.scte35Source;
}
/**
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want
* SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those
* SCTE-35 markers in this output.
*
* @param scte35Source
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you
* want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't
* want those SCTE-35 markers in this output.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdScte35Source
*/
public MpdSettings withScte35Source(String scte35Source) {
setScte35Source(scte35Source);
return this;
}
/**
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want
* SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those
* SCTE-35 markers in this output.
*
* @param scte35Source
* Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you
* want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't
* want those SCTE-35 markers in this output.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdScte35Source
*/
public MpdSettings withScte35Source(MpdScte35Source scte35Source) {
this.scte35Source = scte35Source.toString();
return this;
}
/**
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3
* metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To
* exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
*
* @param timedMetadata
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in
* Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event
* Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
* @see MpdTimedMetadata
*/
public void setTimedMetadata(String timedMetadata) {
this.timedMetadata = timedMetadata;
}
/**
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3
* metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To
* exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
*
* @return To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in
* Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event
* Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
* @see MpdTimedMetadata
*/
public String getTimedMetadata() {
return this.timedMetadata;
}
/**
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3
* metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To
* exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
*
* @param timedMetadata
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in
* Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event
* Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdTimedMetadata
*/
public MpdSettings withTimedMetadata(String timedMetadata) {
setTimedMetadata(timedMetadata);
return this;
}
/**
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3
* metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To
* exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
*
* @param timedMetadata
* To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in
* Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event
* Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdTimedMetadata
*/
public MpdSettings withTimedMetadata(MpdTimedMetadata timedMetadata) {
this.timedMetadata = timedMetadata.toString();
return this;
}
/**
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify
* Version 1, you must also set ID3 metadata to Passthrough.
*
* @param timedMetadataBoxVersion
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When
* you specify Version 1, you must also set ID3 metadata to Passthrough.
* @see MpdTimedMetadataBoxVersion
*/
public void setTimedMetadataBoxVersion(String timedMetadataBoxVersion) {
this.timedMetadataBoxVersion = timedMetadataBoxVersion;
}
/**
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify
* Version 1, you must also set ID3 metadata to Passthrough.
*
* @return Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When
* you specify Version 1, you must also set ID3 metadata to Passthrough.
* @see MpdTimedMetadataBoxVersion
*/
public String getTimedMetadataBoxVersion() {
return this.timedMetadataBoxVersion;
}
/**
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify
* Version 1, you must also set ID3 metadata to Passthrough.
*
* @param timedMetadataBoxVersion
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When
* you specify Version 1, you must also set ID3 metadata to Passthrough.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdTimedMetadataBoxVersion
*/
public MpdSettings withTimedMetadataBoxVersion(String timedMetadataBoxVersion) {
setTimedMetadataBoxVersion(timedMetadataBoxVersion);
return this;
}
/**
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify
* Version 1, you must also set ID3 metadata to Passthrough.
*
* @param timedMetadataBoxVersion
* Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When
* you specify Version 1, you must also set ID3 metadata to Passthrough.
* @return Returns a reference to this object so that method calls can be chained together.
* @see MpdTimedMetadataBoxVersion
*/
public MpdSettings withTimedMetadataBoxVersion(MpdTimedMetadataBoxVersion timedMetadataBoxVersion) {
this.timedMetadataBoxVersion = timedMetadataBoxVersion.toString();
return this;
}
/**
* Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value:
* https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3
* metadata to Passthrough.
*
* @param timedMetadataSchemeIdUri
* Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more
* information, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value:
* https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set
* ID3 metadata to Passthrough.
*/
public void setTimedMetadataSchemeIdUri(String timedMetadataSchemeIdUri) {
this.timedMetadataSchemeIdUri = timedMetadataSchemeIdUri;
}
/**
* Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value:
* https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3
* metadata to Passthrough.
*
* @return Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more
* information, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value:
* https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set
* ID3 metadata to Passthrough.
*/
public String getTimedMetadataSchemeIdUri() {
return this.timedMetadataSchemeIdUri;
}
/**
* Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value:
* https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3
* metadata to Passthrough.
*
* @param timedMetadataSchemeIdUri
* Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more
* information, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value:
* https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set
* ID3 metadata to Passthrough.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public MpdSettings withTimedMetadataSchemeIdUri(String timedMetadataSchemeIdUri) {
setTimedMetadataSchemeIdUri(timedMetadataSchemeIdUri);
return this;
}
/**
* Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also
* set ID3 metadata to Passthrough.
*
* @param timedMetadataValue
* Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value,
* you must also set ID3 metadata to Passthrough.
*/
public void setTimedMetadataValue(String timedMetadataValue) {
this.timedMetadataValue = timedMetadataValue;
}
/**
* Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also
* set ID3 metadata to Passthrough.
*
* @return Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value,
* you must also set ID3 metadata to Passthrough.
*/
public String getTimedMetadataValue() {
return this.timedMetadataValue;
}
/**
* Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information, see
* ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also
* set ID3 metadata to Passthrough.
