/******************************************************************************
*
* Copyright (C) 2013 - 2015 Xilinx, Inc. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xsdps.c
* @addtogroup sdps_v2_5
* @{
*
* Contains the interface functions of the XSdPs driver.
* See xsdps.h for a detailed description of the device and driver.
*
*
* MODIFICATION HISTORY:
*
* Ver Who Date Changes
* ----- --- -------- -----------------------------------------------
* 1.00a hk/sg 10/17/13 Initial release
* 2.0 hk 12/13/13 Added check for arm to use sleep.h and its API's
* 2.1 hk 04/18/14 Add sleep for microblaze designs. CR# 781117.
* 2.2 hk 07/28/14 Make changes to enable use of data cache.
* 2.3 sk 09/23/14 Send command for relative card address
* when re-initialization is done.CR# 819614.
* Use XSdPs_Change_ClkFreq API whenever changing
* clock.CR# 816586.
* 2.4 sk 12/04/14 Added support for micro SD without
* WP/CD. CR# 810655.
* Checked for DAT Inhibit mask instead of CMD
* Inhibit mask in Cmd Transfer API.
* Added Support for SD Card v1.0
* 2.5 sg 07/09/15 Added SD 3.0 features
* kvn 07/15/15 Modified the code according to MISRAC-2012.
* 2.6 sk 10/12/15 Added support for SD card v1.0 CR# 840601.
*
*
******************************************************************************/
/***************************** Include Files *********************************/
#include "xsdps.h"
#include "xsdps_info.h"
#include "xil_cache.h"
/*
* The header sleep.h and API usleep() can only be used with an arm design.
* MB_Sleep() is used for microblaze design.
*/
#ifdef __arm__
#include "sleep.h"
#endif
#ifdef __MICROBLAZE__
#include "microblaze_sleep.h"
#endif
#include
#include "task.h"
#include "FreeRTOSFATConfig.h"
#include "uncached_memory.h"
#include "hr_gettime.h"
/************************** Constant Definitions *****************************/
#define XSDPS_CMD8_VOL_PATTERN 0x1AAU
#define XSDPS_RESPOCR_READY 0x80000000U
#define XSDPS_ACMD41_HCS 0x40000000U
#define XSDPS_ACMD41_3V3 0x00300000U
#define XSDPS_CMD1_HIGH_VOL 0x00FF8000U
#define XSDPS_CMD1_DUAL_VOL 0x00FF8010U
#define HIGH_SPEED_SUPPORT 0x2U
#define WIDTH_4_BIT_SUPPORT 0x4U
#define SD_CLK_25_MHZ 25000000U
#define SD_CLK_26_MHZ 26000000U
#define EXT_CSD_DEVICE_TYPE_BYTE 196U
#define EXT_CSD_DEVICE_TYPE_HIGH_SPEED 0x2U
#define EXT_CSD_DEVICE_TYPE_DDR_1V8_HIGH_SPEED 0x4U
#define EXT_CSD_DEVICE_TYPE_DDR_1V2_HIGH_SPEED 0x8U
#define EXT_CSD_DEVICE_TYPE_SDR_1V8_HS200 0x10U
#define EXT_CSD_DEVICE_TYPE_SDR_1V2_HS200 0x20U
/* Note: Remove this once fixed */
#define UHS_BROKEN
#ifndef ffconfigWRITE_PAUSE_USEC
#define ffconfigWRITE_PAUSE_USEC 500UL
#endif
/**************************** Type Definitions *******************************/
/************************** Function Prototypes ******************************/
u32 XSdPs_FrameCmd( XSdPs * InstancePtr,
u32 Cmd );
s32 XSdPs_CmdTransfer( XSdPs * InstancePtr,
u32 Cmd,
u32 Arg,
u32 BlkCnt );
void XSdPs_SetupADMA2DescTbl( XSdPs * InstancePtr,
u32 BlkCnt,
const u8 * Buff );
extern s32 XSdPs_Uhs_ModeInit( XSdPs * InstancePtr,
u8 Mode );
static s32 XSdPs_IdentifyCard( XSdPs * InstancePtr );
#ifndef UHS_BROKEN
static s32 XSdPs_Switch_Voltage( XSdPs * InstancePtr );
#endif
#if ( ffconfigSDIO_DRIVER_USES_INTERRUPT != 0 )
/* Declared in ff_sddisk.c :
* Function will sleep and get interrupted on a change of
* the status register. It will loop until:
* 1. Expected bit (ulMask) becomes high
* 2. Time-out reached (normally 2 seconds)
*/
extern u32 XSdPs_WaitInterrupt( XSdPs * InstancePtr,
u32 ulMask,
u32 ulWait );
/* Clear the interrupt before using it. */
extern void XSdPs_ClearInterrupt( XSdPs * InstancePtr );
#else
#error Please define ffconfigSDIO_DRIVER_USES_INTERRUPT
#endif
/*****************************************************************************/
/**
*
* Initializes a specific XSdPs instance such that the driver is ready to use.
*
*
* @param InstancePtr is a pointer to the XSdPs instance.
* @param ConfigPtr is a reference to a structure containing information
* about a specific SD device. This function initializes an
* InstancePtr object for a specific device specified by the
* contents of Config.
* @param EffectiveAddr is the device base address in the virtual memory
* address space. The caller is responsible for keeping the address
* mapping from EffectiveAddr to the device physical base address
* unchanged once this function is invoked. Unexpected errors may
* occur if the address mapping changes after this function is
* called. If address translation is not used, use
* ConfigPtr->Config.BaseAddress for this device.
*
* @return
* - XST_SUCCESS if successful.
* - XST_DEVICE_IS_STARTED if the device is already started.
* It must be stopped to re-initialize.
*
* @note This function initializes the host controller.
* Initial clock of 400KHz is set.
* Voltage of 3.3V is selected as that is supported by host.
* Interrupts status is enabled and signal disabled by default.
* Default data direction is card to host and
* 32 bit ADMA2 is selected. Default Block size is 512 bytes.
