/* * FreeRTOS V202012.00 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a copy of * this software and associated documentation files (the "Software"), to deal in * the Software without restriction, including without limitation the rights to * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of * the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * https://www.FreeRTOS.org * https://github.com/FreeRTOS * */ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. * * See https://www.freertos.org/a00110.html *----------------------------------------------------------*/ #define configUSE_PREEMPTION 1 #define configUSE_TIME_SLICING 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 #define configCHECK_FOR_STACK_OVERFLOW 2 #define configUSE_IDLE_HOOK 0 #define configUSE_TICK_HOOK 0 #define configUSE_DAEMON_TASK_STARTUP_HOOK 0 #define configCPU_CLOCK_HZ ( ( unsigned long ) 20000000 ) #define configTICK_RATE_HZ ( ( TickType_t ) 1000 ) #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 500 ) #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 120000 ) ) #define configMAX_TASK_NAME_LEN ( 10 ) #define configUSE_TRACE_FACILITY 1 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 0 #define configUSE_CO_ROUTINES 0 #define configMAX_PRIORITIES ( 10 ) #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) #define configTIMER_QUEUE_LENGTH 20 #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) #define configUSE_COUNTING_SEMAPHORES 1 #define configSUPPORT_DYNAMIC_ALLOCATION 1 #define configSUPPORT_STATIC_ALLOCATION 1 #define configNUM_TX_DESCRIPTORS 15 #define configSTREAM_BUFFER_TRIGGER_LEVEL_TEST_MARGIN 2 /* Set the following definitions to 1 to include the API function, or zero to exclude the API function. */ #define configUSE_MALLOC_FAILED_HOOK 1 #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_TIMERS 1 #define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 5 ) #define INCLUDE_vTaskPrioritySet 1 #define INCLUDE_uxTaskPriorityGet 1 #define INCLUDE_vTaskDelete 1 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_vTaskPrioritySet 1 #define INCLUDE_uxTaskPriorityGet 1 #define INCLUDE_vTaskDelete 1 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_uxTaskGetStackHighWaterMark 1 #define INCLUDE_uxTaskGetStackHighWaterMark2 1 #define INCLUDE_xTaskGetSchedulerState 1 #define INCLUDE_xTimerGetTimerDaemonTaskHandle 1 #define INCLUDE_xTaskGetIdleTaskHandle 1 #define INCLUDE_xTaskGetHandle 1 #define INCLUDE_eTaskGetState 1 #define INCLUDE_xSemaphoreGetMutexHolder 1 #define INCLUDE_xTimerPendFunctionCall 1 #define INCLUDE_xTaskAbortDelay 1 #define configKERNEL_INTERRUPT_PRIORITY 255 /* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ #define configMAX_SYSCALL_INTERRUPT_PRIORITY 191 void vAssertCalled( const char * pcFile, uint32_t ulLine ); #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ) #define configQUEUE_REGISTRY_SIZE 0 /* Application specific definitions follow. **********************************/ #define configMAC_INTERRUPT_PRIORITY 255 /* Default MAC address configuration. The demo creates a virtual network * connection that uses this MAC address by accessing the raw Ethernet/WiFi data * to and from a real network connection on the host PC. See the * configNETWORK_INTERFACE_TO_USE definition above for information on how to * configure the real network connection to use. */ #define configMAC_ADDR0 0x00 #define configMAC_ADDR1 0x54 #define configMAC_ADDR2 0x00 #define configMAC_ADDR3 0x12 #define configMAC_ADDR4 0x34 #define configMAC_ADDR5 0xad /* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configIP_ADDR0 10 #define configIP_ADDR1 0 #define configIP_ADDR2 0 #define configIP_ADDR3 200 /* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to * 0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configGATEWAY_ADDR0 10 #define configGATEWAY_ADDR1 0 #define configGATEWAY_ADDR2 0 #define configGATEWAY_ADDR3 1 /* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and * 208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set * to 1 but a DNS server cannot be contacted.*/ #define configDNS_SERVER_ADDR0 8 #define configDNS_SERVER_ADDR1 8 #define configDNS_SERVER_ADDR2 8 #define configDNS_SERVER_ADDR3 8 /* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configNET_MASK0 255 #define configNET_MASK1 255 #define configNET_MASK2 255 #define configNET_MASK3 0 /* This initialisation is specific to running this demo in QEMU. */ #include "CMSIS/SMM_MPS2.h" #define configBUILD_SPECIFIC_INITIALISATION() \ NVIC_DisableIRQ( ETHERNET_IRQn ); \ NVIC_SetPriority( ETHERNET_IRQn, configMAC_INTERRUPT_PRIORITY ); #include "logging_config.h" #endif /* FREERTOS_CONFIG_H */