/*******************************************************************************
 *  Copyright 2012-2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *  Licensed under the Apache License, Version 2.0 (the "License"). You may not use
 *  this file except in compliance with the License. A copy of the License is located at
 *
 *  http://aws.amazon.com/apache2.0
 *
 *  or in the "license" file accompanying this file.
 *  This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
 *  CONDITIONS OF ANY KIND, either express or implied. See the License for the
 *  specific language governing permissions and limitations under the License.
 * *****************************************************************************
 *
 *  AWS Tools for Windows (TM) PowerShell (TM)
 *
 */

using System;
using System.Collections.Generic;
using System.Linq;
using System.Management.Automation;
using System.Text;
using Amazon.PowerShell.Common;
using Amazon.Runtime;
using Amazon.IdentityManagement;
using Amazon.IdentityManagement.Model;

namespace Amazon.PowerShell.Cmdlets.IAM
{
    /// <summary>
    /// Enables the specified MFA device and associates it with the specified IAM user. When
    /// enabled, the MFA device is required for every subsequent login by the IAM user associated
    /// with the device.
    /// </summary>
    [Cmdlet("Enable", "IAMMFADevice", SupportsShouldProcess = true, ConfirmImpact = ConfirmImpact.Medium)]
    [OutputType("None")]
    [AWSCmdlet("Calls the AWS Identity and Access Management EnableMFADevice API operation.", Operation = new[] {"EnableMFADevice"}, SelectReturnType = typeof(Amazon.IdentityManagement.Model.EnableMFADeviceResponse))]
    [AWSCmdletOutput("None or Amazon.IdentityManagement.Model.EnableMFADeviceResponse",
        "This cmdlet does not generate any output." +
        "The service response (type Amazon.IdentityManagement.Model.EnableMFADeviceResponse) can be referenced from properties attached to the cmdlet entry in the $AWSHistory stack."
    )]
    public partial class EnableIAMMFADeviceCmdlet : AmazonIdentityManagementServiceClientCmdlet, IExecutor
    {
        
        #region Parameter AuthenticationCode1
        /// <summary>
        /// <para>
        /// <para>An authentication code emitted by the device. </para><para>The format for this parameter is a string of six digits.</para><important><para>Submit your request immediately after generating the authentication codes. If you
        /// generate the codes and then wait too long to submit the request, the MFA device successfully
        /// associates with the user but the MFA device becomes out of sync. This happens because
        /// time-based one-time passwords (TOTP) expire after a short period of time. If this
        /// happens, you can <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_mfa_sync.html">resync
        /// the device</a>.</para></important>
        /// </para>
        /// </summary>
        #if !MODULAR
        [System.Management.Automation.Parameter(Position = 2, ValueFromPipelineByPropertyName = true)]
        #else
        [System.Management.Automation.Parameter(Position = 2, ValueFromPipelineByPropertyName = true, Mandatory = true)]
        [System.Management.Automation.AllowEmptyString]
        [System.Management.Automation.AllowNull]
        #endif
        [Amazon.PowerShell.Common.AWSRequiredParameter]
        public System.String AuthenticationCode1 { get; set; }
        #endregion
        
        #region Parameter AuthenticationCode2
        /// <summary>
        /// <para>
        /// <para>A subsequent authentication code emitted by the device.</para><para>The format for this parameter is a string of six digits.</para><important><para>Submit your request immediately after generating the authentication codes. If you
        /// generate the codes and then wait too long to submit the request, the MFA device successfully
        /// associates with the user but the MFA device becomes out of sync. This happens because
        /// time-based one-time passwords (TOTP) expire after a short period of time. If this
        /// happens, you can <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_mfa_sync.html">resync
        /// the device</a>.</para></important>
        /// </para>
        /// </summary>
        #if !MODULAR
        [System.Management.Automation.Parameter(Position = 3, ValueFromPipelineByPropertyName = true)]
        #else
        [System.Management.Automation.Parameter(Position = 3, ValueFromPipelineByPropertyName = true, Mandatory = true)]
        [System.Management.Automation.AllowEmptyString]
        [System.Management.Automation.AllowNull]
        #endif
        [Amazon.PowerShell.Common.AWSRequiredParameter]
        public System.String AuthenticationCode2 { get; set; }
        #endregion
        