*
******************************************************************************/
s32 XSdPs_CfgInitialize( XSdPs * InstancePtr,
XSdPs_Config * ConfigPtr,
u32 EffectiveAddr )
{
s32 Status;
u8 PowerLevel;
Xil_AssertNonvoid( InstancePtr != NULL );
Xil_AssertNonvoid( ConfigPtr != NULL );
/* Set some default values. */
InstancePtr->Config.BaseAddress = EffectiveAddr;
InstancePtr->Config.InputClockHz = ConfigPtr->InputClockHz;
InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
InstancePtr->Config.CardDetect = ConfigPtr->CardDetect;
InstancePtr->Config.WriteProtect = ConfigPtr->WriteProtect;
/* Disable bus power */
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress,
XSDPS_POWER_CTRL_OFFSET, 0U );
vTaskDelay( pdMS_TO_TICKS( 1000UL ) );
/* "Software reset for all" is initiated */
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress, XSDPS_SW_RST_OFFSET,
XSDPS_SWRST_ALL_MASK );
/*
* Proceed with initialization only after reset is complete
*/
while( XSdPs_ReadReg8( InstancePtr->Config.BaseAddress,
XSDPS_SW_RST_OFFSET ) & XSDPS_SWRST_ALL_MASK )
{
}
/* Host Controller version is read. */
InstancePtr->HC_Version =
( u8 ) ( XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_HOST_CTRL_VER_OFFSET ) & XSDPS_HC_SPEC_VER_MASK );
/*
* Read capabilities register and update it in Instance pointer.
* It is sufficient to read this once on power on.
*/
InstancePtr->Host_Caps = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_CAPS_OFFSET );
/* Select voltage and enable bus power. */
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress,
XSDPS_POWER_CTRL_OFFSET,
XSDPS_PC_BUS_VSEL_3V3_MASK | XSDPS_PC_BUS_PWR_MASK );
/* Change the clock frequency to 400 KHz */
Status = XSdPs_Change_ClkFreq( InstancePtr, XSDPS_CLK_400_KHZ );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( ( InstancePtr->Host_Caps & XSDPS_CAP_VOLT_3V3_MASK ) != 0U )
{
PowerLevel = XSDPS_PC_BUS_VSEL_3V3_MASK;
}
else if( ( InstancePtr->Host_Caps & XSDPS_CAP_VOLT_3V0_MASK ) != 0U )
{
PowerLevel = XSDPS_PC_BUS_VSEL_3V0_MASK;
}
else if( ( InstancePtr->Host_Caps & XSDPS_CAP_VOLT_1V8_MASK ) != 0U )
{
PowerLevel = XSDPS_PC_BUS_VSEL_1V8_MASK;
}
else
{
PowerLevel = 0U;
}
/* Select voltage based on capability and enable bus power. */
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress,
XSDPS_POWER_CTRL_OFFSET,
PowerLevel | XSDPS_PC_BUS_PWR_MASK );
/* Enable ADMA2 in 64bit mode. */
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress,
XSDPS_HOST_CTRL1_OFFSET,
XSDPS_HC_DMA_ADMA2_32_MASK );
/* Enable all interrupt status except card interrupt initially */
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_NORM_INTR_STS_EN_OFFSET,
XSDPS_NORM_INTR_ALL_MASK & ( ~XSDPS_INTR_CARD_MASK ) );
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_ERR_INTR_STS_EN_OFFSET,
XSDPS_ERROR_INTR_ALL_MASK );
/* Disable all interrupt signals by default. */
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_NORM_INTR_SIG_EN_OFFSET, 0x0U );
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_ERR_INTR_SIG_EN_OFFSET, 0x0U );
/*
* Transfer mode register - default value
* DMA enabled, block count enabled, data direction card to host(read)
*/
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_XFER_MODE_OFFSET,
XSDPS_TM_DMA_EN_MASK | XSDPS_TM_BLK_CNT_EN_MASK |
XSDPS_TM_DAT_DIR_SEL_MASK );
/* Set block size to 512 by default */
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_BLK_SIZE_OFFSET, XSDPS_BLK_SIZE_512_MASK );
Status = XST_SUCCESS;
RETURN_PATH:
return Status;
}
/*****************************************************************************/
/**
* SD initialization is done in this function
*
*
* @param InstancePtr is a pointer to the instance to be worked on.
*
* @return
* - XST_SUCCESS if initialization was successful
* - XST_FAILURE if failure - could be because
* a) SD is already initialized
* b) There is no card inserted
* c) One of the steps (commands) in the
* initialization cycle failed
*
* @note This function initializes the SD card by following its
* initialization and identification state diagram.
* CMD0 is sent to reset card.
* CMD8 and ACDM41 are sent to identify voltage and
* high capacity support
* CMD2 and CMD3 are sent to obtain Card ID and
* Relative card address respectively.
* CMD9 is sent to read the card specific data.
