Board: ARM AVH_MPS2_Cortex-M7
----------------------------------------------

MPS2 platform for Cortex-M7 simulated by Arm Virtual Hardware Targets (VHT).

Running the VHT in uVision requires the following settings:
 - open "Options for Target"
 - select "Debug" tab
 - under "Use" select "Models Cortex-M Debugger" and click "Settings" end enter the following:
   - Command: $KARM\VHT\VHT_MPS2_Cortex-M7_MDK.exe
   - Target: armcortexm7ct
   - Configuration File: fvp_config.txt

Running the VHT via command line (from project root directory and VHT executable in path):
`VHT_MPS2_Cortex-M7_MDK -f fvp_config.txt -C fvp_mps2.mps2_visualisation.disable-visualisation=1 -C fvp_mps2.telnetterminal0.start_telnet=0 -C fvp_mps2.UART0.out_file=- -a <image>`

The heap/stack setup and the CMSIS-Driver assignment is in configuration files of related software components.

### System Configuration

| System Component        | Setting
|:------------------------|:----------------------------------------
| Device                  | CMSDK_CM7_DP_VHT
| Clock                   | 25 MHz
| Heap                    | 64 kB (configured in linker scatter file)
| Stack (MSP)             | 1 kB  (configured in linker scatter file)

**STDIO** is routed to USART0

### CMSIS-Driver mapping

| CMSIS-Driver | Peripheral
|:-------------|:----------
| ETH_MAC0     | Ethernet LAN91C111
| ETH_PHY0     | Ethernet LAN91C111
| USART0       | USART0
| VIO          | VHT VIO