/*
 * FreeRTOS V202111.00
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

#ifndef DEMO_CONFIG_H
#define DEMO_CONFIG_H

/* FreeRTOS include. */
#include "FreeRTOS.h"

/**************************************************/
/******* DO NOT CHANGE the following order ********/
/**************************************************/

/* Include logging header files and define logging macros in the following order:
 * 1. Include the header file "logging_levels.h".
 * 2. Define the LIBRARY_LOG_NAME and LIBRARY_LOG_LEVEL macros depending on
 * the logging configuration for DEMO.
 * 3. Include the header file "logging_stack.h", if logging is enabled for DEMO.
 */

#include "logging_levels.h"

/* Logging configuration for the Demo. */
#ifndef LIBRARY_LOG_NAME
#define LIBRARY_LOG_NAME    "MQTTDemo"
#endif

#ifndef LIBRARY_LOG_LEVEL
#define LIBRARY_LOG_LEVEL    LOG_INFO
#endif

#include "logging.h"


/************ End of logging configuration ****************/


/**
 * @brief Server's root CA certificate.
 *
 * For AWS IoT MQTT broker, this certificate is used to identify the AWS IoT
 * server and is publicly available. Refer to the AWS documentation available
 * in the link below.
 * https://docs.aws.amazon.com/iot/latest/developerguide/server-authentication.html#server-authentication-certs
 *
 * @note This certificate should be PEM-encoded.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN CERTIFICATE-----\n"\
 * "...base64 data...\n"\
 * "-----END CERTIFICATE-----\n"
 *
 *
 */
#define democonfigROOT_CA_PEM                                            \
    "-----BEGIN CERTIFICATE-----\n"                                      \
    "MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF\n" \
    "ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6\n" \
    "b24gUm9vdCBDQSAxMB4XDTE1MDUyNjAwMDAwMFoXDTM4MDExNzAwMDAwMFowOTEL\n" \
    "MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv\n" \
    "b3QgQ0EgMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALJ4gHHKeNXj\n" \
    "ca9HgFB0fW7Y14h29Jlo91ghYPl0hAEvrAIthtOgQ3pOsqTQNroBvo3bSMgHFzZM\n" \
    "9O6II8c+6zf1tRn4SWiw3te5djgdYZ6k/oI2peVKVuRF4fn9tBb6dNqcmzU5L/qw\n" \
    "IFAGbHrQgLKm+a/sRxmPUDgH3KKHOVj4utWp+UhnMJbulHheb4mjUcAwhmahRWa6\n" \
    "VOujw5H5SNz/0egwLX0tdHA114gk957EWW67c4cX8jJGKLhD+rcdqsq08p8kDi1L\n" \
    "93FcXmn/6pUCyziKrlA4b9v7LWIbxcceVOF34GfID5yHI9Y/QCB/IIDEgEw+OyQm\n" \
    "jgSubJrIqg0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC\n" \
    "AYYwHQYDVR0OBBYEFIQYzIU07LwMlJQuCFmcx7IQTgoIMA0GCSqGSIb3DQEBCwUA\n" \
    "A4IBAQCY8jdaQZChGsV2USggNiMOruYou6r4lK5IpDB/G/wkjUu0yKGX9rbxenDI\n" \
    "U5PMCCjjmCXPI6T53iHTfIUJrU6adTrCC2qJeHZERxhlbI1Bjjt/msv0tadQ1wUs\n" \
    "N+gDS63pYaACbvXy8MWy7Vu33PqUXHeeE6V/Uq2V8viTO96LXFvKWlJbYK8U90vv\n" \
    "o/ufQJVtMVT8QtPHRh8jrdkPSHCa2XV4cdFyQzR1bldZwgJcJmApzyMZFo6IQ6XU\n" \
    "5MsI+yMRQ+hDKXJioaldXgjUkK642M4UwtBV8ob2xJNDd2ZhwLnoQdeXeGADbkpy\n" \
    "rqXRfboQnoZsG4q5WTP468SQvvG5\n"                                     \
    "-----END CERTIFICATE-----\n"                                        \
    "-----BEGIN CERTIFICATE-----\n"                                      \
    "MIIE0zCCA7ugAwIBAgIQGNrRniZ96LtKIVjNzGs7SjANBgkqhkiG9w0BAQUFADCB\n" \
    "yjELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQL\n" \
    "ExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJp\n" \
    "U2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxW\n" \
    "ZXJpU2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0\n" \
    "aG9yaXR5IC0gRzUwHhcNMDYxMTA4MDAwMDAwWhcNMzYwNzE2MjM1OTU5WjCByjEL\n" \
    "MAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZW\n" \
    "ZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJpU2ln\n" \
    "biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJp\n" \
    "U2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9y\n" \
    "aXR5IC0gRzUwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCvJAgIKXo1\n" \
    "nmAMqudLO07cfLw8RRy7K+D+KQL5VwijZIUVJ/XxrcgxiV0i6CqqpkKzj/i5Vbex\n" \
    "t0uz/o9+B1fs70PbZmIVYc9gDaTY3vjgw2IIPVQT60nKWVSFJuUrjxuf6/WhkcIz\n" \
    "SdhDY2pSS9KP6HBRTdGJaXvHcPaz3BJ023tdS1bTlr8Vd6Gw9KIl8q8ckmcY5fQG\n" \
    "BO+QueQA5N06tRn/Arr0PO7gi+s3i+z016zy9vA9r911kTMZHRxAy3QkGSGT2RT+\n" \
    "rCpSx4/VBEnkjWNHiDxpg8v+R70rfk/Fla4OndTRQ8Bnc+MUCH7lP59zuDMKz10/\n" \
    "NIeWiu5T6CUVAgMBAAGjgbIwga8wDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8E\n" \
    "BAMCAQYwbQYIKwYBBQUHAQwEYTBfoV2gWzBZMFcwVRYJaW1hZ2UvZ2lmMCEwHzAH\n" \
    "BgUrDgMCGgQUj+XTGoasjY5rw8+AatRIGCx7GS4wJRYjaHR0cDovL2xvZ28udmVy\n" \
    "aXNpZ24uY29tL3ZzbG9nby5naWYwHQYDVR0OBBYEFH/TZafC3ey78DAJ80M5+gKv\n" \
    "MzEzMA0GCSqGSIb3DQEBBQUAA4IBAQCTJEowX2LP2BqYLz3q3JktvXf2pXkiOOzE\n" \
    "p6B4Eq1iDkVwZMXnl2YtmAl+X6/WzChl8gGqCBpH3vn5fJJaCGkgDdk+bW48DW7Y\n" \
    "5gaRQBi5+MHt39tBquCWIMnNZBU4gcmU7qKEKQsTb47bDN0lAtukixlE0kF6BWlK\n" \
    "WE9gyn6CagsCqiUXObXbf+eEZSqVir2G3l6BFoMtEMze/aiCKm0oHw0LxOXnGiYZ\n" \
    "4fQRbxC1lfznQgUy286dUV4otp6F01vvpX1FQHKOtw5rDgb7MzVIcbidJ4vEZV8N\n" \
    "hnacRHr2lVz2XTIIM6RUthg/aFzyQkqFOFSDX9HoLPKsEdao7WNq\n"             \
    "-----END CERTIFICATE-----\n"