*
******************************************************************************/
s32 XSdPs_SdCardInitialize( XSdPs * InstancePtr )
{
u32 PresentStateReg;
s32 Status;
u32 RespOCR;
u32 CSD[ 4 ];
u32 Arg;
u8 ReadReg;
Xil_AssertNonvoid( InstancePtr != NULL );
Xil_AssertNonvoid( InstancePtr->IsReady == XIL_COMPONENT_IS_READY );
if( InstancePtr->Config.CardDetect != 0U )
{
/*
* Check the present state register to make sure
* card is inserted and detected by host controller
*/
PresentStateReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
if( ( PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK ) == 0U )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
/* CMD0 no response expected */
Status = XSdPs_CmdTransfer( InstancePtr, ( u32 ) CMD0, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/*
* CMD8; response expected
* 0x1AA - Supply Voltage 2.7 - 3.6V and AA is pattern
*/
Status = XSdPs_CmdTransfer( InstancePtr, CMD8,
XSDPS_CMD8_VOL_PATTERN, 0U );
if( ( Status != XST_SUCCESS ) && ( Status != XSDPS_CT_ERROR ) )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( Status == XSDPS_CT_ERROR )
{
/* "Software reset for all" is initiated */
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress, XSDPS_SW_RST_OFFSET,
XSDPS_SWRST_CMD_LINE_MASK );
/* Proceed with initialization only after reset is complete */
ReadReg = XSdPs_ReadReg8( InstancePtr->Config.BaseAddress,
XSDPS_SW_RST_OFFSET );
while( ( ReadReg & XSDPS_SWRST_CMD_LINE_MASK ) != 0U )
{
ReadReg = XSdPs_ReadReg8( InstancePtr->Config.BaseAddress,
XSDPS_SW_RST_OFFSET );
}
}
RespOCR = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET );
if( RespOCR != XSDPS_CMD8_VOL_PATTERN )
{
InstancePtr->Card_Version = XSDPS_SD_VER_1_0;
}
else
{
InstancePtr->Card_Version = XSDPS_SD_VER_2_0;
}
RespOCR = 0U;
/* Send ACMD41 while card is still busy with power up */
while( ( RespOCR & XSDPS_RESPOCR_READY ) == 0U )
{
Status = XSdPs_CmdTransfer( InstancePtr, CMD55, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Arg = XSDPS_ACMD41_HCS | XSDPS_ACMD41_3V3 | ( 0x1FFU << 15U );
if( InstancePtr->HC_Version == XSDPS_HC_SPEC_V3 )
{
Arg |= XSDPS_OCR_S18;
}
/* 0x40300000 - Host High Capacity support & 3.3V window */
Status = XSdPs_CmdTransfer( InstancePtr, ACMD41,
Arg, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Response with card capacity */
RespOCR = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET );
}
/* Update HCS support flag based on card capacity response */
if( ( RespOCR & XSDPS_ACMD41_HCS ) != 0U )
{
InstancePtr->HCS = 1U;
}
/* There is no support to switch to 1.8V and use UHS mode on 1.0 silicon */
#ifndef UHS_BROKEN
if( ( RespOCR & XSDPS_OCR_S18 ) != 0U )
{
InstancePtr->Switch1v8 = 1U;
Status = XSdPs_Switch_Voltage( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
#endif /* ifndef UHS_BROKEN */
/* CMD2 for Card ID */
Status = XSdPs_CmdTransfer( InstancePtr, CMD2, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
InstancePtr->CardID[ 0 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP0_OFFSET );
InstancePtr->CardID[ 1 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP1_OFFSET );
InstancePtr->CardID[ 2 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP2_OFFSET );
InstancePtr->CardID[ 3 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP3_OFFSET );
do
{
Status = XSdPs_CmdTransfer( InstancePtr, CMD3, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/*
* Relative card address is stored as the upper 16 bits
* This is to avoid shifting when sending commands
*/
InstancePtr->RelCardAddr =
XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET ) & 0xFFFF0000U;
} while( InstancePtr->RelCardAddr == 0U );
Status = XSdPs_CmdTransfer( InstancePtr, CMD9, ( InstancePtr->RelCardAddr ), 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
{
u32 resp[ 4 ];
/* Put the CSD data in a standard order and analyse them */
resp[ 0 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP0_OFFSET );
resp[ 1 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP1_OFFSET );
resp[ 2 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP2_OFFSET );
resp[ 3 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress, XSDPS_RESP3_OFFSET );
CSD[ 0 ] = ( resp[ 3 ] << 8 ) | ( resp[ 2 ] >> 24 );
CSD[ 1 ] = ( resp[ 2 ] << 8 ) | ( resp[ 1 ] >> 24 );
CSD[ 2 ] = ( resp[ 1 ] << 8 ) | ( resp[ 0 ] >> 24 );
CSD[ 3 ] = ( resp[ 0 ] << 8 );
FF_PRINTF( "CSD %08lX %08lX %08lX %08lX\n", CSD[ 0 ], CSD[ 1 ], CSD[ 2 ], CSD[ 3 ] );
sd_decode_csd( &myCSD, ( u32 * ) CSD );
}
{
u32 resp[ 4 ];
/* When analysing the Card ID (CID), a field in CSD must be known: mmca_vsn. */
resp[ 0 ] = ( InstancePtr->CardID[ 3 ] >> 8 );
resp[ 1 ] = ( InstancePtr->CardID[ 3 ] << 24 ) | ( InstancePtr->CardID[ 2 ] >> 8 );
resp[ 2 ] = ( InstancePtr->CardID[ 2 ] << 24 ) | ( InstancePtr->CardID[ 1 ] >> 8 );
resp[ 3 ] = ( InstancePtr->CardID[ 1 ] << 24 ) | ( InstancePtr->CardID[ 0 ] >> 8 );
FF_PRINTF( "CID %08X %08X %08X %08X\n",
( unsigned ) resp[ 0 ],
( unsigned ) resp[ 1 ],
( unsigned ) resp[ 2 ],
( unsigned ) resp[ 3 ] );
mmc_decode_cid( &myCSD, &myCID, resp );
}
Status = XST_SUCCESS;
RETURN_PATH:
return Status;
}
/*
* This driver will hang if the SD-card gets extracted while doing i/o.
* The driver waits for either 'XSDPS_INTR_CC_MASK', 'XSDPS_INTR_TC_MASK',
* or 'XSDPS_INTR_ERR_MASK'.
* None of the bits will ever get set and the program gets stuck here.
* The number of polls will be counted, and when a high number is reached,
* an error will be returned.
* This time-out will happen after about 2 seconds.
*
* A better solution is to define 'ffconfigSDIO_DRIVER_USES_INTERRUPT'. The CPU
* won't poll and the task will block while the MMC peripheral is working.
*/
#if ( ffconfigSDIO_DRIVER_USES_INTERRUPT == 0 )
#define POLLCOUNT_MAX 0x800000
#endif
/*****************************************************************************/
/**
*
* Initialize Card with Identification mode sequence
*
*
* @param InstancePtr is a pointer to the instance to be worked on.
