/*
* Copyright 2017-2020 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v7.0
processor: LPC54018
package_id: LPC54018JET180
mcu_data: ksdk2_0
processor_version: 7.0.1
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
#include "fsl_common.h"
#include "fsl_iocon.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
BOARD_InitPins();
}
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!< Enables digital function */
#define IOCON_PIO_FUNC0 0x00u /*!< Selects pin function 0 */
#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */
#define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */
#define IOCON_PIO_INPFILT_OFF 0x0200u /*!< Input filter disabled */
#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */
#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */
#define IOCON_PIO_MODE_PULLUP 0x20u /*!< Selects pull-up function */
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */
#define IOCON_PIO_SLEW_FAST 0x0400u /*!< Fast mode, slew rate control is disabled */
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */
#define PIN8_IDX 8u /*!< Pin number for pin 8 in a port 4 */
#define PIN10_IDX 10u /*!< Pin number for pin 10 in a port 4 */
#define PIN11_IDX 11u /*!< Pin number for pin 11 in a port 4 */
#define PIN12_IDX 12u /*!< Pin number for pin 12 in a port 4 */
#define PIN13_IDX 13u /*!< Pin number for pin 13 in a port 4 */
#define PIN14_IDX 14u /*!< Pin number for pin 14 in a port 4 */
#define PIN15_IDX 15u /*!< Pin number for pin 15 in a port 4 */
#define PIN16_IDX 16u /*!< Pin number for pin 16 in a port 4 */
#define PIN17_IDX 17u /*!< Pin number for pin 17 in a port 0 */
#define PIN26_IDX 26u /*!< Pin number for pin 26 in a port 2 */
#define PIN29_IDX 29u /*!< Pin number for pin 29 in a port 0 */
#define PIN30_IDX 30u /*!< Pin number for pin 30 in a port 0 */
#define PORT0_IDX 0u /*!< Port index */
#define PORT2_IDX 2u /*!< Port index */
#define PORT4_IDX 4u /*!< Port index */
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: B13, peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI/CTIMER2_MAT3/SCT0_OUT8/TRACEDATA(2), mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
- {pin_num: A2, peripheral: FLEXCOMM0, signal: TXD_SCL_MISO, pin_signal: PIO0_30/FC0_TXD_SCL_MISO/CTIMER0_MAT0/SCT0_OUT9/TRACEDATA(1), mode: inactive, invert: disabled,
glitch_filter: disabled, slew_rate: standard, open_drain: disabled}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
/* Function assigned for the Cortex-M4F */
void BOARD_InitPins(void)
{
CLOCK_EnableClock(kCLOCK_Iocon); /* Enables the clock for the IOCON block. 0 = Disable; 1 = Enable.: 0x01u */
const uint32_t port0_pin17_config = (
IOCON_PIO_FUNC7 | /* Pin is configured as ENET_TXD1 */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT0_IDX, PIN17_IDX, port0_pin17_config); /* PORT0 PIN17 (coords: E14) is configured as ENET_TXD1 */
const uint32_t port0_pin29_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as FC0_RXD_SDA_MOSI */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT0_IDX, PIN29_IDX, port0_pin29_config); /* PORT0 PIN29 (coords: B13) is configured as FC0_RXD_SDA_MOSI */
const uint32_t port0_pin30_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as FC0_TXD_SCL_MISO */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT0_IDX, PIN30_IDX, port0_pin30_config); /* PORT0 PIN30 (coords: A2) is configured as FC0_TXD_SCL_MISO */
const uint32_t port2_pin26_config = (
IOCON_PIO_FUNC0 | /* Pin is configured as PIO2_26 */
IOCON_PIO_MODE_PULLUP | /* Selects pull-up function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN26_IDX, port2_pin26_config); /* PORT2 PIN26 (coords: H11) is configured as PIO2_26 */
const uint32_t port4_pin10_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RX_DV */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN10_IDX, port4_pin10_config); /* PORT4 PIN10 (coords: B9) is configured as ENET_RX_DV */
const uint32_t port4_pin11_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RXD0 */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN11_IDX, port4_pin11_config); /* PORT4 PIN11 (coords: A9) is configured as ENET_RXD0 */
const uint32_t port4_pin12_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RXD1 */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN12_IDX, port4_pin12_config); /* PORT4 PIN12 (coords: A6) is configured as ENET_RXD1 */
const uint32_t port4_pin13_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_TX_EN */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN13_IDX, port4_pin13_config); /* PORT4 PIN13 (coords: B6) is configured as ENET_TX_EN */
const uint32_t port4_pin14_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RX_CLK */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN14_IDX, port4_pin14_config); /* PORT4 PIN14 (coords: B5) is configured as ENET_RX_CLK */
const uint32_t port4_pin15_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_MDC */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN15_IDX, port4_pin15_config); /* PORT4 PIN15 (coords: A4) is configured as ENET_MDC */
const uint32_t port4_pin16_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_MDIO */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN16_IDX, port4_pin16_config); /* PORT4 PIN16 (coords: C4) is configured as ENET_MDIO */
const uint32_t port4_pin8_config = (
IOCON_PIO_FUNC1 | /* Pin is configured as ENET_TXD0 */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN8_IDX, port4_pin8_config); /* PORT4 PIN8 (coords: B14) is configured as ENET_TXD0 */
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/