*
* @param timedMetadataValue
* Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information,
* see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value,
* you must also set ID3 metadata to Passthrough.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public MpdSettings withTimedMetadataValue(String timedMetadataValue) {
setTimedMetadataValue(timedMetadataValue);
return this;
}
/**
* Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be
* redacted from this string using a placeholder value.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getAccessibilityCaptionHints() != null)
sb.append("AccessibilityCaptionHints: ").append(getAccessibilityCaptionHints()).append(",");
if (getAudioDuration() != null)
sb.append("AudioDuration: ").append(getAudioDuration()).append(",");
if (getCaptionContainerType() != null)
sb.append("CaptionContainerType: ").append(getCaptionContainerType()).append(",");
if (getKlvMetadata() != null)
sb.append("KlvMetadata: ").append(getKlvMetadata()).append(",");
if (getManifestMetadataSignaling() != null)
sb.append("ManifestMetadataSignaling: ").append(getManifestMetadataSignaling()).append(",");
if (getScte35Esam() != null)
sb.append("Scte35Esam: ").append(getScte35Esam()).append(",");
if (getScte35Source() != null)
sb.append("Scte35Source: ").append(getScte35Source()).append(",");
if (getTimedMetadata() != null)
sb.append("TimedMetadata: ").append(getTimedMetadata()).append(",");
if (getTimedMetadataBoxVersion() != null)
sb.append("TimedMetadataBoxVersion: ").append(getTimedMetadataBoxVersion()).append(",");
if (getTimedMetadataSchemeIdUri() != null)
sb.append("TimedMetadataSchemeIdUri: ").append(getTimedMetadataSchemeIdUri()).append(",");
if (getTimedMetadataValue() != null)
sb.append("TimedMetadataValue: ").append(getTimedMetadataValue());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof MpdSettings == false)
return false;
MpdSettings other = (MpdSettings) obj;
if (other.getAccessibilityCaptionHints() == null ^ this.getAccessibilityCaptionHints() == null)
return false;
if (other.getAccessibilityCaptionHints() != null && other.getAccessibilityCaptionHints().equals(this.getAccessibilityCaptionHints()) == false)
return false;
if (other.getAudioDuration() == null ^ this.getAudioDuration() == null)
return false;
if (other.getAudioDuration() != null && other.getAudioDuration().equals(this.getAudioDuration()) == false)
return false;
if (other.getCaptionContainerType() == null ^ this.getCaptionContainerType() == null)
return false;
if (other.getCaptionContainerType() != null && other.getCaptionContainerType().equals(this.getCaptionContainerType()) == false)
return false;
if (other.getKlvMetadata() == null ^ this.getKlvMetadata() == null)
return false;
if (other.getKlvMetadata() != null && other.getKlvMetadata().equals(this.getKlvMetadata()) == false)
return false;
if (other.getManifestMetadataSignaling() == null ^ this.getManifestMetadataSignaling() == null)
return false;
if (other.getManifestMetadataSignaling() != null && other.getManifestMetadataSignaling().equals(this.getManifestMetadataSignaling()) == false)
return false;
if (other.getScte35Esam() == null ^ this.getScte35Esam() == null)
return false;
if (other.getScte35Esam() != null && other.getScte35Esam().equals(this.getScte35Esam()) == false)
return false;
if (other.getScte35Source() == null ^ this.getScte35Source() == null)
return false;
if (other.getScte35Source() != null && other.getScte35Source().equals(this.getScte35Source()) == false)
return false;
if (other.getTimedMetadata() == null ^ this.getTimedMetadata() == null)
return false;
if (other.getTimedMetadata() != null && other.getTimedMetadata().equals(this.getTimedMetadata()) == false)
return false;
if (other.getTimedMetadataBoxVersion() == null ^ this.getTimedMetadataBoxVersion() == null)
return false;
if (other.getTimedMetadataBoxVersion() != null && other.getTimedMetadataBoxVersion().equals(this.getTimedMetadataBoxVersion()) == false)
return false;
if (other.getTimedMetadataSchemeIdUri() == null ^ this.getTimedMetadataSchemeIdUri() == null)
return false;
if (other.getTimedMetadataSchemeIdUri() != null && other.getTimedMetadataSchemeIdUri().equals(this.getTimedMetadataSchemeIdUri()) == false)
return false;
if (other.getTimedMetadataValue() == null ^ this.getTimedMetadataValue() == null)
return false;
if (other.getTimedMetadataValue() != null && other.getTimedMetadataValue().equals(this.getTimedMetadataValue()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getAccessibilityCaptionHints() == null) ? 0 : getAccessibilityCaptionHints().hashCode());
hashCode = prime * hashCode + ((getAudioDuration() == null) ? 0 : getAudioDuration().hashCode());
hashCode = prime * hashCode + ((getCaptionContainerType() == null) ? 0 : getCaptionContainerType().hashCode());
hashCode = prime * hashCode + ((getKlvMetadata() == null) ? 0 : getKlvMetadata().hashCode());
hashCode = prime * hashCode + ((getManifestMetadataSignaling() == null) ? 0 : getManifestMetadataSignaling().hashCode());
hashCode = prime * hashCode + ((getScte35Esam() == null) ? 0 : getScte35Esam().hashCode());
hashCode = prime * hashCode + ((getScte35Source() == null) ? 0 : getScte35Source().hashCode());
hashCode = prime * hashCode + ((getTimedMetadata() == null) ? 0 : getTimedMetadata().hashCode());
hashCode = prime * hashCode + ((getTimedMetadataBoxVersion() == null) ? 0 : getTimedMetadataBoxVersion().hashCode());
hashCode = prime * hashCode + ((getTimedMetadataSchemeIdUri() == null) ? 0 : getTimedMetadataSchemeIdUri().hashCode());
hashCode = prime * hashCode + ((getTimedMetadataValue() == null) ? 0 : getTimedMetadataValue().hashCode());
return hashCode;
}
@Override
public MpdSettings clone() {
try {
return (MpdSettings) super.clone();
} catch (CloneNotSupportedException e) {
throw new IllegalStateException("Got a CloneNotSupportedException from Object.clone() " + "even though we're Cloneable!", e);
}
}
@com.amazonaws.annotation.SdkInternalApi
@Override
public void marshall(ProtocolMarshaller protocolMarshaller) {
com.amazonaws.services.mediaconvert.model.transform.MpdSettingsMarshaller.getInstance().marshall(this, protocolMarshaller);
}
}