*
* @return
* - XST_SUCCESS if initialization was successful
* - XST_FAILURE if failure - could be because
* a) SD is already initialized
* b) There is no card inserted
* c) One of the steps (commands) in the
* initialization cycle failed
*
*
******************************************************************************/
s32 XSdPs_CardInitialize( XSdPs * InstancePtr )
{
#ifdef __ICCARM__
#pragma data_alignment = 32
static u8 ExtCsd[ 512 ];
#pragma data_alignment = 4
#else
static u8 ExtCsd[ 512 ] __attribute__( ( aligned( 32 ) ) );
#endif
u8 SCR[ 8 ] = { 0U };
u8 ReadBuff[ 64 ] = { 0U };
s32 Status;
Xil_AssertNonvoid( InstancePtr != NULL );
Xil_AssertNonvoid( InstancePtr->IsReady == XIL_COMPONENT_IS_READY );
/* Default settings */
InstancePtr->BusWidth = XSDPS_1_BIT_WIDTH;
InstancePtr->CardType = XSDPS_CARD_SD;
InstancePtr->Switch1v8 = 0U;
InstancePtr->BusSpeed = XSDPS_CLK_400_KHZ;
if( ( InstancePtr->HC_Version == XSDPS_HC_SPEC_V3 ) &&
( ( InstancePtr->Host_Caps & XSDPS_CAPS_SLOT_TYPE_MASK )
== XSDPS_CAPS_EMB_SLOT ) )
{
InstancePtr->CardType = XSDPS_CHIP_EMMC;
}
else
{
Status = XSdPs_IdentifyCard( InstancePtr );
if( Status == XST_FAILURE )
{
goto RETURN_PATH;
}
}
if( ( InstancePtr->CardType != XSDPS_CARD_SD ) &&
( InstancePtr->CardType != XSDPS_CARD_MMC ) &&
( InstancePtr->CardType != XSDPS_CHIP_EMMC ) )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( InstancePtr->CardType == XSDPS_CARD_SD )
{
Status = XSdPs_SdCardInitialize( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Change clock to default clock 25MHz */
InstancePtr->BusSpeed = SD_CLK_25_MHZ;
Status = XSdPs_Change_ClkFreq( InstancePtr, InstancePtr->BusSpeed );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
else if( ( InstancePtr->CardType == XSDPS_CARD_MMC ) ||
( InstancePtr->CardType == XSDPS_CHIP_EMMC ) )
{
Status = XSdPs_MmcCardInitialize( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Change clock to default clock 26MHz */
InstancePtr->BusSpeed = SD_CLK_26_MHZ;
Status = XSdPs_Change_ClkFreq( InstancePtr, InstancePtr->BusSpeed );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
else
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Status = XSdPs_Select_Card( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( InstancePtr->CardType == XSDPS_CARD_SD )
{
/* Pull-up disconnected during data transfer */
Status = XSdPs_Pullup( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Status = XSdPs_Get_BusWidth( InstancePtr, SCR );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( ( SCR[ 1 ] & WIDTH_4_BIT_SUPPORT ) != 0U )
{
Status = XSdPs_Change_BusWidth( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
if( ( InstancePtr->Switch1v8 != 0U ) &&
( InstancePtr->BusWidth == XSDPS_4_BIT_WIDTH ) )
{
/* Set UHS-I SDR104 mode */
Status = XSdPs_Uhs_ModeInit( InstancePtr,
XSDPS_UHS_SPEED_MODE_SDR104 );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
else
{
/*
* card supports CMD6 when SD_SPEC field in SCR register
* indicates that the Physical Layer Specification Version
* is 1.10 or later. So for SD v1.0 cmd6 is not supported.
*/
if( SCR[ 0 ] != 0U )
{
/* Get speed supported by device */
Status = XSdPs_Get_BusSpeed( InstancePtr, ReadBuff );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
FF_PRINTF( "SD-card seems OK but 4-bits doesn't work. Dirty contacts ?\n" );
FF_PRINTF( "Or: SD-card has version v1.0 which does not support cmd6 ?\n" );
goto RETURN_PATH;
}
/* Check for high speed support */
if( ( ReadBuff[ 13 ] & HIGH_SPEED_SUPPORT ) != 0U )
{
Status = XSdPs_Change_BusSpeed( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
}
}
}
else if( ( InstancePtr->CardType == XSDPS_CARD_MMC ) &&
( InstancePtr->HC_Version == XSDPS_HC_SPEC_V2 ) )
{
Status = XSdPs_Change_BusWidth( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Status = XSdPs_Get_Mmc_ExtCsd( InstancePtr, ExtCsd );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( ExtCsd[ EXT_CSD_BUS_WIDTH_BYTE ] != EXT_CSD_BUS_WIDTH_4_BIT )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( ( ExtCsd[ EXT_CSD_DEVICE_TYPE_BYTE ] &
EXT_CSD_DEVICE_TYPE_HIGH_SPEED ) != 0U )
{
Status = XSdPs_Change_BusSpeed( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Status = XSdPs_Get_Mmc_ExtCsd( InstancePtr, ExtCsd );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( ExtCsd[ EXT_CSD_HS_TIMING_BYTE ] != EXT_CSD_HS_TIMING_HIGH )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
}
else if( InstancePtr->CardType == XSDPS_CHIP_EMMC )
{
/* Change bus width to 8-bit */
Status = XSdPs_Change_BusWidth( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Get Extended CSD */
Status = XSdPs_Get_Mmc_ExtCsd( InstancePtr, ExtCsd );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Check for 8-bit support */
if( ExtCsd[ EXT_CSD_BUS_WIDTH_BYTE ] != EXT_CSD_BUS_WIDTH_8_BIT )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( ( ExtCsd[ EXT_CSD_DEVICE_TYPE_BYTE ] &
( EXT_CSD_DEVICE_TYPE_SDR_1V8_HS200 |
EXT_CSD_DEVICE_TYPE_SDR_1V2_HS200 ) ) != 0U )
{
Status = XSdPs_Change_BusSpeed( InstancePtr );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Status = XSdPs_Get_Mmc_ExtCsd( InstancePtr, ExtCsd );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
if( ExtCsd[ EXT_CSD_HS_TIMING_BYTE ] != EXT_CSD_HS_TIMING_HS200 )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
}
Status = XSdPs_SetBlkSize( InstancePtr, XSDPS_BLK_SIZE_512_MASK );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
RETURN_PATH:
return Status;
}
/*****************************************************************************/
/**
*
* Identify type of card using CMD0 + CMD1 sequence
*
*
* @param InstancePtr is a pointer to the XSdPs instance.