        #region Parameter SerialNumber
        /// <summary>
        /// <para>
        /// <para>The serial number that uniquely identifies the MFA device. For virtual MFA devices,
        /// the serial number is the device ARN.</para><para>This parameter allows (through its <a href="http://wikipedia.org/wiki/regex">regex
        /// pattern</a>) a string of characters consisting of upper and lowercase alphanumeric
        /// characters with no spaces. You can also include any of the following characters: =,.@:/-</para>
        /// </para>
        /// </summary>
        #if !MODULAR
        [System.Management.Automation.Parameter(Position = 1, ValueFromPipelineByPropertyName = true)]
        #else
        [System.Management.Automation.Parameter(Position = 1, ValueFromPipelineByPropertyName = true, Mandatory = true)]
        [System.Management.Automation.AllowEmptyString]
        [System.Management.Automation.AllowNull]
        #endif
        [Amazon.PowerShell.Common.AWSRequiredParameter]
        public System.String SerialNumber { get; set; }
        #endregion
        
        #region Parameter UserName
        /// <summary>
        /// <para>
        /// <para>The name of the IAM user for whom you want to enable the MFA device.</para><para>This parameter allows (through its <a href="http://wikipedia.org/wiki/regex">regex
        /// pattern</a>) a string of characters consisting of upper and lowercase alphanumeric
        /// characters with no spaces. You can also include any of the following characters: _+=,.@-</para>
        /// </para>
        /// </summary>
        #if !MODULAR
        [System.Management.Automation.Parameter(Position = 0, ValueFromPipelineByPropertyName = true, ValueFromPipeline = true)]
        #else
        [System.Management.Automation.Parameter(Position = 0, ValueFromPipelineByPropertyName = true, ValueFromPipeline = true, Mandatory = true)]
        [System.Management.Automation.AllowEmptyString]
        [System.Management.Automation.AllowNull]
        #endif
        [Amazon.PowerShell.Common.AWSRequiredParameter]
        public System.String UserName { get; set; }
        #endregion
        
        #region Parameter Select
        /// <summary>
        /// Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
        /// Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.IdentityManagement.Model.EnableMFADeviceResponse).
        /// Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
        /// </summary>
        [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)]
        public string Select { get; set; } = "*";
        #endregion
        
        #region Parameter PassThru
        /// <summary>
        /// Changes the cmdlet behavior to return the value passed to the UserName parameter.
        /// The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.
        /// </summary>
        [System.Obsolete("The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.")]
        [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)]
        public SwitchParameter PassThru { get; set; }
        #endregion
        
        #region Parameter Force
        /// <summary>
        /// This parameter overrides confirmation prompts to force 
        /// the cmdlet to continue its operation. This parameter should always
        /// be used with caution.
        /// </summary>
        [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)]
        public SwitchParameter Force { get; set; }
        #endregion
        
        protected override void ProcessRecord()
        {
            this._AWSSignerType = "v4";
            base.ProcessRecord();
            
            var resourceIdentifiersText = FormatParameterValuesForConfirmationMsg(nameof(this.UserName), MyInvocation.BoundParameters);
            if (!ConfirmShouldProceed(this.Force.IsPresent, resourceIdentifiersText, "Enable-IAMMFADevice (EnableMFADevice)"))
            {
                return;
            }
            
            var context = new CmdletContext();
            
            // allow for manipulation of parameters prior to loading into context
            PreExecutionContextLoad(context);
            