/**
 * @brief An option to disable Server Name Indication.
 *
 * @note When using a local Mosquitto server setup, SNI needs to be disabled
 * for an MQTT broker that only has an IP address but no hostname. However,
 * SNI should be enabled whenever possible.
 */
#define democonfigDISABLE_SNI                ( pdFALSE )

/**
 * @brief Configuration that indicates if the demo connection is made to the AWS IoT Core MQTT broker.
 *
 * If username/password based authentication is used, the demo will use appropriate TLS ALPN and
 * SNI configurations as required for the Custom Authentication feature of AWS IoT.
 * For more information, refer to the following documentation:
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-auth.html#custom-auth-mqtt
 *
 * #define democonfigUSE_AWS_IOT_CORE_BROKER    ( 1 )
 */
#define democonfigUSE_AWS_IOT_CORE_BROKER    ( 1 )

/**
 * @brief The username value for authenticating client to the MQTT broker when
 * username/password based client authentication is used.
 *
 * For AWS IoT MQTT broker, refer to the AWS IoT documentation below for
 * details regarding client authentication with a username and password.
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-authentication.html
 * An authorizer setup needs to be done, as mentioned in the above link, to use
 * username/password based client authentication.
 *
 * #define democonfigCLIENT_USERNAME    "...insert here..."
 */

/**
 * @brief The password value for authenticating client to the MQTT broker when
 * username/password based client authentication is used.
 *
 * For AWS IoT MQTT broker, refer to the AWS IoT documentation below for
 * details regarding client authentication with a username and password.
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-authentication.html
 * An authorizer setup needs to be done, as mentioned in the above link, to use
 * username/password based client authentication.
 *
 * #define democonfigCLIENT_PASSWORD    "...insert here..."
 */

/**
 * @brief The name of the operating system that the application is running on.
 * The current value is given as an example. Please update for your specific
 * operating system.
 */
#define democonfigOS_NAME                   "FreeRTOS"

/**
 * @brief The version of the operating system that the application is running
 * on. The current value is given as an example. Please update for your specific
 * operating system version.
 */
#define democonfigOS_VERSION                tskKERNEL_VERSION_NUMBER

/**
 * @brief The name of the hardware platform the application is running on. The
 * current value is given as an example. Please update for your specific
 * hardware platform.
 */
#define democonfigHARDWARE_PLATFORM_NAME    "NXPRT1060"

/**
 * @brief The name of the MQTT library used and its version, following an "@"
 * symbol.
 */
#include "core_mqtt.h" /* Include coreMQTT header for MQTT_LIBRARY_VERSION macro. */
#define democonfigMQTT_LIB    "core-mqtt@"MQTT_LIBRARY_VERSION

/**
 * @brief The MQTT metrics string expected by AWS IoT.
 */
#define AWS_IOT_METRICS_STRING                                 \
    "?SDK=" democonfigOS_NAME "&Version=" democonfigOS_VERSION \
    "&Platform=" democonfigHARDWARE_PLATFORM_NAME "&MQTTLib=" democonfigMQTT_LIB

/**
 * @brief Set the stack size of the main demo task.
 *
 * In the Windows port, this stack only holds a structure. The actual
 * stack is created by an operating system thread.
 */
#define democonfigDEMO_STACKSIZE        configMINIMAL_STACK_SIZE

/**
 * @brief Set the stack size of the main demo task.
 *
 * In the Windows port, this stack only holds a structure. The actual
 * stack is created by an operating system thread.
 */
#define democonfigDEMO_TASK_PRIORITY    ( tskIDLE_PRIORITY + 1 )

#endif /* DEMO_CONFIG_H */