*
******************************************************************************/
static s32 XSdPs_IdentifyCard( XSdPs * InstancePtr )
{
s32 Status;
u8 ReadReg;
Xil_AssertNonvoid( InstancePtr != NULL );
Xil_AssertNonvoid( InstancePtr->IsReady == XIL_COMPONENT_IS_READY );
/* 74 CLK delay after card is powered up, before the first command. */
#if defined( __arm__ ) || defined( __aarch64__ )
usleep( XSDPS_INIT_DELAY );
#endif
#ifdef __MICROBLAZE__
/* 2 msec delay */
MB_Sleep( 2 );
#endif
/* CMD0 no response expected */
Status = XSdPs_CmdTransfer( InstancePtr, CMD0, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Host High Capacity support & High voltage window */
Status = XSdPs_CmdTransfer( InstancePtr, CMD1,
XSDPS_ACMD41_HCS | XSDPS_CMD1_HIGH_VOL, 0U );
if( Status != XST_SUCCESS )
{
InstancePtr->CardType = XSDPS_CARD_SD;
}
else
{
InstancePtr->CardType = XSDPS_CARD_MMC;
}
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_NORM_INTR_STS_OFFSET, XSDPS_NORM_INTR_ALL_MASK );
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_ERR_INTR_STS_OFFSET, XSDPS_ERROR_INTR_ALL_MASK );
/* "Software reset for all" is initiated */
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress, XSDPS_SW_RST_OFFSET,
XSDPS_SWRST_CMD_LINE_MASK );
/* Proceed with initialization only after reset is complete */
ReadReg = XSdPs_ReadReg8( InstancePtr->Config.BaseAddress,
XSDPS_SW_RST_OFFSET );
while( ( ReadReg & XSDPS_SWRST_CMD_LINE_MASK ) != 0U )
{
ReadReg = XSdPs_ReadReg8( InstancePtr->Config.BaseAddress,
XSDPS_SW_RST_OFFSET );
}
Status = XST_SUCCESS;
RETURN_PATH:
return Status;
}
/*****************************************************************************/
/**
*
* Switches the SD card voltage from 3v3 to 1v8
*
*
* @param InstancePtr is a pointer to the XSdPs instance.
*
******************************************************************************/
#ifndef UHS_BROKEN
static s32 XSdPs_Switch_Voltage( XSdPs * InstancePtr )
{
s32 Status;
u16 CtrlReg;
u32 ReadReg;
/* Send switch voltage command */
Status = XSdPs_CmdTransfer( InstancePtr, CMD11, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
}
/* Wait for CMD and DATA line to go low */
ReadReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
while( ( ReadReg & ( XSDPS_PSR_CMD_SG_LVL_MASK |
XSDPS_PSR_DAT30_SG_LVL_MASK ) ) != 0U )
{
ReadReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
}
/* Stop the clock */
CtrlReg = XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_CLK_CTRL_OFFSET );
CtrlReg &= ~( XSDPS_CC_SD_CLK_EN_MASK | XSDPS_CC_INT_CLK_EN_MASK );
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress, XSDPS_CLK_CTRL_OFFSET,
CtrlReg );
/* Wait minimum 5mSec */
#if defined( __arm__ ) || defined( __aarch64__ )
( void ) usleep( 5000U );
#endif
#ifdef __MICROBLAZE__
MB_Sleep( 5U );
#endif
/* Enabling 1.8V in controller */
CtrlReg = XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_HOST_CTRL2_OFFSET );
CtrlReg |= XSDPS_HC2_1V8_EN_MASK;
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress, XSDPS_HOST_CTRL2_OFFSET,
CtrlReg );
/* Start clock */
Status = XSdPs_Change_ClkFreq( InstancePtr, XSDPS_CLK_400_KHZ );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Wait for CMD and DATA line to go high */
ReadReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
while( ( ReadReg & ( XSDPS_PSR_CMD_SG_LVL_MASK | XSDPS_PSR_DAT30_SG_LVL_MASK ) )
!= ( XSDPS_PSR_CMD_SG_LVL_MASK | XSDPS_PSR_DAT30_SG_LVL_MASK ) )
{
ReadReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
}
RETURN_PATH:
return Status;
}
#endif /* UHS_BROKEN */
s32 XSdPs_Wait_For( XSdPs * InstancePtr,
u32 Mask,
u32 Wait )
{
s32 Status = XST_SUCCESS;
u32 StatusReg;
#if ( ffconfigSDIO_DRIVER_USES_INTERRUPT == 0 )
u32 ulPollCount;
#endif
#if ( ffconfigSDIO_DRIVER_USES_INTERRUPT != 0 )
StatusReg = XSdPs_WaitInterrupt( InstancePtr, XSDPS_INTR_ERR_MASK | Mask, Wait );
if( ( StatusReg & Mask ) == 0 )
{
Status = XST_FAILURE;
}
#else
/*
* Check for transfer complete
* Polling for response for now
* Limit the time spent here with a simpler counter 'ulPollCount'
*/
ulPollCount = 0;
for( ; ; )
{
StatusReg = XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_NORM_INTR_STS_OFFSET );
if( ( StatusReg & XSDPS_INTR_ERR_MASK ) != 0U )
{
/* Write to clear error bits */
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_ERR_INTR_STS_OFFSET,
XSDPS_ERROR_INTR_ALL_MASK );
Status = XST_FAILURE;
break;
}
if( ( StatusReg & Mask ) != 0U )
{
/* Write to clear bit */
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_NORM_INTR_STS_OFFSET, Mask );
/* successful exit */
break;
}
/* Without some protection the code can easily
* get stuck here if the card is withdrawn. */
ulPollCount++;
if( ulPollCount == POLLCOUNT_MAX )
{
Status = XST_FAILURE;
break;
}
}
#endif /* ffconfigSDIO_DRIVER_USES_INTERRUPT */
return Status;
}
/*****************************************************************************/
/**
*
* This function does SD command generation.