            #pragma warning disable CS0618, CS0612 //A class member was marked with the Obsolete attribute
            if (ParameterWasBound(nameof(this.Select)))
            {
                context.Select = CreateSelectDelegate<Amazon.IdentityManagement.Model.EnableMFADeviceResponse, EnableIAMMFADeviceCmdlet>(Select) ??
                    throw new System.ArgumentException("Invalid value for -Select parameter.", nameof(this.Select));
                if (this.PassThru.IsPresent)
                {
                    throw new System.ArgumentException("-PassThru cannot be used when -Select is specified.", nameof(this.Select));
                }
            }
            else if (this.PassThru.IsPresent)
            {
                context.Select = (response, cmdlet) => this.UserName;
            }
            #pragma warning restore CS0618, CS0612 //A class member was marked with the Obsolete attribute
            context.AuthenticationCode1 = this.AuthenticationCode1;
            #if MODULAR
            if (this.AuthenticationCode1 == null && ParameterWasBound(nameof(this.AuthenticationCode1)))
            {
                WriteWarning("You are passing $null as a value for parameter AuthenticationCode1 which is marked as required. In case you believe this parameter was incorrectly marked as required, report this by opening an issue at https://github.com/aws/aws-tools-for-powershell/issues.");
            }
            #endif
            context.AuthenticationCode2 = this.AuthenticationCode2;
            #if MODULAR
            if (this.AuthenticationCode2 == null && ParameterWasBound(nameof(this.AuthenticationCode2)))
            {
                WriteWarning("You are passing $null as a value for parameter AuthenticationCode2 which is marked as required. In case you believe this parameter was incorrectly marked as required, report this by opening an issue at https://github.com/aws/aws-tools-for-powershell/issues.");
            }
            #endif
            context.SerialNumber = this.SerialNumber;
            #if MODULAR
            if (this.SerialNumber == null && ParameterWasBound(nameof(this.SerialNumber)))
            {
                WriteWarning("You are passing $null as a value for parameter SerialNumber which is marked as required. In case you believe this parameter was incorrectly marked as required, report this by opening an issue at https://github.com/aws/aws-tools-for-powershell/issues.");
            }
            #endif
            context.UserName = this.UserName;
            #if MODULAR
            if (this.UserName == null && ParameterWasBound(nameof(this.UserName)))
            {
                WriteWarning("You are passing $null as a value for parameter UserName which is marked as required. In case you believe this parameter was incorrectly marked as required, report this by opening an issue at https://github.com/aws/aws-tools-for-powershell/issues.");
            }
            #endif
            
            // allow further manipulation of loaded context prior to processing
            PostExecutionContextLoad(context);
            
            var output = Execute(context) as CmdletOutput;
            ProcessOutput(output);
        }
        
        #region IExecutor Members
        
        public object Execute(ExecutorContext context)
        {
            var cmdletContext = context as CmdletContext;
            // create request
            var request = new Amazon.IdentityManagement.Model.EnableMFADeviceRequest();
            
            if (cmdletContext.AuthenticationCode1 != null)
            {
                request.AuthenticationCode1 = cmdletContext.AuthenticationCode1;
            }
            if (cmdletContext.AuthenticationCode2 != null)
            {
                request.AuthenticationCode2 = cmdletContext.AuthenticationCode2;
            }
            if (cmdletContext.SerialNumber != null)
            {
                request.SerialNumber = cmdletContext.SerialNumber;
            }
            if (cmdletContext.UserName != null)
            {
                request.UserName = cmdletContext.UserName;
            }
            
            CmdletOutput output;
            
            // issue call
            var client = Client ?? CreateClient(_CurrentCredentials, _RegionEndpoint);
            try
            {
                var response = CallAWSServiceOperation(client, request);
                object pipelineOutput = null;
                pipelineOutput = cmdletContext.Select(response, this);
                output = new CmdletOutput
                {
                    PipelineOutput = pipelineOutput,
                    ServiceResponse = response
                };
            }
            catch (Exception e)
            {
                output = new CmdletOutput { ErrorResponse = e };
            }
            
            return output;
        }
        
        public ExecutorContext CreateContext()
        {
            return new CmdletContext();
        }
        
        #endregion
        
        #region AWS Service Operation Call
        
        private Amazon.IdentityManagement.Model.EnableMFADeviceResponse CallAWSServiceOperation(IAmazonIdentityManagementService client, Amazon.IdentityManagement.Model.EnableMFADeviceRequest request)
        {
            Utils.Common.WriteVerboseEndpointMessage(this, client.Config, "AWS Identity and Access Management", "EnableMFADevice");
            try
            {
                #if DESKTOP
                return client.EnableMFADevice(request);
                #elif CORECLR
                return client.EnableMFADeviceAsync(request).GetAwaiter().GetResult();
                #else
                        #error "Unknown build edition"
                #endif
            }
            catch (AmazonServiceException exc)
            {
                var webException = exc.InnerException as System.Net.WebException;
                if (webException != null)
                {
                    throw new Exception(Utils.Common.FormatNameResolutionFailureMessage(client.Config, webException.Message), webException);
                }
                throw;
            }
        }
        
        #endregion
        
        internal partial class CmdletContext : ExecutorContext
        {
            public System.String AuthenticationCode1 { get; set; }
            public System.String AuthenticationCode2 { get; set; }
            public System.String SerialNumber { get; set; }
            public System.String UserName { get; set; }
            public System.Func<Amazon.IdentityManagement.Model.EnableMFADeviceResponse, EnableIAMMFADeviceCmdlet, object> Select { get; set; } =
                (response, cmdlet) => null;
        }
        
    }
}