*
* @param InstancePtr is a pointer to the instance to be worked on.
* @param Cmd is the command to be sent.
* @param Arg is the argument to be sent along with the command.
* This could be address or any other information
* @param BlkCnt - Block count passed by the user.
*
* @return
* - XST_SUCCESS if initialization was successful
* - XST_FAILURE if failure - could be because another transfer
* is in progress or command or data inhibit is set
*
******************************************************************************/
s32 XSdPs_CmdTransfer( XSdPs * InstancePtr,
u32 Cmd,
u32 Arg,
u32 BlkCnt )
{
u32 PresentStateReg;
u32 CommandReg;
s32 Status;
Xil_AssertNonvoid( InstancePtr != NULL );
Xil_AssertNonvoid( InstancePtr->IsReady == XIL_COMPONENT_IS_READY );
/*
* Check the command inhibit to make sure no other
* command transfer is in progress
*/
PresentStateReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
if( ( PresentStateReg & XSDPS_PSR_INHIBIT_CMD_MASK ) != 0U )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Write block count register */
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_BLK_CNT_OFFSET, ( u16 ) BlkCnt );
XSdPs_WriteReg8( InstancePtr->Config.BaseAddress,
XSDPS_TIMEOUT_CTRL_OFFSET, 0xEU );
/* Write argument register */
XSdPs_WriteReg( InstancePtr->Config.BaseAddress,
XSDPS_ARGMT_OFFSET, Arg );
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_NORM_INTR_STS_OFFSET, XSDPS_NORM_INTR_ALL_MASK );
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_ERR_INTR_STS_OFFSET, XSDPS_ERROR_INTR_ALL_MASK );
/* Command register is set to trigger transfer of command */
CommandReg = XSdPs_FrameCmd( InstancePtr, Cmd );
/*
* Mask to avoid writing to reserved bits 31-30
* This is necessary because 0x80000000 is used by this software to
* distinguish between ACMD and CMD of same number
*/
CommandReg = CommandReg & 0x3FFFU;
/* Check for data inhibit in case of command using DAT lines */
PresentStateReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
if( ( ( PresentStateReg & ( XSDPS_PSR_INHIBIT_DAT_MASK | XSDPS_PSR_INHIBIT_DAT_MASK ) ) != 0U ) &&
( ( CommandReg & XSDPS_DAT_PRESENT_SEL_MASK ) != 0U ) )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
#if ( ffconfigSDIO_DRIVER_USES_INTERRUPT != 0 )
XSdPs_ClearInterrupt( InstancePtr );
#endif
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress, XSDPS_CMD_OFFSET,
( u16 ) CommandReg );
Status = XSdPs_Wait_For( InstancePtr, XSDPS_INTR_CC_MASK, Cmd != CMD1 );
RETURN_PATH:
return Status;
}
/*****************************************************************************/
/**
* This function frames the Command register for a particular command.
* Note that this generates only the command register value i.e.
* the upper 16 bits of the transfer mode and command register.
* This value is already shifted to be upper 16 bits and can be directly
* OR'ed with transfer mode register value.
*
* @param Command to be sent.
*
* @return Command register value complete with response type and
* data, CRC and index related flags.
*
******************************************************************************/
u32 XSdPs_FrameCmd( XSdPs * InstancePtr,
u32 Cmd )
{
u32 RetVal;
RetVal = Cmd;
switch( Cmd )
{
case CMD0:
RetVal |= RESP_NONE;
break;
case CMD1:
RetVal |= RESP_R3;
break;
case CMD2:
RetVal |= RESP_R2;
break;
case CMD3:
RetVal |= RESP_R6;
break;
case CMD4:
RetVal |= RESP_NONE;
break;
case CMD5:
RetVal |= RESP_R1B;
break;
case CMD6:
if( InstancePtr->CardType == XSDPS_CARD_SD )
{
RetVal |= RESP_R1 | ( u32 ) XSDPS_DAT_PRESENT_SEL_MASK;
}
else
{
RetVal |= RESP_R1B;
}
break;
case ACMD6:
RetVal |= RESP_R1;
break;
case CMD7:
RetVal |= RESP_R1;
break;
case CMD8:
if( InstancePtr->CardType == XSDPS_CARD_SD )
{
RetVal |= RESP_R1;
}
else
{
RetVal |= RESP_R1 | ( u32 ) XSDPS_DAT_PRESENT_SEL_MASK;
}
break;
case CMD9:
RetVal |= RESP_R2;
break;
case CMD11:
case CMD10:
case CMD12:
case ACMD13:
case CMD16:
RetVal |= RESP_R1;
break;
case CMD17:
case CMD18:
case CMD19:
case CMD21:
RetVal |= RESP_R1 | ( u32 ) XSDPS_DAT_PRESENT_SEL_MASK;
break;
case CMD23:
case ACMD23:
case CMD24:
case CMD25:
RetVal |= RESP_R1 | ( u32 ) XSDPS_DAT_PRESENT_SEL_MASK;
case ACMD41:
RetVal |= RESP_R3;
break;
case ACMD42:
RetVal |= RESP_R1;
break;
case ACMD51:
RetVal |= RESP_R1 | ( u32 ) XSDPS_DAT_PRESENT_SEL_MASK;
break;
case CMD52:
case CMD55:
RetVal |= RESP_R1;
break;
case CMD58:
break;
default:
RetVal |= Cmd;
break;
}
return RetVal;
}
/*****************************************************************************/
/**
* This function performs SD read in polled mode.
*
* @param InstancePtr is a pointer to the instance to be worked on.
* @param Arg is the address passed by the user that is to be sent as
* argument along with the command.
* @param BlkCnt - Block count passed by the user.
* @param Buff - Pointer to the data buffer for a DMA transfer.
*
* @return
* - XST_SUCCESS if initialization was successful
* - XST_FAILURE if failure - could be because another transfer
* is in progress or command or data inhibit is set
*
******************************************************************************/
s32 XSdPs_ReadPolled( XSdPs * InstancePtr,
u32 Arg,
u32 BlkCnt,
u8 * Buff )
{
s32 Status;
u32 PresentStateReg;
if( InstancePtr->Config.CardDetect != 0U )
{
/* Check status to ensure card is initialized */
PresentStateReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
if( ( PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK ) == 0x0U )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
/* Set block size to 512 if not already set */
if( XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_BLK_SIZE_OFFSET ) != XSDPS_BLK_SIZE_512_MASK )
{
Status = XSdPs_SetBlkSize( InstancePtr,
XSDPS_BLK_SIZE_512_MASK );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
XSdPs_SetupADMA2DescTbl( InstancePtr, BlkCnt, Buff );
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_XFER_MODE_OFFSET,
XSDPS_TM_AUTO_CMD12_EN_MASK |
XSDPS_TM_BLK_CNT_EN_MASK | XSDPS_TM_DAT_DIR_SEL_MASK |
XSDPS_TM_DMA_EN_MASK | XSDPS_TM_MUL_SIN_BLK_SEL_MASK );
if( ucIsCachedMemory( ( const uint8_t * ) Buff ) != 0 )
{
Xil_DCacheInvalidateRange( ( unsigned ) Buff, BlkCnt * XSDPS_BLK_SIZE_512_MASK );
}
/* Send block read command */
Status = XSdPs_CmdTransfer( InstancePtr, CMD18, Arg, BlkCnt );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Status = XSdPs_Wait_For( InstancePtr, XSDPS_INTR_TC_MASK, pdTRUE );
if( Status != XST_SUCCESS )
{
goto RETURN_PATH;
}
XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET );
RETURN_PATH:
return Status;
}
/*****************************************************************************/
/**
* This function performs SD write in polled mode.
*
* @param InstancePtr is a pointer to the instance to be worked on.
* @param Arg is the address passed by the user that is to be sent as
* argument along with the command.
* @param BlkCnt - Block count passed by the user.
* @param Buff - Pointer to the data buffer for a DMA transfer.
*
* @return
* - XST_SUCCESS if initialization was successful
* - XST_FAILURE if failure - could be because another transfer
* is in progress or command or data inhibit is set
*
******************************************************************************/
uint32_t ulSDWritePause = ffconfigWRITE_PAUSE_USEC;
u32 XSdPs_ReadStatus( XSdPs * InstancePtr )
{
u32 Status;
/* Send block write command */
Status = XSdPs_CmdTransfer( InstancePtr, CMD13, ( InstancePtr->RelCardAddr ), 0UL );
if( Status != XST_SUCCESS )
{
Status = 0x00UL;
goto RETURN_PATH;
}
Status = ( s32 ) XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET );
RETURN_PATH:
return Status;
}
s32 XSdPs_WritePolled( XSdPs * InstancePtr,
u32 Arg,
u32 BlkCnt,
const u8 * Buff )
{
s32 Status;
u32 PresentStateReg;
if( InstancePtr->Config.CardDetect != 0U )
{
/* Check status to ensure card is initialized */
PresentStateReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
if( ( PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK ) == 0x0U )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
/* Set block size to 512 if not already set */
if( XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_BLK_SIZE_OFFSET ) != XSDPS_BLK_SIZE_512_MASK )
{
Status = XSdPs_SetBlkSize( InstancePtr,
XSDPS_BLK_SIZE_512_MASK );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
XSdPs_SetupADMA2DescTbl( InstancePtr, BlkCnt, Buff );
if( ucIsCachedMemory( ( const uint8_t * ) Buff ) != 0 )
{
Xil_DCacheFlushRange( ( unsigned ) Buff, BlkCnt * XSDPS_BLK_SIZE_512_MASK );
}
if( ulSDWritePause != 0ul )
{
/* Wait for halve a ms.
* This 'solution' is still under contruction. */
uint64_t ullLastTime = ullGetHighResolutionTime();
uint64_t ullNow;
XSdPs_ReadStatus( InstancePtr );
for( ; ; )
{
ullNow = ullGetHighResolutionTime();
if( ( ullNow - ullLastTime ) > ulSDWritePause )
{
ullLastTime = ullNow;
break;
}
}
XSdPs_ReadStatus( InstancePtr );
}
else
{
XSdPs_ReadStatus( InstancePtr );
}
XSdPs_WriteReg16( InstancePtr->Config.BaseAddress,
XSDPS_XFER_MODE_OFFSET,
XSDPS_TM_AUTO_CMD12_EN_MASK |
XSDPS_TM_BLK_CNT_EN_MASK |
XSDPS_TM_MUL_SIN_BLK_SEL_MASK | XSDPS_TM_DMA_EN_MASK );
/* Send block write command */
Status = XSdPs_CmdTransfer( InstancePtr, CMD25, Arg, BlkCnt );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
Status = XSdPs_Wait_For( InstancePtr, XSDPS_INTR_TC_MASK, pdTRUE );
RETURN_PATH:
return Status;
}
/*****************************************************************************/
/**
*
* Selects card and sets default block size
*
*
* @param InstancePtr is a pointer to the XSdPs instance.
*
* @return
* - XST_SUCCESS if successful.
* - XST_FAILURE if fail.
*
* @note None.
*
******************************************************************************/
s32 XSdPs_Select_Card( XSdPs * InstancePtr )
{
s32 Status = 0;
/* Send CMD7 - Select card */
Status = XSdPs_CmdTransfer( InstancePtr, CMD7,
InstancePtr->RelCardAddr, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
RETURN_PATH:
return Status;
}
/*****************************************************************************/
/**
*
* API to setup ADMA2 descriptor table
*
*
* @param InstancePtr is a pointer to the XSdPs instance.
* @param BlkCnt - block count.
* @param Buff pointer to data buffer.
*
* @return None
*
* @note None.
*
******************************************************************************/
void XSdPs_SetupADMA2DescTbl( XSdPs * InstancePtr,
u32 BlkCnt,
const u8 * Buff )
{
u32 TotalDescLines = 0U;
u32 DescNum = 0U;
u32 BlkSize = 0U;
/* Setup ADMA2 - Write descriptor table and point ADMA SAR to it */
BlkSize = XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_BLK_SIZE_OFFSET );
BlkSize = BlkSize & XSDPS_BLK_SIZE_MASK;
if( ( BlkCnt * BlkSize ) < XSDPS_DESC_MAX_LENGTH )
{
TotalDescLines = 1U;
}
else
{
TotalDescLines = ( ( BlkCnt * BlkSize ) / XSDPS_DESC_MAX_LENGTH );
if( ( ( BlkCnt * BlkSize ) % XSDPS_DESC_MAX_LENGTH ) != 0U )
{
TotalDescLines += 1U;
}
}
for( DescNum = 0U; DescNum < ( TotalDescLines - 1 ); DescNum++ )
{
InstancePtr->Adma2_DescrTbl[ DescNum ].Address =
( u32 ) ( Buff + ( DescNum * XSDPS_DESC_MAX_LENGTH ) );
InstancePtr->Adma2_DescrTbl[ DescNum ].Attribute =
XSDPS_DESC_TRAN | XSDPS_DESC_VALID;
/* This will write '0' to length field which indicates 65536 */
InstancePtr->Adma2_DescrTbl[ DescNum ].Length =
( u16 ) XSDPS_DESC_MAX_LENGTH;
}
InstancePtr->Adma2_DescrTbl[ TotalDescLines - 1 ].Address =
( u32 ) ( Buff + ( DescNum * XSDPS_DESC_MAX_LENGTH ) );
InstancePtr->Adma2_DescrTbl[ TotalDescLines - 1 ].Attribute =
XSDPS_DESC_TRAN | XSDPS_DESC_END | XSDPS_DESC_VALID;
InstancePtr->Adma2_DescrTbl[ TotalDescLines - 1 ].Length =
( BlkCnt * BlkSize ) - ( DescNum * XSDPS_DESC_MAX_LENGTH );
XSdPs_WriteReg( InstancePtr->Config.BaseAddress, XSDPS_ADMA_SAR_OFFSET,
( u32 ) & ( InstancePtr->Adma2_DescrTbl[ 0 ] ) );
if( ucIsCachedMemory( ( const uint8_t * ) InstancePtr->Adma2_DescrTbl ) != 0 )
{
Xil_DCacheFlushRange( ( unsigned ) &( InstancePtr->Adma2_DescrTbl[ 0 ] ),
sizeof( XSdPs_Adma2Descriptor ) * 32 );
}
}
/*****************************************************************************/
/**
* Mmc initialization is done in this function
*
*
* @param InstancePtr is a pointer to the instance to be worked on.
*
* @return
* - XST_SUCCESS if initialization was successful
* - XST_FAILURE if failure - could be because
* a) MMC is already initialized
* b) There is no card inserted
* c) One of the steps (commands) in the initialization
* cycle failed
* @note This function initializes the SD card by following its
* initialization and identification state diagram.
* CMD0 is sent to reset card.
* CMD1 sent to identify voltage and high capacity support
* CMD2 and CMD3 are sent to obtain Card ID and
* Relative card address respectively.
* CMD9 is sent to read the card specific data.
*
******************************************************************************/
s32 XSdPs_MmcCardInitialize( XSdPs * InstancePtr )
{
u32 PresentStateReg;
s32 Status;
u32 RespOCR;
u32 CSD[ 4 ];
Xil_AssertNonvoid( InstancePtr != NULL );
Xil_AssertNonvoid( InstancePtr->IsReady == XIL_COMPONENT_IS_READY );
if( InstancePtr->Config.CardDetect != 0U )
{
/*
* Check the present state register to make sure
* card is inserted and detected by host controller
*/
PresentStateReg = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_PRES_STATE_OFFSET );
if( ( PresentStateReg & XSDPS_PSR_CARD_INSRT_MASK ) == 0U )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
}
/* CMD0 no response expected */
Status = XSdPs_CmdTransfer( InstancePtr, CMD0, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
RespOCR = 0U;
/* Send CMD1 while card is still busy with power up */
while( ( RespOCR & XSDPS_RESPOCR_READY ) == 0U )
{
/* Host High Capacity support & High volage window */
Status = XSdPs_CmdTransfer( InstancePtr, CMD1,
XSDPS_ACMD41_HCS | XSDPS_CMD1_HIGH_VOL, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Response with card capacity */
RespOCR = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET );
}
/* Update HCS support flag based on card capacity response */
if( ( RespOCR & XSDPS_ACMD41_HCS ) != 0U )
{
InstancePtr->HCS = 1U;
}
/* CMD2 for Card ID */
Status = XSdPs_CmdTransfer( InstancePtr, CMD2, 0U, 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
InstancePtr->CardID[ 0 ] =
XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET );
InstancePtr->CardID[ 1 ] =
XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_RESP1_OFFSET );
InstancePtr->CardID[ 2 ] =
XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_RESP2_OFFSET );
InstancePtr->CardID[ 3 ] =
XSdPs_ReadReg16( InstancePtr->Config.BaseAddress,
XSDPS_RESP3_OFFSET );
/* Set relative card address */
InstancePtr->RelCardAddr = 0x12340000U;
Status = XSdPs_CmdTransfer( InstancePtr, CMD3, ( InstancePtr->RelCardAddr ), 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/* Read Card specific data. */
Status = XSdPs_CmdTransfer( InstancePtr, CMD9, ( InstancePtr->RelCardAddr ), 0U );
if( Status != XST_SUCCESS )
{
Status = XST_FAILURE;
goto RETURN_PATH;
}
/*
* Card specific data is read.
* Currently not used for any operation.
*/
CSD[ 0 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP0_OFFSET );
CSD[ 1 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP1_OFFSET );
CSD[ 2 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP2_OFFSET );
CSD[ 3 ] = XSdPs_ReadReg( InstancePtr->Config.BaseAddress,
XSDPS_RESP3_OFFSET );
( void ) CSD[ 0 ];
Status = XST_SUCCESS;
RETURN_PATH:
return Status;
}
/** @} */